Construction of new electrical Substation at Balijhara , Paradip Port.

Amount

Providing single under reamed bored compaction pile foundation of 300mm dia & 9m length long with reinforced cement concrete of M-20 grade using 12mm size black hard granite (C.B) stone chips, boring from existing ground level with removal of obstruction if any, using bentonite,providing required reinforcement as per drawing making the end of the cage to Conical shape, welded properly, providing 750mmdia under ream at appropriate level and disposal the boring earth from work site with supply of all labour, T&P, taxes, Port enry fees, hire & running charges of all machineries reuqired for the work etc. transportation charges all taxes etc.complete by excluding GST as directed by the Engineer-in-charge.(excluding cost of reinforcement steel and binding wire).

Cutting pile head up to cut off level including disposing of the dismantled material out of work site with supply of all materials, labour, T&P, royalties,tollages, hire & running charges of all machineries, transportation charges, all taxes excluding GST etc all complete as directed by the Engineer-in-charge.

Initial load test for pile including kenteledge of required load and supply of all testing equipments including construction of test pile cap and dismantling the same after completion of test and submitting the test report as per ISI 2911(PT-IV) with supply of all labour ,materials ,taxes ,tollage ,royalties, transportation ,T&P etc complete exlcuding GST and as per direction of engineer in charge.

Routine Laoad test for working pile including kenteledge of required load and supply of all testing equiments including construction of test pile cap and dismantling the same after completion of test and submitting the test report as per ISI 2911(PT-IV) with supply of all labour ,materials ,taxex ,tollage ,royalties, transportation ,T&P etc complete exlcuding GST and as per direction of engineer in charge.

Earth work in all kind of soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles with supply of all material labour transporation , taxes , tollage , royalties etc all complete but excluding GST as directed by EIC.

Filling in foundation and plinth with excavated materials moorum including watering and ramming with supply of all material labour transporation , taxes , tollage , royalties etc all complete but excluding GST as directed by EIC. as directed by the Engineer-in-charge

Filling the saline sand/dredged spoil and conveying the same by private trucks with all lead and lifts , including spreading, leveling,watering, ramming, consolidating with supply of all material, labour, transportation , T&P, taxes , tollage , royalties etc all complete but excluding GST as directed by the Engineer-in-charge. (NB 10% voids will be deducted from the measured quantity)

P.C.C(1:3:6) of using 40mm. & down C.B.G chips of approved quality in foundation & plinth including mixing hosting, laying to proper level & slope consolidating, curing, watering charges etc. complete including cost & supply of all materials, labour, T&P, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC

Cement concrete (1:1.5:3) using 12mm to 20mm size C.B.G. chips for all floors, foundation & plinth etc. of approved quality mixing, hoisting, laying, compacting, curing with supply of all materials, labour, T&P, taxes, tollage transportations, staging, scaffolding, curing, etc. all complete but excluding GST as per direction of Engineer-in-charge.

For Ground Floor

For First Floor

Supply Tor/TMT steel manufactured by SAIL/TISCON/VIGAC Steel of Fe-500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works including binding the grills with binding wire of 18 to 20 gauge including cost of steel, all labour, materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. (NB: No payment shall be made for extra weight than theoretical co-efficient).

Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank of approved quality for R.C.C. structures and deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in-charge.

R.C.C. foundation and footing bases of columns mass concrete & pre-cast slab etc.

Beam, column, girder (GF)

Beam, column, girder (FF)

Lintel (GF)

Lintel (FF)

Roof slab, landing, projection Chajja upto 4.30 mtr. (GF)

Roof slab, landing, projection Chajja upto 4.30 mtr. (FF)

Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m cleaning the debrises with supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge

Dismantling and removing R.C.C. columns, beams, slab, staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50m cleaning the debrises with with supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes,, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge.

Brick work in Fly Ash Bricks of size 25cmx12cmx8cm having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding GST as per direction of Engineer-in-charge

For F&P

For Ground Floor

For First Floor

12 MM thick Cement plaster with cement mortar (1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge

For Ground Floor

For First Floor

16 MM thick Cement plaster with cement mortar (1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge.

For Ground Floor

For First Floor

6 MM thick Cement plaster with cement mortar (1:4) proportion, over RCC work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge

For Ground Floor

For First Floor

Neat cement punning over cement plaster using cement @2.20 kg/m2 & curing with supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge.

P.C.C(1:2:4) of using 20 mm. & down C.B.G chips of approved quality in foundation & plinth including mixing hosting, laying to proper level & slope consolidating, curing, watering charges etc. complete including cost & supply of all materials, labour, T&P, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC.

25mm. (av) thick graded cement concrete in C.C.(1:2:4) using 12mm. to 6mm. size hard granite chips of approved quality including cleaning the roof top, washing, mixing, hoisting laying to proper level slope, gradient making rounding hunching at the corners, joints, finished smooth to exposed surface over 2 coats of sika topseal-107 or equivalent as water proofing course with supply of all materials, labour, T&P, taxes, tollage transportations, staging, scaffolding, curing, etc. all complete but excluding GST as per direction of Engineer-in-charge. (New work)

For First Floor

Supply,fitting,fixing of rain water PVC pipe 110mm dia of approved quality,hoisting in position where found necessary in CM(1:4) including cutting of grooves and supply of all labour, materials, accessories fittings for laying of pipe, T&P,all taxes,transportation,staging, scaffolding etc. excluding cost of GST complete as directed by Engineer-in-charge.

25mm. thick A.S. flooring in cement concrete (1:2:4) at all floors & levels using 12mm. and down grade hard black C.B granite chips of approved quality including mixing, hoisting, laying, compacting, curing, finished smooth to the exposed surface with a floating coat of cement punning, rounding the corners where found necessary including supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete but excluding GST asdirected by Engineer-in-charge. (New Work)

Providing, supplying, fitting, fixing of M.S./GI grills for windows of approved quality & design including fabrication charges, with supply of labour and material,machinery, cost of fuel, electrode, gas, consumables hire and running charges of all kind of equipments,taxes,tollages etc all complete but excluding GST as per direction of Engineer-in-charge.

Supplying fitting & fixing of stainless steel gate of GR-304, required size with square bar , plate as approved design including cost & supply of all materials, labours, T&P, all transportation, staging, scaffoldings, , taxes if any excluding GST, fabricating, polishing, denting to the gates etc. all Complete as per direction of the Engineer- In-charge.

Supplying,fitting fixing of GI Pipe Gate & shed of approved design with 50mm, 40mm and 25mm dia pipe of medium quality of approved design & necessary fittings,clamps,locking arrangement etc.with cost of loading & un-loading, stacking, all complete including cost and supply of all materials, T&P, all taxes, transportation etc. complete excluding GST as per direction of Engineer -in- charge.

50mm dia GI pipe (Medium)

40mm dia GI pipe (Medium)

Fabrication Charges

Providing fitting, fixing of Al. door with anodized Al. door section No. 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and size of the aluminium section is 125 mm x 37 mm x 1.50 mm and 12mm thick pre-laminated board on bottom & 6 mm plain glass on top fixed door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including providing rubber beading, aluminum U channels, angle, clips, required nos. of handles, tower bolts, hooks, mortise lock & hydraulic door stopper as per relevant I.S. specification, etc. all finished including supply of all labour, materials, scaffolding up to any height transportation charges T&P, all taxes etc. complete by excluding GST as directed by the Engineer-in-charge.

Supplying, fitting, fixing up AL window (sliding type) made up aluminum Section 9778 as window fram, section No. 4095, 4096 & 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting including supply of all labour, materials, scaffolding up to any height transportation charges T&P, all taxes etc. complete by excluding GST as directed by the Engineer-in-charge.

Supplying, fitting & fixing of WPC door and window frames of required size as per requirment with required staging, scaffolding, including all leads & lifts, transportation charges with supply of all labour, T&P, all taxes Excluding cost of GST. etc. all complete as per direction of Engineer-in-charge

Supplying fitting and fixing of 32mm thick WPC door/ window shutters including cost of loading & un-loading charges, stacking at departmental stores with supply of all labour, materials like hinges, towe bolt, handle, aldrop etc. T&P, transportation, all taxes Excluding cost of GST etc. all complete as per direction of Engineer-in-charge.

Dewatering the accumulated water during earth work by deploying 5 HP Diesel pumps for smooth running of work with supply, hire & running charges of diesel pumps, fuel, required pipes, lubricants, operator and expenses etc including to and fro transportation charges, T&P, Port entry fees, all taxes excluding GST etc complete as directed by the Engineer-in-charge. (N.B:- No idle charges for pump shall be paid.)

Supplying fitting fixing of chequred tiles as apporved by EIC( premimum Quality )in floors , treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete but excluding GST asdirected by Engineer-in-charge.

Supplying fitting fixing of 8mm thick ceramic floor tiles ( premimum Quality 300 x300 mm or 400 x 400 mm size)in floors, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete but excluding GST asdirected by Engineer-in-charge .( New work)

For First Floor

Supplying fitting fixing of Vitrified floor tiles ( premimum Quality 600 x600 mm size)in floors, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with white cement including rubbing and cleaning complete including supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete but excluding GST asdirected by Engineer-in-charge .( New work)

For First Floor

Supplying fitting fixing of 6.5mm to 6.7mm thick ceramic wall tiles ( premimum Quality 200 x300 mm or 200 x200 mm size)as approved by EIC in floors, treads or steps and landing on 12mm thick bed of cement mortar 1:3(1cement: 3 sand) jointed with white cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.

For First Floor

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with supply of labour and material,T&P, scaffolding,taxes,tollages etc all complete but excluding GST as per direction of Engineer-in-charge.

One coat Priming with water bond cement primer to the newly plaster surface of the exterior Wall or over the exisitng putty surface of the interior wall of approved make & shade manufactured by reputed manufacturer or equivalent to make an even finished surface in all heights with all scaffolding and staging charges including supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc.all complete but excluding GST as per direction of Engineer-in-charge.

Finishing the wall surface by applying two coat Arcylic wall putty water base of approved quality on plaster surface area including cleaning, brushing, removing the flakes sand papering the same for smooth surface includingsupply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc.all complete but excluding GST as per direction of Engineer-in-charge.

For First Floor

Distempering two coats of approved quality and shade to New work including supplying cleaning, brushing, the old paint, removing the flakes and finishing smooth the wall surface by applying plaster of paris or wall putty where required, sand papering including supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc.all complete but excluding GST as per direction of Engineer-in-charge.

For Ground Floor

For First Floor

Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus, Fading, including scraping, cleaning, brushing, washing the old paint, with bio wash, removing the flakes applying uniformly two coats including supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc.all complete but excluding GST as per direction of Engineer-in-charge.

Painting two coats with approved quality & shade enamel paint on new iron work / old wood work k over one coat of red oxide primer including scraping, cleaning, the old paint surface sand papering, filling the holes with wax putty etc. all complete including supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc.all complete but excluding GST as per direction of Engineer-in-charge.

Painting and writing of figures and letters in different size upto 120 mm height with Supply of all labour, materials, T&P, taxes, etc. complete but excluding GST as directed by Engineer in charge.

Supplying, fitting & fixing of following PH materials of CERA/JAQUAR/Duravit or equivalent make with all accesories & U-PVC pipes of different dia. of medium quality as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST)

15mm UPVC Pipe (Supreme/Oriplast)

20mm UPVC Pipe(Supreme/Oriplast)

25mm UPVC Pipe(Supreme/Oriplast)

40mm UPVC Pipe(Supreme/Oriplast)

50mm UPVC Pipe(Supreme/Oriplast)

15mm Dia. U-PVC union

20mm Dia. U-PVC union

25mm Dia. U-PVC union

40mm Dia. U-PVC union

50mm Dia. U-PVC union

15mm Dia. U-PVC elbow

20mm Dia. U-PVC elbow

25mm Dia. U-PVC elbow

40mm Dia. U-PVC elbow

50mm Dia. U-PVC elbow

15mm Dia. U-PVC tee

20mm Dia. U-PVC tee

25mm Dia. U-PVC tee

15mm Dia. U-PVCsocket

20mm Dia. U-PVC socket

25mm Dia. U-PVC socket

40mm Dia. U-PVC socket

50mm Dia. U-PVC socket

15mm Dia. U-PVC MTA ( Brass Threaded)

20mm Dia. U-PVC MTA( Brass Threaded)

25mm Dia. U-PVC MTA( Brass Threaded)

40mm Dia. U-PVC MTA( Brass Threaded)

50mm Dia. U-PVC MTA( Brass Threaded)

15mm Dia. U-PVC FTA( Brass Threaded)

20mm Dia. U-PVC FTA( Brass Threaded)

25mm Dia. U-PVC FTA( Brass Threaded)

40mm Dia. U-PVC FTA( Brass Threaded)

50mm Dia. U-PVC FTA( Brass Threaded)

20mm PVC Ball Valve

25mm PVC Ball Valve

U-PVC Paste

Thread tape

110mm PVC Pipe

75mm PVC pipe

110mm PVC door bend

110mm PVC plain bend

110mm PVC P trap

110mm PVC NAHNI trap

110mm PVC Gully trap

50mm PVC floor trap

110mm PVC S/J with door

110mm PVC D/J with door

110mm PVC offset

75mm PVC door bend

75mm PVC plain bend

75mm PVC S/J with door

75mm PVC D/J with door

75mm PVC Cowl

110mm PVC Cowl

75mm PVC Clamp

110mm PVC Clamp

Commode EWC/AWC with cover with S-trap

10 ltr capacity PVC low level cistern

Health faucet

100mm dia shower

15mm dia C.P angular stopcock

CP waste coupling 32mm size half thread with 80mm height

20mm dia 60cm long towel rail

C.P Towel ring

CP glass self 600mm long

Soap Holder

5mm thick bevelleged plate glass mirror 24" x 18" size with masonite board and mirror screw.

125mm dia CP floor Grattings

Porcelain hand wash basin (parryware/Hindware/Hindustan)(16" x 22")

Standing Urinal ( 340x410x 265mm )

32mm PVC Waste pipe

15mm dia C.P Pillarcock (Plaza/Amber)

15mm long body C.P. Bib cock(Plaza)

15mm dia C.P bibcock(Amber/Plaza)

15mm dia C.P stopcock(Amber/Plaza)

20mm dia C.P stopcock(Amber/Plaza)

15mm PVC Ball Valve

40mm PVC Ball Valve

50mm PVC Ball Valve

15mm Connection pipe (PVC/CP)

2000ltr capacity PVC sintex tank pure white colour -3 core

Electrical Items

Wiring to light points as per scope of work.

Wiring to ceiling fan ponts as per scope of work.

Wiring to 5/6 Ampere socket points as per scope of work.

Wiring to 15/16 Ampere socket points as per scope of work.

Wiring to call bell points as per scope of work.

Wiring to light points at stair case with 2-way switch facility as per scope of work.

Wiring to exhaust fan points as per scope of work.

Wiring to roof top light point as per scope of work.

Wiring to Air conditioner points as per scope of work.

Wiring to 4 -way BDB points having 20A,SP,MCB as per scope of work.

Supply & installation of 1400mm sweep ceiling fan as per scope of work.

Supply & installation of 300mm exhaust fan as per scope of work.

Supply & installation of 450mm exhaust fan as per scope of work.

Supply & installation of Ding-dong call bell as per scope of work.

Supply & installation of 2' x2' , 36 watt surface mounted down LED light fittings with reflector, light and all required materials.

Supply & installation of 1' x1' , 24 watt surface mounted down LED light fittings with reflector, light and all required materials.

Supply & installation of 1' x1' , 15 watt surface mounted down LED light fittings with reflector, light and all required materials.

Supply & installation of 90 watt LED street light fittings as per scope of work.

Supply, Laying & testing of 4C x25 MMSq , 1.1 kv grade, aluminium armoured XLPE cable.

Making of Kutchha cable trench of size 900MM X 300MM & laying the said cable in the cable trench & refill the cable trench with excavated soil.

Execution of 20 feet chemical earthing system as per IE Rule with supply of all required materials.

Supply, installation, testing & commisioning of 63 A wall mounted indoor Panel having 63 A, 4 pole MCCB as Main incomme and 5 nos. 20A MCB, 1no. 32A MCB as out going feeder as per scope of work.

N.B: The electrical works are executed by the contractor as per direction of concerned Elecrical, Deptt. and the payments are released after certificate obtained from concerned Electical Deptt.

Manoj Kumar Nayak (BID ID -3188939)

Bijaya Kumar Jena (BID ID -3187575)