1.npp sandila ayushman mandir upkendra begamganj block sandila ke prangad va baoundry marmmat va rangai putai va prangad me intrlockin va chat par florring va ek lohe ka gate nali vv

Providing and Laying cement concrete 1:6:12(1cement,6 fine sand, 12 graded aggregate 40mm. Nominal size) including supply of all materiales, labour and T&P etc.required for proper comoletion of the work and curing complete also including cost of from work in foundation & floors.as si no.- 273

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

M-150 class Brickwork in 1:4 cement & C-sand mortar in foundation & plinth including supply of all material labour T&P complete job SI.No. 307

12mm thick plaster with cement mortar in proportin of 1:4 cement &Fine sand of 1.25 FM

Laying of 80 mm thick pre moulded inter locking paver tiles over 20cm compected GSB including 4 cm thick coarse sand bed over prepared surface including all labour T&P etc required for proper completion of work

Providing and laying vitrified tiles in different size (thickness to be specified) by the manufacture) with water absorpition less than 0.08% and conforming to IS 15622 of approved brand&manufacture in all colours and shade in skirting riser of steps laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15477, in average 6mm thicknes including grouting of joints (payment for grouting of joints to be made separately) DSR 11 47 2 2021 Size of Tile 600x600mm

RCC work with cement approved coarse sand and 2 cm (3/4) gauge approved stone ballast in the proportionof 1:1.5:3 for the RCC raft foundeation and ballast excluding supply of all reainforcement and its binding supply of all reinforcement and its binding the same with 24 B.W.G.GI binding wire and including necessary centering and shuttering etc and also including supply of all matrial labour and T&P Etc required for proper completion of thge work. (PWD -289) (For Drain)

Mild steel or iron in plain work shuch as reainforced concrete or reinforcred brick work (when not included in over all rates) wrougth to requiredshape as necessary including bending for proper completion of the work and including supply of all steel and wastage & over lapping & hooks (PWD- 504)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 Itr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (DSR - 13.47.1)

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plasterd wall surface even and smooth surface (DSR-13.80).