CO Water Guard Hut at Gyangara in GP Rarang Tehsil Moorang Distt Kinnaur

Amount

Cutting in earth work in all kinds of soil such as pick work, jumper work blasting hard or soft rock chiseling where blasting is prohibited and disposal of excavated earth within all leads and lifts.

Excavation in Foundations,in all kind of soil and rock , Trenches etc, in Earth Work, in all lifts stacking, the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm layers, when required into Plinths sides of Foundationsetc.consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth within all leads and lifts.as per the directions of Engineer in charge.

Providing and laying cement concrete 1:6:12 ( 1 cement : 6 sand : 12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-Charge.

Random rubble masonry/polygonal rubble masonry ncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nomina size) at plinth level in cement mortar 1:6 within all leads and lifts.as per the directions of Engineer in charge.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in Cement Mortar 1:6 within all leads and lifts.as per the directions of Engineer in charge.

Squared rubble masonry coursed with hard stone of approved quality in foundation Superstructure above plinth level and upto floor two level including raking out joints in Cement Mortar 1:6 within all leads and lifts.as per the directions of Engineer in charge.

Precast concrete hollow block masonry of 15 cm thick hollow of approved size inculding quion block ,jamps block closer made of concrete 1:3:6 ( one cement three sand six graded stone aggregates 40 mm nominal and down gauge in super structer above plinth level in cement mortar 1:6 ( 1 cement : 6 sand ) within all leads and lifts.as per the directions of Engineer in charge.

Providing wood work in frames of doors , window sand other frames wrought framed and fixed in position in second class Deodar wood within all leads and lifts.as per the directions of Engineer in charge.

Providing form work with steel plates 3.15 milimetre thick welding with angle iron in frame 30x30x5 milimetre, so as to give fair finish including centering, shuttering strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 metres and removal of the same for in-situ-reinforced concrete and plain concrete work in:- (i) Invertical Surface

Sides & soffits of beams,beam haunchings,cantilevers,girders,bressumers & lintels exceeding 1.00 mts.in depth inall heights from floor within all leads and lifts.as per the directions of Engineer in charge.

Flat Surface.

Providing and laying cement concrete work 1 : 2 :4 ( 1 cement : 2sand : 4 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landing & shelves and their support balconies,beams, girders, bressumers and cantilever upto floor two level within all leads and lifts as per the direction of Engineer-in-Charge.

In suspended floor,roofs,landing &shelves & their support balconies,beams,girders.bressumers & cantilever upto floor two level.

Providing steel mild /tore steel as reinforcement of RCC.including cutting ,wending.binding,and placing in postion within all leads and lifts.as per the directions of Engineer in charge.

20mm cement plaster in single coat on fair side of brick/ concrete/ stone walls for interior plastering up to floor two level including interal rounded angles, chamfars and /or rounded angles not exceedin 80 mm in girth and finished even and smooth on cement mortar (1:6) within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing 40 mm thick panelled glazed shutters for doors windows and clearstory window inculding black enamelled iron butt hings with necessary screw battened framed door shutters including bright finished or and black enamelled iron hings with necessary screws 2nd class deodar wood within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing wire guaged shutter using galvanised M.S. wire guage of IS wire guaged desigantions 85 G with wire of dia. 0.56 mm for door windows ,clestorey windows including bright finished or and black enamelled iron hings with necessary screws 2nd class deodar wood within all leads and lifts.as per the directions of Engineer in charge.

Pproviding and fixing oxdized aluminium sliding door bolts with nuts and screws etc. complete (250x16mm) within all leads and lifts as per the direction of Engineer-in -Charge.

Providing and fixing aluminium Tower bolts ( barrel type ) with nessary screws etc. complete (200x10mm) within all leads and lifts as per the direction of Engineer-in -Charge.

Providing and fixing aluminium handles with nessary screws etc. complete 125M,100mm within all leads and lifts as per the direction of Engineer-in -Charge.

P/F flat iron hold fast 40cm long within all leads and lifts.as per the directions of Engineer in charge.

Stone soling properly hand pack under floors within all leads and lifts.as per the directions of Engineer in charge.

Prov. & laying vitrified tiles 10 mm thick in flooring (600 x 600x10mm size) treads of steps laid on a bed of 12 mm thick cement mortor 1:3 (1cement:3 sand) finished with pointing in white cement within all leads and lifts.as per the directions of Engineer in charge.

White glazed tiles 6mm in flooring ,tread ,steps & landing laid on a bed 12 mm thick cement mortor (1:3) finished with flushed pointing in white cement within all leads and lifts.as per the directions of Engineer in charge.

White glazed tiles 6mm in flooring ,tread ,steps & landing laid on a bed 12 mm thick cement mortor (1:3) finished with flushed pointing in white cement within all leads and lifts.as per the directions of Engineer in charge.

White washing with line on undecorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove dirt and dust etc within all leads and lifts.as per the directions of Engineer in charge.

Distempering (Two Coats) with oil bound washable distemper of approved brand and manufacture and required shade on undecorated wall surface to give an even shade over and including a primary coat with distemper primer of approved bland and manufacture alter thoroughly brushing the surface free from motor dropping and other foreign matter priming coat with distemper within all leads and lifts.as per the directions of Engineer in charge.

Providing corrugated gi sheet roofing fixed with galvanised iron j or l hooks,bolts & nuts 8 mm f with bitumen & gi limpet washers filled with white lead copmplete excluding the cost of purlins,rafters & trusses. with 0.63 mm thick sheet) within all leads and lifts.as per the directions of Engineer in charge.

Providing ridges or hips 60 cm.over all in plain with galvanised iron gi sheet fixed j or l hooks,bolts & nuts 8 mm f gi limpet & bitumens washers complete. (0.63 mm thick gi sheet) within all leads and lifts.as per the directions of Engineer in charge.

Steel work welded in built up section,trusses & frames work i/c cutting hoisting,fixing in position & applying a priming coat of red lead paint :- in grating, framed guard, bars, ladders, railng,bars, bracket & similar work within all leads and lifts.as per the directions of Engineer in charge.

P/f of Absestos plain Cement sheet ceiling of approved quality with but jointing (frame work & fillets to be measured & Paid for seperately) 6mm thick within all leads and lifts.as per the directions of Engineer in charge.

Steel work welded in built up section,trusses & frames work i/c cutting hoisting,fixing in position & applying a priming coat of red lead paint :- in m.s. flats 1.588 mm thick within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing M.S. Grills of required pattern in wooden frams windows etc with M.S. flat, Square or Rounded bars with rounded headed bolts nuts or by Screw's within all leads and lifts.as per the directions of Engineer in charge.

P/F 12 mm thick and 100 mm wide pelmet with 25 mm dia. Wooden curtain rods & brackets including fixing with 25 x 3 mm MS flat 10 cms long & plug etc. complete with Ist Class Deodar wood within all leads and lifts.as per the directions of Engineer in charge.

Applying priming coat over new wood and wood based surfaces after and including preoaring the surface by througly cleaning oil, grease, dirt and other foreign matter and papering and knotting ready mixed paint brushing wood primer pink within all leads and lifts as per the direction of Engineer -in- Charge.

Painting two coats( excluding priming coat) over new wood and wood based surfaces with enamelled paint to give an even shade including clearing the surface of all dirt,dust(a) with whit enamel paint within all leads and lifts as per the direction of Engineer -in- Charge.

Providing plinth protection 50 mm thick in c.conc.1:3:6 (1cement: 3sand: 6 graded stone aggregate 20 mm nominal size) & curing complete within all leads and lifts.as per the directions of Engineer in charge.

Constructing Course rubble hammer dressed 'U' shape surface drain with side wall 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design within all leads and lifts.as per the directions of Engineer in charge.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in Cement Mortar 1:4 within all leads and lifts.as per the directions of Engineer in charge.

20mm cement plaster in single coat on rough side of brick/ concrete/ stone walls for interior plastering up to floor two level including interal rounded angles, chamfars and /or rounded angles not exceedin 80 mm in girth and finished even and smooth on cement mortar (1:6) within all leads and lifts.as per the directions of Engineer in charge.

Providing and laying cement concrete 1:5:10 (1 cement: 5 sand: 10 graded stone aggregate 20mm nominal size) with 15% plum and curing complete excluding cost of form work in retaining walls/Breast walls, the size of plums shall usually be 150mm. To 300mm as per H.P.P..D. specification within all leads and lifts.as per the directions of Engineer in charge.

Fixing of MS Gate 2 mts wide within all leads and lifts.as per the directions of Engineer in charge.

Manufacturing,Providing and fixing of GI Pipe 40 mm dia. Angle iron 30x30x3mm, MS flat 40mm width , 3mm thick and square bars ISSQ-5 width 5mm around the complex within all leads and lifts.as per the directions of Engineer in charge.

Applying priming coat over new steel and other metal suface after and including preparing the surface by througly cleaning oil, grease, dirt and other foreign matter and papering and knotting ready mixed paint brushin within all leads and lifts as per the direction of Engineer- in -Charge.

Painting two coats( excluding priming coat) over new steel and other matal surface with enamelled paint to given and even shade shade including clearing the surfce of all dirt, sust(a) with whienamel paint within all leads and lifts as per the direction of Engineer-in-Charge.

Providing & laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring & shuttering in Foundation & plinth within all leads and lifts.as per the directions of Engineer in charge.

Providing & laying cement concrete1:2:4 (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size) & curing complete excluding the cost of form work & reinforcem- ent for RC work within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing iron floor steps on 16 mm dia bar within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing PVC spigot and socked soil waste and vantilating pipe (lead caulked joint to be measured and paid separately) (Make finolex/jindal etc.) within all leads and lifts.as per the directions of Engineer in charge.

100 mm nominal bore

75mm nominal dia

Providing and fixing branch with collar in all leads and lifts. (Make Finolex/Jindal) within all leads and lifts.as per the directions of Engineer in charge.

100 mm nominal bore

75mm nominal bore

Providing and fixing CI Man Hole cover and frame conferming to IS 12593-Part-I 1888 and IS 12592 -Part-II 1991 500 mm diameter (Medium Duty) within all leads and lifts.as per the directions of Engineer in charge.

Providing and laying PPR Class-20 tube fiting in trenches (Earth work to be measured and paid for separately within all leads and lifts.as per the directions of Engineer in charge.

20 mm nominal bore

Providing and fixing wall ceiling and floor PPR Class -20 tube fiting and chamber including making good the wall ceiling and floor within all leads and lifts.as per the directions of Engineer in charge.

15 mm nominal bore

20 mm nominal bore

Providing PVC water storage tank of approved quality including fitting complete in all respect 2000 Liters in all leads and lift Sintax make within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing PVC clamp PVC pipes (Make Finolex/Jindal) within all leads and lifts.as per the directions of Engineer in charge.

75 mm nominal bore

100 mm nominal bore

Providing and fixing PVC fittings aceessories bends of required degree any radius with access door insulator rubber washer 3mm thick bolt and nuts complete in all leads and lifts. (Make Finelex/Jindal) within all leads and lifts.as per the directions of Engineer in charge.

75 mm nominal bore

100 mm nominal bore

Providing and fixing PVC Cowl (Make Finolex/Jindal) within all leads and lifts.as per the directions of Engineer in charge.

75 mm nominal bore

100 mm nominal bore

Providing and fixing PVC floor trap of self cleaning design with PVC screws down or hinges grating with or without vent arm complete i/e cost of cutting and making goods the wells and floors. (Make Finolex/Jindel) within all leads and lifts.as per the directions of Engineer in charge.

100 mm nominal bore

Providing and fixing WC English Type with integral P or S trape including jointing the trap with soil pipe in cement mortar 1:1 (1 cemtnt:1 sand) seat and cover will be measured and paid separately (Make Hindware/Cera etc.) within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing plastic seat (Solid/Hollow Type) and Vover for wash down water closet with C.P. brass hinges rubber buffer-Solid type white plastic seat and cover within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing 10.0 liters viterious china low level flushing cistern with a pair of CI mild steel bracket complete with fitting such as lead valve less syphon 15 mm nominal size brass ball valve with polythene float C.P. brass handle Union and coupling for connection with inlet outlet and over flow pipes 40 mm dia C.P. flush bend including cutting hole in wall and making good the same and connection the flush bend with cistern and closet(over flow) pipe to be measured and paid separately Cera sanitary wall (cornet) Cistern conca. (Make Hindustan/etc.) within all leads and lifts.as per the directions of Engineer in charge.

White

Providing and fixing viterious chna wash basin with single hole for piller trap with CI or MS bracket painted white including cutting holes including good the excluding fitting/Sera sanitory work (Make Hindware/Cera etc.) within all leads and lifts.as per the directions of Engineer in charge.

White 630x440 mm

P/F 32 mm dia C.I waste pipe for wash basin sink i/c brass check unit within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing brass towel rail complete with CP brass bracket fixed to wooden plug with CP brass screws (Make ESSESS/Cera etc.) within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing brass towel ring complete with CP brass bracket fixed to wooden plug with CP brass screws (Make ESSSS/Cera etc.)within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing 600x450 mm bevelled edge mirror of superior glass marked on 6mm thick AC sheet of ply wood sheet and fixed to wooden plug with CP brass screw and washer within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing toilet paper holder CP brass (Make ESSESS/Cera/Hindustan etc. within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing CP brass soap plate dish with CP brass bracket fixed to wooden cleates with CP brass screws chrome plate. (Make ESSESS/Cera/Hindustan within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing Central hole basin mixer without pop up waste system with 450 mm long flexible hose (Make ESSESS/Cera/Hindustan)within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing Concealed stop cock 15 mm (Make ESSESS/Cera/Hindustan) within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing wall shower with provision for over head shower with 190 mm long bebd pipe and wall flange (Make ESSESS/Cera/Hindustan within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing angular stop cock with wall flange (Make ESSESS/Cera/Hindustan) within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing Rain Fall bath shower 18" long arm (Round) (Make ESSESS/Cera/ Hindustan) within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing Toilet Jet Cleaning within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing PVC Connection from Gyser 15 mm dia. within all leads and lifts.as per the directions of Engineer in charge.

Providing and fixing kitchen sink of stainless steel of 600x450x150 mm within all leads and lifts.as per the directions of Engineer in charge.

LAKPA LAMA

DHAME SHERPA CONTRCATOR