Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.1 LAccepted-AOC 63 BAJMASTA RAMBAN | RAMBAN | RAMBAN | JAMMU AND KASHMIR | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹46.8 L+₹1.7 L (3.71%)Rejected-Finance | L2 | Rejected-Finance Other than lowest |
Tender Value
₹42.5 L
EMD Value
₹85,000
Closing Date
16 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(I) 873 EWS
Garrison Engineer (Indep) 873 Engineer Works Section PIN 913 873 C/O 56 APO
REPAIR TO PCC HARDSTANDING WITH DIMENSION 50X25M FOR HELIPAD AND PROVN OF GUARD ROOM SHELTER WITH TOILET AND BATH ROOMAT DUL MIL STN UNDER GE (I) 873 EWS
2022_MES_567654_1
NIT-71 of 22-23
Open Tender
Civil Works
Item Rate
290 days
Bhaderwah
As per NIT
7 documents required · 7 mandatory
₹500
GE(I) 873 EWS
₹85,000
Yes
6 Feb 2023
6 Dec 2022
19 Jan 2023
6 Dec 2022
16 Jan 2023
26 Dec 2022
Amount
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.
Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.
Rough excavation not exc. 1.5m deep and getting out in any type soil complete all as specified and directed.
Excavation over areas n. exc. 1.5m deep in any type of soil and getting out, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.
Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Broken stone or boulders filling dry, Hand packing of gauge 80 to 150 mm as in back of walls and raising (or lowering) to the required level complete all as specified.
Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any type of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed.
Hard core of broken stone gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.
Plain Cement concrete 1:5:10, type E-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
Plain Cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
Plain cement concrete 1:3:6, nominal mix, type C1, using 20mm graded crushed stone aggregate as in surface channel and drains, complete all as specified.
Plain Cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
RCC 1:2:4 type B-1 (Nominal mix) using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.
Providing precast cement concrete 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) as in anchorage blocks, bonders (for stone walling) including chamfers, weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match complete all as specified.
PCC 1:2:4 type B-1 (Nominal mix), using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.
Formwork to sides of concrete foundation, footings, bases of columns, rafts and raft beams and similar work; vertical or to batter for rough finished surfaces of concrete, complete all as specified and directed.
Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed.
Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:4 in half brick wall, complete all as specified.
Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6, brought upto courses, complete all as specified and directed. Note : Volume of PCC bond stone shall be deducted from total cumulative quantity of stone masonry.
TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.
All as per Srl item No. 21 here-in-before but 5mm dia & over upto & including 10mm dia in stirrups, spacers and binders complete all as specified & directed.
Mild steel rolled work as in roof trusses (framed), purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, square / rectangle sections, channel or flat section) including distance pieces, cleats etc. Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed.
Mild steel screw bolts (Machine made) with hexagonal or square heads at one ends and screwed the other ends, or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut exc 10cm long, diameter of shank 11-15mm, complete all as specified & directed.
Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.
Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.
Supply only chain link fencing of 3.15mm dia galvanised steel wire, conforming to IS : 2721 -2003 including line wires, straining bolts, binding wire etc., complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire, complete all as specified and directed.
Galvanised, 2 strand steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing and tying at crossings with and provision of galvanized mild steel wire, staple or steel pins, etc complete all as specified and directed
Mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Framed work such as grills, grating etc with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barrel, iron doors, ladders, balusters, walkway, frame work of water tanks and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.
Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified.
Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) all as directed.
Pressed steel frames of size 125mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, PCC 1:3:6 type C-0 for filling of hollow portion, complete all as specified
30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified
35mm thick, 2nd class Hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, size of members of shutters as specified in clause 8.24 (b) of SSR Part-I, fitted to chowkat, complete all as specified.
Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 100mm long, complete all as specified.
Extruded aluminium alloy handle, fabricated type, anodised, 150mm long (ISI marked), complete all as specified.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified.
Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, 300mm long, all as specified.
Mild steel, barrel tower bolt, stove enamelled black with bright bolt and fixed, 200mm long (ISI marked), complete all as specified.
Mild steel, pressed handle, oval type, stove enamelled black and fixed, 150mm long (ISI marked), complete all as specified.
Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.
Steel windows with side hung shutters including projecting type hinges with steel handle 100mm long, made of Z section and steel peg stay, complete with glazing bars, dovetailed or welded and two numbers MS tower bolt of 100 mm long, complete all as specified & directed.
Steel ventilators with top hung shutter including hinges, steel peg and stay and two numbers MS tower bolt of 75 mm long complete all as specified and directed.
Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire, staples all as specified and directed.
4 mm thick non asbestos fiber cement plain building boards in false ceiling on and incl aluminium snap grid work 605 x 605 mm with using 36.5mm x 23.5 mm x 1.5 mm thick main tee, 23.5 x 23.5mm x 1.28 mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall including necessary supporting hanger with 3 mm dia GI wire and J bolts washer nuts for securing frame work to ceiling suspended @ 120 cm c/c both ways, complete all as specified and directed.
3mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. all as directed.
PCC 1:1 1/2:3, nominal mix, type A1, using 20mm graded crushed stone aggregate as in floor, hardstanding / paving, finished the surfaces even and smooth without using extra cement including use and waste of form work to divide the area into panels complete all as specified and directed.
PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) in floor, hardstanding / paving, finished the surfaces even and smooth without using extra cement including use and waste of form work to divide the area into panels complete all as specified and directed.
Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified & directed.
100mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring finished even and rough, to receive floor finishes, complete all as specified and as directed.
Non-sked ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.6 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick bedding layer in cement mortar 1:4, complete all as specified.
Non-sked ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick bedding layer in cement mortar 1:4, complete all as specified.
Glazed ceramic tiles, coloured of size 350x250x7mm / 450x350x7mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement, laid over and including 10mm thick plastering in cement mortar 1:3, complete all as specified
Factory made (rectified) precast concrete designer chequered tiles any colour, shape and size not less then 200mm x 200mm x 25mm thickness (compressive strength not less than 250 Kg/Sqm), pointed with grey cement and pigment over and including 20mm thick CM 1:4 screed bed or bedding layercomplete all as specified and directed.
75 mm thick plain cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in plinth protection, and laid in panels complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed.
Rendering 15mm thick in cement mortar 1:4 on other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.
15mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement but using integral water proofing compound as per manufacturer,s instructions, complete all as specified. Note : Integral water proofing compound shall be measured & paid seprately.
Supply only integral water proofing compound, complete all as specifed.
Rendering 15mm thick in cement mortar 1:6 on other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.
Raised pointing to random rubble masonary, or polygonal rubble, uncoarsed or brought upto courses in cement mortar 1:4, complete all as specified and directed.
Bib taps, 15mm bore of cast copper alloy chromium plated (ISI marked) fancy type, screwed down, high presure, screwed both ends for iron pipe or for brass ferrule, complete all as specified and directed.
Stop valve of cast copper alloy chromium plated (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified and directed.
Pillar tap cast copper alloy with capstan head, fancy type, chromium plated (ISI marked), screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed shank and fly nuts screwed for iron pipe complete for 15mm bore pipe, complete all as specified and direct
PVC connection 15mm size with length 600mm with PTMT nuts, complete all as specified and directed.
Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed in repair, complete all as specified.
Grating doom 100mm size of PTMT (minimum weight 25 gms), complete all as specified
Soap dish vitreous china white, any size fixed to plugs with brass chromium plated screws and wooden/plastic cleats, complete all as specified.
Towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified.
15mm dia GI steel water tubing, medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.
20mm dia GI steel water tubing, medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.
Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) incl provision of cement concrte bedding, CI 'P' trap 100mm dia, connection to trap and fushing pipe, anti-syphonage complete all as specified and directed.
Vitreous China, wash hand basin, flat back white of size 550mmx400mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, exclusive of waste pipe, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets , complete all as specified.
Vitreous china urinal flat back of size 465x355x265mm white complete with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified.
PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed.
PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors/weep hole, complete all as specified & directed.
PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement complete all as specified.
110mm bore PVC (SWR) bends any radius, complete all as specified.
75mm bore PVC (SWR) bends any radius, complete all as specified.
20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.
Decorative curtain rod made of MS pipe covered with coloured PVC layer dia of rod 25mm with and including decorated finle complete all as specified and directed.
Rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 1000 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and PTMT ball valve 20mm (Minimum weight 210 gms), high pressure with polyethelyne float and fly nuts complete all as specified and directed.
Prepration of new plastered surfaces of wall and applying two coats of oil bound distemper including one coat of alkali-resistant primimg paint complete all as specified and directed.
Preparation new plastered surfaces of walls and applying two coats of cement base paint including one coat of alkali-resistant primimg paint complete all as specified and directed.
Preparation of new concrete surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of primer, complete all as specified.
Preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified.
Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.
Construction of septic tank 10 Users (Brick masonry construction), complete all as specified and as shown on drawing No CEUZ/TD/1202/03 Sheet 1/2 dt 14.10.14 and 2/2 dt 11.05.07.
Construction of soakage well 1.80m dia and 3m depth (Internal dimensions) (Brick masonry construction), complete all as specified and as shown on drawing No CEUZ/TD/1202/03 Sheet 1/2 dt 14.10.14 and 2/2 dt 11.05.07.
Precast cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), door sill lintels and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:6) including necessary form work complete all as specified and directed.
Concrete bed to 150mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid in cement concret 1:3:6 (Nominal mix) type C-2 using 40mm graded stone aggregate, and tested, complete all as specified & directed.
Salt-glazed stoneware drain pipe, internal dia of pipe 150mm, laid in trenches and jointed and tested, complete all as specified including taking down old unservicable pipes.
Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) un-reinforced and disposal of unserviceable materials, debris and rubbish to a distance 200m or under including loading, unloading and stacking, complete all as specified & directed.
Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including concealed PVC conduit of wall thickness not less than 1.8mm and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or fan point or bell point controlled by one No, one way switch/one bell/buzzer point using cable of different insulation colour for colour coding including modular white cover plate with frame for mounting modular switches, sockets, fan regulator etc including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and directed.
All as per the description of Serial Item No 98 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and directed.
All as per the description of Serial Item No 98 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and directed.
All as per the description of Serial Item No 98 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.50 Sqm with 2.50 Sqmm copper conductor in green colour for as earth continuity conductor all as specified and directed.
Switch piano, flush type, 5/6 Amps, single pole, one way complete all as specified and directed.
Socket out let 3 pin 5/6 Amp, piano flush type, 240 volts complete all as specified and directed.
Switch socket out let combination universal type, 2 in 1, 2 and 3 pin 5 Amp, piano flush type, 240 volts complete all as specified and directed.
Switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts complete all as specified and directed.
LED light fitting 1x20 watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up cable of copper conductor size 3-core ,23/0.0076 from ceiling rose to light fitting connector complete all as specified and directed. Make :- HAVELL's Cat No LHEXARP7SN1W020 or equivalent in Crompton /Philips
LED recess mounting 2' x 2' size, low glare luminaries 25 watt with decorative performance, suitable for metalic false ceiling type Armstrong / US gypsum or similar ceiling, including LED light and making connection from ceiling rose to fitting with PVC insulated sheathed flexible copper conductor cable of size 0.75 Sqmm complete all as specified and as directed. Make : Havells Cat part no. VENUSNE02x2PLR34WLED865ST or equivelant make Philips//Bajaj/Crompton
Ceiling rose surface bakelite three terminals 240 volts complete all as specified and directed.
Sheet metal enclosure factory made single door for DB 240 volts with 200 Amps rated bus bar SPN 2 Way complete all as specified and directed.
Sheet metal enclosure factory made single door for DB 240 volts with 200 Amps rated bus bar SPN 8 Way complete all as specified and directed.
MCB SPN 40 to 63Amp 10 KA 240 Volts, 'C' Series, complete all as specified and directed.
MCB SP 5 to 32Amp 10 KA 240 Volts, 'C' Series, complete all as specified and directed.
1100 Volt grade heavy duty cable PVC Insulated aluminium conductor, served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hanger not more than 1 mtr apart including 4 mm suspension wire, one twin core cable flat or circular 16 sqmm stranded conductor, complete complete all as specified and directed.
Exhaust fan with louvers of size 380mm sweep, 900 RPM, 230 volts (single phase) complete with bolts, nuts & washers, embedded in the wall including provisioning of three core flexiable copper cord of size 23/0.0076 of required length from ceiling rose or connector to Exhaust fan for connection, complete all as specified & directed
Storage water heater (Geyser), vertical type, of 25 ltr capacity of inner tank, outer tank, syphon assembly, thermostat heating element, safety valve etc complete all as per manufacturer design and specifications including making of all fixing arrangements complete having BEE Five Star Rating including grouting of fastner /nuts and bolts and necessary PCC work all as specified and directed. Make:- VENUS 'SPLASH 02 GL' / RACOLD 'ETERNO 2 25 V' / BAJAJ 'MAJESTY 25L GMU' / HAVELLS 'PURO PLUS 25L'
Sub main wiring with two single core PVC insulated multistranded un-sheathed FRLS cable of size 2x2.5 Sqmm with stranded copper conductor, drawing into PVC conduit of suitable size with continuous PVC insulated multistranded unsheathed FRLS cable earth wire of 2.5 Sqmm dia including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Two run of 2.5 Sqmm wire, one run of 2.5 Sqmm wire and one run of PVC conduit shall be considered as one unit length.
Stop/gate valve of cast copper alloy (ISI marked), screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs, complete all as specified and directed.
Stop/gate valve of cast copper alloy (ISI marked), screwed down high pressure, screwed both ends for iron pipe or for unions 20 mm bore, fixed in repairs, complete all as specified and directed.
40mm dia GI steel water tubing, light grade ISI marked, with and incl all fittings and fixed to column for fixing gate light complete all as specified.
Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion.
M/S KOTWAL CONSTRUCTIONS
Bidder Name
M S BANSI LAL CONSTRUCTION CO
M/S KOTWAL CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .