ADDITION ALTERATION OF TCTA HALL OF MO CDA PATNA FOR CONSTRUCTION OF TWO VIP SUITES UNDER GE DANAPUR

Amount

S& F Light wt / steel structure (LGSFS) in designing, providing, installing and fixing factory finished custom designed cold from steel framed super structure comprising of steel wall panel, trusses, purlins etc. manufactured out of Minimum 0.75 mm thick steel as paer desgin requirements. the steel shall be galvanized (AZ-150 GSM or GI of 275 GSM having yield strenght 300-550 Mpa ) conforming to AISI specifications and IBC 2009 for cold framed steel framnig and construction and also as per IS 875-1987 (part-I, Dead Load ,Part-II,Imposed load, part -III, Wind load , Part-IV,Snow load, and Part-v,special load & load combinations), IS 800-1975 (Code of Practice for use of cold formed steel structural Members in G eneral Building Construction ).The wind load shall be as per provisions of IS 875 (Part-III).LGSFS Frame shall be designed as per IS; 801 using commercially available software such as STAAD PRO -v8i/Achitek2.5.16/Revit architecture2011or equivalent. The framinig section shall be cold from c-type having minimum web depth 89mm x 41mm flange x 11mm lip in reqired length as per structural desgin requirement duly punched with dimple/slot at required locations as per approved drawings.The slots will be along center line of webs and shall be spaced minimum 250mm away from both ends of the member.the frame can be supplied in panelized of knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads.All self-drilling tapping screws for joining the members shall have a type II coating in accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm.the frames shall be fixed to RCC slab or Tie beam over EPDM rubber using self-expanding carbon steel anchor bolt of dia as per approved drawings, design subject to minimum 12mm diameter and 121mm length conformining to AISI 304 and 316 at 500mm/cc with minimum embedment of 100mm in RCC and located not more than 300mm from corners or tremination of bottm tracks completed in all respects.Hot rolled steel sections as per design & conforming to IS 800 can be used along with CFS as per desgin and complete as shown in drawings as mentioned in Particular Specification. Make : Nipani Iinfra & Industries Pvt Ltd.

(a) Proper usage of connection Accessories like Heavy duty tension Ties,Light duty Hold-ones, Twist Straps (to connect truss with wall frames),Strong Tie, Tie Rod,H-Brackets,Boxing section, L- Shaped Angles shall be ensured for required structura lintegrity & stability.

(b) External Cladding will consist of 9mm HD board with builiding wrap sandwiched between Structure frame & Cladding.Internal cladding will consist of 12.5mm gypsum over 8mm Normal type B Board.

(c) for structure, the roof will be PPGL Sheet underlay rock wool.Wall insulation:The framed structure will be filled with 50mm thick rock wool slabs of Density 48kg/m3

(d) providing and fixing EISF finishing system on external face of building consisting of Expanded polystyrene (EPS) 25mm thick fixed to FCB both mechanically and with adhesive. Base coat with modified polymer based synthetic cement compound reinforced with synthetic fiber mesh. top coat stuccos applied in two coats.the scratch and brown coats applied with Acrylic finishes to provide protection and beautify to the finishshed Wall System.Including Normal Conceal fitting included . NOTE:- Flooring (Wall & floor tile),Door & windows, Sanitary fittings,Plumbing sewage line and electrical fitting.Fibre ceiling excluded in this item & will be measured & paid separately.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 sqm and not exceeding 0.11 sqm in floors etc with and including over 15mm thick screed bed in CM 1:6 set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified & directed.

M&L for glazed/digital coloured ceramic tiles 450 x 300 x 7/450x350x7mm thick as in vertical surfaces such as dado / skirting etc. over and including 10 mm thick plaster in cement mortar 1 : 4 as a backing coat for fixing of wall tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade etc. complete all as specified and directed.

M&L PCC 1:2:4 type B1 (20mm graded stone aggregate) , 25 mm thick as in sub top layer of floor and finished rough to receive the floor tiles.

M & L for Light coloured vitrified ceramic tiles 10 mm thick (square /rectangular) polished, size of tile 600x600x10mm thick ,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15 mm thick in cement mortar 1:6. complete all as specified and as directed by the Engineer-in-Charge.

M & L for Light coloured vitrified ceramic tiles 10 mm thick (square /rectangular) polished, size of tile 600x600x10mm thick ,in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Fixed with adhesive complete all as specified and directed.

Supply only adhesive for wall tiles. complete all as specified and directed.

M&L for vitrified heavy duty (dura stone) tiles 300x300x9 to 10 mm thick in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F Gl frame work powder coated for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and size of grid 605mm x 605mm complete for false ceiling all as specified and directed by Engr-in-Charge

M & L for 6 mm thick Non asbestos fibre cement building boards fixed or laid / inserted to timber / GI / Aluminium framework with screws complete all as specified and directed. Make- Armstrong, Hunterdouglas etc

S & F for hangers 6 mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40X30 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed

Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S & F Vitreous china wash down water closet pan (pedestal pattern ) floor mounted cascade type of size 380 x660x765mm Bowl for coupled WC with UF soft close slim seat cover, and fixing of flushing cistern, brackets, flushing pipe etc, s, complete all as specified and directed (Make : Jaquar cat part no CNS-WHT-851P180SPP or Equivalent in Prayag)

S&F vitreous cabinet china wash hand basin, flat back with cabinet one No pvc waste pipe 25mm dia and 75 cm long with 32 mm dia connector, 32 mm size waste fitting, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed and pvc connection 15 mm dia & 600mm long with two Nos check nut washer complete including cutting for and pinning in ends of bracket or erecting stand completed all as apecifed and directed.

S&F CP two way angle stop cock 15 mm with wall flange complete all as specified and directed. Make : Jaquar CQT-23059 or equivalent in Jaguar

S&F Wall mixer with provision for overhead shower with 115 mm long bend pipe on upper side connecting legs & wall flanges. complete all as specified and as directed. Make : Jaquar FUS - 29273UPR or equivalent Prayag Polymer Pvt Ltd.

S&F overhead shower 150x150mm squarel shape single flow (ABS body chrome plated with grey face plate) with rubit cleaning system complete all as specified and as directed.

S&F brass chromium plated tubular towel rack with lower hanger (stainless steel) with hook complete all as specified and as directed.Make : Jaquar CHR - 1581H or equivalent Prayag Polymer Pvt Ltd.

S&F CP towel ring round with round flange & iron CP brass screw and wooden/plastic cleats complete all as specified and as directed. Make : Jaquar CAN-1121BN or equivalent Prayag Polymer Pvt Ltd.

S&F glass shelf 600mm long including fixed with CP brass screw and wood cleats / rowel plug with wall complete all as specified and as directed. Make : Jaquar CAN-1171N or equivalent in Prayag polymer Pvt Ltd

S&F 15 mm bore concealed type stop valves, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pie with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F toilet paper holder with flap recessed type stainless steel complete all as specified and as directed.

S&F in repairs PVC connection 15mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed.

S&F 100 mm dia grating doom of stainless steel complete all as specified and as directed.

S&F Corner glass shelf 300mm (with brass brackets) including fixing arrangements complete. Make-Prayag or equivalent (Cat No BEA-44) or equivalent Prayag Polymer Pvt Ltd.

S&F PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed.

S&F 100 mm dia grating doom of stainless steel complete all as specified and as directed.

S&F 75 mm dia of PVC (SWR) multi floor trap plain including jointing with solvent cement of outlet complete all as specified and directed.

S&F 75 mm dia of PVC floor trap plain including jointing with solvent cement of outlet complete all as specified and directed.

S & F PVC (SWR) bends any radius of 110 mm dia complete all as specified and directed.

S & F PVC (SWR) bends any radius of 75 mm dia complete all as specified and directed.

S& F PVC(SWR) jnctions single(SingleT) equal or unequal, dia of bore 110 mm complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) 'P' trap for 110 mm dia etc complete all as specifiedand directed..

Supply & laying of CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete.

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete.

Note for item No 37 & 38(i) CPVC fittings with brass threading will be included in item No 37 & 38 of BOQ (ii) Cost of normal SDR CPVC fittings Like Bend, Tee, Elbow, Union etc shall inclusive under the quoted rate of pipe including.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity including CP tank nipple complete all as specified and directed.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.

M&L for point wiring using approval colour coding as per IS, with multistranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit to white. ivory colour including all accessories. heavy duty ISI marked after chasing in wall/ceiling etc, with GI sunken boxes 1.2mm thick, 60 mm deep with earth doll duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductro 1.5 sqmm (nominal area) single core FRLSH cable as earth continuity conductor tocommon earth and connecting toearth dolly complete all as specified and directed for the following:-

All as per item no 43 above but one bell point controlled by one bell Push

All as per item no 43 above but one three pin socketoutlet 5 Amps on same board complete

All as per item no 43 above but one 5 Amps socket out let point on independent board controlled by one switch.

All as per item no 43 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.

All as per item No 43 above but wiring with 4.0 sqmm single core copper conductor for one socket out let 15.16 amps insulated unsheathed copper conductor as a earth wire complete all as specified and as directed. Make of cable Polycab/Havell's/Finolex and Make of PVC conduit Plaza/Harsh/Kalinga Premium/AKG.

S&F 6 Amps one way single pole switch modular type one module complete all as specified and as directed.

S & F socket outlet 2/3 pin combined 6A modular type two module complete all as specified and as directed.

S & F switch socket combination 6/16 Amps 6 pin modular E type 3 module complete all as specified and as directed

S & F bell push for calling bell 5 amps modular type complete all as specified and as directed

S & F bell multi music type complete all as specified and as directed

S & F modular metal box 2 way with necessary fittings complete all as specified and as directed

S & F modular metal box 3 way with necessary fittings complete all as specified and as directed

S & F modular metal box 4 way with necessary fittings complete all as specified and as directed

S & F modular metal box 6 way with necessary fittings complete all as specified and as directed

S & F modular metal box 8 way with necessary fittings complete all as specified and as directed

S & F modular white cover plate with frame 2 way with necessary fittings complete all as specified and as directed.

S & F modular white cover plate with frame 3 way with necessary fittings complete all as specified and as directed.

S & F modular white cover plate with frame 4 way with necessary fittings complete all as specified and as directed.

S & F modular white cover plate with frame 6 way with necessary fittings complete all as specified and as directed.

S & F modular white cover plate with frame 8 way with necessary fittings complete all as specified and as directed.

S & F blank plate PVC in liew of MCB, piano switch, Socket etc complete all as specified and as directed.

Supply and fix Ceiling rose surface bakelite 63.5mm dia three terminal, fixied in repairs complete.

Supply and fixing double door TPN DBs four way, 415 V of powder coated DB's suitable for MCB's fitted with bus bar Neutral link Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed

Supply and fix double door SPN DBs 12 way, 240 volt with E 200 Amp rated bus bar SPN of powder coated DB's suitable for housing MCB's/Isolater, Neutral link, Earth bar and Din ral complete.

Supply and fixing MCCB adjustable thermal magnetic release type, 4 poles, 415 Volts, Icu= 100% Ics, 36 KA breaking capacity of rating 160 Amps including all fixing accessories with both ends spreader links and disconnecting and taking out old U/S MCCB complete all as directed. Make - L&T/Simence / Legrand

Supply and fixing MCB TPN 63 amps 10 KAC-series, 415 V including connection with suitable size aluminium / copper lugs complete all as specified and directed

Supply and fixing MCB TPN 32-40 amps 10 KA, C-series, 415 V including connection with suitable size aluminium / copper lugs complete all as specified and directed

S&F in MCB SPN 240 volts 32 Amps. 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete. Make-HPL / Indo Asian / ABB

S&F in MCB SP 240 volts 5-32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium/copper lugs complete. Make-HPL / Indo Asian / ABB

M&L for Sub main wiring PVC insulated unsheathed cable 1100 volts grade, 4X6 Sqmm size with multistranded copper conductor, drawn in but including non metallic rigid PVC conduit including PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete Note: four run 6.0 sqmm wire for 3 phase and neutral with colour code as per IE rules and one run green colour 6.0 sqmm wire and PVC conduit pipe shall be measured in one unit.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in but including non metallic rigid PVC conduit including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete. Note: Two run 4.0sqmm wire for phase and neutral with colour code as per IE rules and one run green colour 4.0 sqmm wire & PVC conduit shall be measured as in one unit.

M&L for Sub main wining two single core PVC insulated unsheathed cable 1100 volts grade, 2.5 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete Note: Two run 2.5 sqmm wire for phase and neutral with colour code as per IE rules and one run green colour 2.5 sqmm wire and PVC conduit pipe shall be measured & paid as one unit.

Supply and fixing LED lights fitting 1x 20W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing batten / angular fittings complete all as specified and directed

Supply and fixing LED bulb 9 watt complete all as specified as specified and directed.

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 A capacity complete all as specified and as directed

Supply, fixing and testing of ceiling fan 1200 mm sweep. heavy duty, single phase, AC, 230 Volts, 50Hz, BEE 5 star rating, ISI marked complete with down rod, canopy, blades, BLDC motor without remote, electronics fan regulator etc complete connection from ceiling rose to fan including writing of MES Number with synthetic enamel paint complete all as specified and as directed.

Supply and fixing wall fan of single phase 230/240V of size 400 mm sweep and grouting with nut bolts & Fastener on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable complete all as specified and directed Make: Havells, Model: Sameera or equivalent model of Bajaj/CG/Philips.

Supply and fixing exhaust fan made of sturdy Steel metal body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm and grouting with nut bolts & Fastenar on the wall by cutting and rounding wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable complete all as specified and directed.

Supply, laying, jointing & testing in trenches or passing through wall/ceiling, 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 25 sqmm 3.5 core with all fixing & connecting accessories such as Alluminium cable lugs, cable gland nut, bolts, washer, saddle, etc complete as specified and as directed. (Make: HAVELLS/POLYCAB/MESCAB)

Supply, fixing & laying GI tubing light grade 25 mm bore with one socket both end threaded in any length including cutting threading connectin in new or old positioni and all type of GI new fittings for laid in trenches/wall/ceiling/floor all as specified and directed.

S&F Gun metal globe or gate valves of 25 mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including Gl earth lead of Gl strip 32X6mm size by means of steel bolts nuts check nuts and washers test points made of Gl strip 40X8mm, 10 cm long PCC 124 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 124 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade Gl watering pipe 20mm bore with funnel, wire mess and light grade Gl protection pipe 40mm bore upto 5m lenght for drawing in earth lead salt charcol etc. including excavation and earth work in any type of soil removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No 3 of MES schedule 2009 part-1 and connected

RC GUPTA AND SONS (BID ID -3166556)

M/S SHEO KUMAR SINGH AND SONS (BID ID -3161421)