PROVISION OF CIVIL WORKS FOR PARKING SHED OF FIRING UNITS (FU) FOR MRSAM (ARMY) AT RCI, HYDERABAD

Amount

SUBHEAD - I : EARTH WORK :

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (a) All kinds of soil.

b)Ordinary rock

c)Hard rock (Blasting prohibited)

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (a) All kinds of soil.

Excavation Work by Mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

a)Ordinary rock

b)Hard rock (Blasting prohibited)

Extra for every Additional Lift of 1.5 m or part there of in excavation / banking excavated or stacked materials.

a) All kinds of soil

b)hard rock

Filling Available Excavated Earth (Excluding Rock) in trenches,Plinth sides of foundatios etc,in layers not exceeding 20cm in depth consolidating each diposited layer by ramming and watering,lead upto 50meter and lead upto 1.5meter

Supplying and filling of approved earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Supply of approved moorum obtained from outside MOD land filling in layers not exceeding 20cms thick at all heights and depths in foundations, pits, trenches, sewer lines around structures and foundation under floors other places including dressing and levelling watering, consolidation to achieve minimium of 95% proctor density etc., complete as per drawing specifications, payments shall be made for the quantity after deducting the voids.

Supplying and filling in plinth with river sand under floors, including watering,ramming, consolidating and dressing complete.

Credit of Hard rock

SUB HEAD - II : ANTI TERMITE TREATMENT WORK:

Supplying chemical emulsion in sealed containers including delivery as specified. (a) Chlorpyriphos/ Lindane emulsifiable concentrate of 20%.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (a) Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: (i) With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (a) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: (i) With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.

SUB HEAD - III : PLAIN AND REINFORCED CEMENT CONCRETE WORK:

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

a) 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : a) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing and laying in position Machine Batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).

a) All works upto plinth level.

b) All works above plinth level upto floor V level.

c) Extra for Deduction of not pumping of concrete to site of laying.

Providing and laying in position Ready Mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durability as per direction of the Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum.Excess/less cement used as per design mix is payable/recoverable separately)

a) All works upto plinth level.

b) All works above plinth level upto floor V level.

c) Add / Deduct for using extra cement in the items of design mix over and above the specified cement content therein.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

a)Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) including Providing & applying a coat of DAMP PROOF membrane approved on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification ( per 50 kg cement).

Centering and shuttering including strutting, propping etc. and removal of form for:

a) Foundations, footings, bases of columns etc. for mass concrete.

b) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

c) Lintels, beams, plinth beams, girders, bressumers and cantilevers

d) Columns, Pillars, Piers, Abutments, Posts and Struts.

e) Weather shade, Chajjas, corbels etc., including edges.

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

SUB HEAD - IV : BRICK WORK:

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : (a) Cement mortar 1:6 (1 cement : 6 coarse sand.

Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).

Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.

SUB HEAD - V : PLASTERING & FINISHING :

Providing of 6mm cement plaster of mix in all surface with (a) cement mortar 1:3 (1 cement : 3 fine sand) at all levels.

Providing of 12 mm cement plaster of mix in all surface with (a) cement mortar 1:6 (1 cement : 6 fine sand) at all levels.

Providing of 15 mm cement plaster on the rough side of single or half brick / C.C wall of mix: (a) 1:6 (1 cement : 6 fine sand) at all levels.

Providing of 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.

Providing and Applying two coats of oil bound distemper of approved brand and shade over and including one coat of primer, including preparation of surface etc.,complete as directed.& with plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Finishing walls with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Providing and applying two coats of synthetic enamel paint of approved brand and shade over a coat of primer including preparation of surface and applying approved brand putty on following surfaces at all levels and locations etc., complete. Steel surfaces with zinc chromate primer.

Providing & fixing chicken wire mesh at the junctions of RCC and C.C , 200mm overlapping on both sides with all necessary hardware etc., complete with guage and mesh size - 20swg and 20mm mesh

SUB HEAD - VI : FLOORING WORK:

Providing and Laying 200mm thick Vaccum dewatered cement concrete 1:1.5:3(1 cement ;1.5 coarse sand and 3 graded aggregate of 20mm)flooring in alternate panels of 3x4m including reinforcement 16mm at 150c/c .Vaccum dewatered technic to accelerate the evaporation of excess water in green concrete using rigid or flexible suction mat incorporating filter layer and vaccum generators (80 to 90% vaccum to be applied at the rate of 3 to 5 minute per 25mm depth ) all as per specification including cutting grooves 4mmx20mm deep in flooring with diamond saw cutting machine before the concrete is seven days old including providing and filling the grooves with polysulphate sealant of approved make or equivalent (modified semi rigid epoxy joint filler ) including cost of required the panel shuttering work with steel channel and as per direction of Engineer-In- charge.The work shall be carried out by specialized agency approved by Engineer -in charge NOTE:-Reinforcement shall be payable seperatly as per item no: 35

SUB HEAD - VII : PRE ENGINEERED, STEEL WORK,WOOD WORK / UPVC WORK :

Providing and fixing factory made UPVC white colour sliding or openable glazed window upto 1.65 m in height dimension comprising of uPVC multi-chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mmthick galvanized mild steel section made from roll forming process of requiredlength (shape & size according to uPVC profile), appropriate dimension of uPVCextruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile,zinc alloy (white powder coated) touch locks with hook, zinc alloy body with singlenylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm sizefor fixing frame to finished wall and necessary stainless steel screws etc. Profileof frame & sash shall be mitred cut and fusion welded at all corners, includingdrilling of holes for fixing hardware's and drainage of water etc.

After fixing framethe gap between frame and adjacent finished wall shall be filled with weather proofsilicon sealent over backer rod of required size and of approved quality, all completeas per approved drawing & direction of Engineer-in-Charge. (Single / double glasspanes, wire mesh and silicon sealent shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance indimension i.e. in depth & width of profile shall be acceptable. Variation inprofile dimension in higher side shall be accepted but no extra payment onthis account shall be made

a)Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.

Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable

Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)

Providing and fixing glazing in upvc door, window, ventilator shuttersand partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the Architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

a)With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. (a) Fixed to openings /wooden frames with rawl plugs screws etc.

Supplying and fixing of Motorized rolling shutter, Curtain made of single skinnedGalvalume steel laths with natural finish, oressed galvalume steel hood & motor cover with natural finish,CE certified CRS compact gear P.R.C. Make indirect drive operator with three stations push button with deadmand control (Make:Gandhi automation or equivalent)

Supply and erection of Pre-Engineered steel building sections as per the general arrangement of plans & sections. All Primary structural members such as columns & Beams shall be cold formed steel which has a minimum yield strength of 345 Mpa and will confirm to the physical specification of ASTM A-607 (Grade 50 or equivalent). All other miscellaneous secondary members shall have a minimum yield strength of 250 Mpa.

Supply and erection of Pre-Engineered steel building sections as per the general arrangement of plans & sections. All secondary structural framing such as girts, eaves struts, wind bracings, flange bracings, base angles, clips, and other miscellaneous structural partsshall be cold formed steel which has a minimum yield strength of 345 Mpa and will confirm to the physical specification of ASTM A-607 (Grade 50 or equivalent). All other miscellaneous secondary members shall have a minimum yield strength of 250 Mpa.

Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Hot finished welded type tubes

Structural steel work in single section, for base plates, J bolts fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

SUB HEAD - VIII : ROOFING

Supplying and fixing of precoated Zincalume / Galvalume sheet roofing of 0.5mm TCT -AZ-150, 550 mpa (Alumunium Zinc Alloy coating of 150 gms, per sqm total on both sides) as per AS: 1397 in cover width of 1000-1020 mm, (size, shape and pitch of corrugation as approved by Engineer-in-charge).The end rib shall be aesigned for anti-capillary action, to avoid any seepage of water through the lateral overlap. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Hi-strength steel with min. 550 MPa yield strength. The steel sheet shall be fastened with 25 pm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of approved make with EPDM washer as per the requirement considering the profile shape and design load. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12meter or as directed by Engineer-in- charge.(Make - Tata or Equivalent)

Providing & fixing 4 mm thick polycarbonate sheet skylight over the cut outs as shown on drawings, fixing the polycarbonate sheets to the MS closed structure by means of aluminium extruded sections, EPDM gasket screwed to the steel structure & sealing the joints completely with approved sealent to make them waterproof, inclusive of closing the vertical gaps with the same sheet, cleaning, inishing neat, scaffolding upto any height etc. complete all as per directions of the EIC. The rate to include for all the laps & wastages, flashings etc. Only net laid area of the sheet shall be measured for payment.

Providing and fixing on wall face unplasticised Rigid Single socketed PVC rain water pipes conforming to IS : 13592 Type A, along with injection moulded fittings as required e.g., bends on any angle, sockets, junction, cowls, offsets, access pieces, including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, providing and fixing MS stays & clamps and cutting & making good the holes in floors and walls wherever required etc. all complete. (For Rain water pipe).

(a) 150 mm diameter.

Providing and fixing 2mm thick Co-Polymer net of approved colour with 35x35mm mesh at the bottom truss at height of 6mtr to prevent sitting of birds including tightening of the mesh with necessary nuts , bolts and washers as required complete as per the direction of Engineer in charge

Supplying and fixing 'TURBO AIR VENTILATORS' of size 24 Inch Non Magnetic Air Ventilator 36 nos. SS blades including base plates Single piece FRP base of size appox 6 feet (L) x 3.5 feet(W) x 1.5 feet (H) of 2 mm thick of CFM 3638 to 6680 m3 /hour depend on height and wind velocity ofTemprature reduction 3-7 degree celsius depend on wind velocity and Temp.difference between ambient & working area including all as directed by engineer.

SUB HEAD - IX : SANITARY INSTALLATIONS WORK :

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (a) White Vitreous China Table Top Basin (Make : Hindware,Jaquar or equivalent) (Hindware Cat. No. -10001)

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in- charge.(Make : Hindware,Jaquar or equivalent) (Hindware Cat. No. -F850015)

Providing and fixing Stainless steel connection for flush pipe of Grade 304 stainless steel connecting with wash basin, W.C. pan.(Make-Alton ALT2005,Havells or equivalent)

Providing and fixing 600 x 300 mm beveled edge Mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per the direction of Engineer-in- charge.(Make : Saint Gobain ,Cera or equivalent) model-5567

Providing and fixing CP liquid soap dish (brass) 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 205gms. (Make : Jaquar or equivalent)(Hindware Cat. No. F880011)

Providing and fixing C.P. brass bib cock with wall flange of approved quality conforming to IS:8931 : (a) 15 mm nominal bore (Make : Jaquar or equivalent)

Providing and fixing Nahani Trap of size 110 X 75mm. (Make : Birla Aerocon or equivalent)

SUBHEAD - X : SOIL WASTE AND VENT PIPE AND FITTINGS WORK:

Providing and fixing SWR uPVC pipes (Type-B) confirming to IS 13592 : 1992 complete with all fittings e.g. plain or door bends, junctions, cowls, offsets, access pieces etc. jointing with rubber rings and solvent cement including fixing the pipes on wall face with MS galvanized holder bat clamps or suspended below ceiling with MS galvanized hangers/supports and fasteners all as approved by the engineer in charge including Cutting holes in walls, floors excavation, refilling and disposal of surplus earth wherever required and making good . (a) 110 mm dia.

Providing and fixing uPVC deep seal 'P' or 'S' of self cleansing design with or without vent arm with provision for connecting uPVC inlet fitting complete including cost of cutting and making good the walls and floors wherever required. (a) For 110mm inlet and 80mm outlet.

Providing and fixing uPVC threaded waste pipes (I.S:4985-2000) Class - 6 including all fittings e.g bends, junctions, elbows, tees, offsets etc. jointing with screwed joints including cutting holes in walls, floors excavation, refilling and disposal of surplus earth wherever required and making good.

(a) 32 mm nominal bore.

(b) 50 mm nominal bore.

(c) 80 mm nominal bore.

SUBHEAD - XI : EXTERNAL WATER SUPPLY SYSTEM:

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work

Supplying and fixing in position best quality and approved make heavy quality screws down gun metal gate valves with hand wheel of the following sizes fixed to service lines including testing, making good the leakages, if any etc.,

a)25mm nominal bore.

b)20mm nominal bore.

(c) 32 mm nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External Work

(a) 32 mm dia nominal bore

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : (a) With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.

Providing & Fixing HDPE O.H water storage tank of the approved quality, & of the following capacity including making solid supported base as per instructions & doing all connections as required to make the work complete in all respects as approved by Engineer-in-charge.

Providing & fixing sqare mouth S W Gully trap grade A complete with CI grating brick machinery chamber with water tight C I cover with frame of 300x300 mm (Size inside ) The weight of cover to be not less than 4.5 kg & frame to be not less than 2.70 kg as per standard design.

a)100x100 mm size P type.

Geological Survey by specialist Agencies and submitting the report for number of polt surved and yield available

Boring/drilling bore well of required dia for casing/ strainer pipe, by DTH method prescribed in IS: 2800 (part I),Conducting yield test as per V Notch method and submission of yield report, Including filling of filter media clamps, including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.

125MM - All types of soil

125MM - Rocky strata including Boulders

Boring/drilling bore well of required dia for casing/ strainer pipe, by DTH method prescribed in IS: 2800 (part I),Conducting yield test as per V Notch method and submission of yield report, Including filling of filter media clamps, including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, beyond 90 metre & upto 200 metre depth below ground level.

125MM - All types of soil

125MM - Rocky strata including Boulders

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs,having thermal stability for hot & cold water supply, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.,

150 mm nominal size dia

Providing HDPE pipe PE-80 grade (12.5 kg/ sq.cm) of 63 mm OD for bore wells

Supply, erection, testing and commissioning of 3 Cu.m/hr at 70 m head submersible pump set 3Phase-415V, 50 Hz, 2 HP/ 12 stages, 2900 rpm as approved by Engineer in charge at site

Supply, erection, testing and commissioning of Gun metal Check valve (Non return valve PN-10) conforming to IS 778 with screwed ends type with bolts, nuts and rubber insertions etc., complete and of following sizes

Supply, erection, testing and commissioning of Brass / GM / Bronze Air Release valves with threaded ends of following sizes

Supply, erection, testing and commissioning of pressure gauges with range of 0-10 bar along with isolation cock and pipe for bore wells

Providing maintenance free Earth station with consisting of 40 mm dia pipe standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, sealed at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5 mtrs. Bentonite compound (as per equipment supplier) upto a depth of 2.0 meters around the electrode capsule. Brick chamber & CI Cover complete

Supply and laying of following size strips including excavation and refilling of each when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and equipments

25 x 5 mm hot dip galvanized iron strip

8 SWG GI Wire

Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth. including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m in All kinds of soils

Pipes, cables etc. not exceeding 80 mm dia

Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m

Pipes, cables etc. not exceeding 80 mm dia. in Ordinary Rock

Pipes, cables etc. not exceeding 80 mm dia. in Hard Rock (Blasting Prohibited)

Supply, Laying, testing and commissioning of Medium grade G.I. Pipes conforming to IS 1239 Part - I including all necessary fittings etc., complete for sizes

Supply, Erection, testing and commissioning of Cast Iron Butterfly valves (Wafer type) (PN-10) above nd upto 50mm dia with necessary flanges, bolts, nuts etc., and gun metal gate valves from 40mm dia and below

50NB(GM Gate Valve)

40NB(GM Gate Valve)

32NB(GM Gate Valve)

25NB(GM Gate Valve)

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete

50 to 80 mm nominal bore

Providing and fixing gun metal non- return valve of approved quality (screwed end) :Vertical (a) 50 mm nominal bore

Supply, laying and commissioning of following size 1.1KV grade PVC insulated flexible Copper conductor in the bore with all installation materials. The cable shall conform to IS 694

3C x4sqmm (copper )PVC Aroumred Cable from LT Panel

3C x4sqmm (copper ), pvc Flat Water proof cable

Conducting water yield test without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete

200mm clamp

SUBHEAD - XII : EXTERNAL SEWERAGE SYSTEM

Excavating trenches of required width for pipes etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

a)80 mm dia. but not exceeding 300 mm dia

Providing and laying of 150 dia s.w pipe including honching around the pipe in 100mm thick with cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:

a)150 mm diametre S.W. pipe

b)100 mm diametre S.W. pipe

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions,total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : (a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

SUB HEAD - XIII : ROAD , DRAINS AND HARD STANDING

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.

a)All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

(a) All kinds of soil.

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: (a) All kinds of soil.

Supply of approved moorum obtained from outside MOD land filling in layers not exceeding 20cms thick at all heights and depths in foundations, pits, trenches, sewer lines around structures and foundation under floors other places including dressing and levelling watering, consolidation to achieve minimium of 95% proctor density etc., complete as per drawing specifications, payments shall be made for the quantity after deducting the voids.

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a) 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying cement concrete :1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size) in pavements, laid to required slope and camber in panels as required including mixing of hardening compound of approved quality as per manufacturers specification in cement concrete, consolidation finishing and tamping complete using steel form work with sturdy MS channel sections, curing, making provision for contraction/expansion, construction & longitudinal joints (10mm wide x 50mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of engineer-in-charge.

Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.

40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100- 120 TPH capacity.

62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding thecost of nosing of steps etc. complete.

Providing and laying non- pressure NP2 class RCC pipes with collars joints with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc., complete for culverts, road crossings of electric cables, water supply pipe line and telephone cable etc.,

Random Rubble Masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :

a)Cement mortar 1:6 (1 cement : 6 coarse sand).

Providing of 15 mm cement plaster of mix in all surface with (a) cement mortar 1:6 (1 cement : 6 fine sand) at all levels.

Providing Rain Water Harvesting pit of size 2m dia and 2.5m depth. The pit shall have 750mm of 40mm stone agreegate at the bottom over which there shall be 750mm of 40mm of stone agreegate and 1000mm of coarse sand filling respectively. Brick work allround the periphery of the pit 300mm below ground and 150mm of above

SUBHEAD - XIV : ARBORICULTURE

Supply of Grass and planting by dibbling the area including watering & Maintenance of Lawn for 30 days or more till grass forms a thick lawn cushion free from weeds. With Bermuda Grass (15 cm x 15 cm apart) Including 3 months maintenance after completion of work

Trees:- Digging of pits of size 1x1x1m and refilling with good agriculture soil and well decomposed cattle manure in 4:1 ratio. Supply and planting of approved Tree species of healthy grownup saplings with good root system. Saplings should be of minimum 4 ft height from ground level after plantation. Maintenance includes, regular watering, de-weeding, loosening of soil fortnight, manuring with cattle manure and fertilizer, training, pruning, staking and spraying of insecticide and fungicide, Including 3 months maintenance after completion of work

( I) AVENUE / FLOWERING TREES /Palms

(II) STRUCTURAL TREES

Supply and plantation of approved varieties of healthy, disease free, stout stem & well developed root system tree sapling of, 5’- 6’ height, with a clear minimum height of 4’-5’ from basin/ ground level, after plantation. Staking the tree sapling upto 3/4 height with appropriate strength of bamboo stick. Lower 1 feet of stake portion should be treated with anti-termite chemical. Including 3 months maintenance after completion of work

(i) Phonix Palm

(ii) Red Palm

(iii) Golden Palm

(iv) Fox Tail Palm

(v) Areca Palm

Shrubs: Digging of pits of size 0.60x0.60x0.60m and refilling with good agriculture soil and well decomposed cattle manure in 3:1 ratio. Supply and planting of approved Shurbs species of healthy grownup saplings with good root system. Saplings should be of minimum 2 ft height from ground level after plantation. Maintenance includes, regular watering, de-weeding, loosening of soil fortnight, manuring with cattle manure and fertilizer, training, pruning, staking and spraying of insecticide and fungicide, Including 3 months maintenance after completion of work

Hedges: Digging of trenches of size 0.30 x 0.30m (width & depth) and refilling with good agriculture soil and cattle manure in 4:1 ratio. Maintenance includes, regular watering, de-weeding, loosening of soil fortnight, manuring with cattle manure and fertilizer, pruning, shaping and spraying of insecticide and fungicide,Including 3 months maintenance after completion of work

Flower Beds: Digging upto 0.10m refilling with good soil and cattle manure in 3:1 ratio. Preparation of beds supply and planting of healthy grown up plant material. Maintenance includes regular watering, de-weeding, manuring with manure and fertilizer.pruning, shaping and spraying of insecticide and fungicide,Including 3 months maintenance after completion of work

Agriculture Soil: supply of good soil for filling suitable for any type of plantation at the site including leveling, spreading , refilling of pits

Clearing jungle including uprooting of trees and saplings of girth upto required size measured at a height of 1m above ground level and replanting of uprooting trees as per direction of Engineer - in - charge.

SUBHEAD- XV : INTERNAL ELECTRIFICATION

Light/Fan Fixtures

Supply of the following LED Light Fixtures with electronic driver , heat dissipating element including necessary accessories etc., complete on wall/ Ceiling / suspended from ceiling/ recess including all fixing accesssories such as leads,Teak wood round block, downrods, MS clamps, nuts, GI chain and bolts etc complete as required.

Supply of 70W high efficient LED High bay light fixture, PDC LM6 Housing, Luminaire system efficacy 150lm/W, System Lumens 10000lm, IP65 protection, IK08, surge protection 4 kV, driver efficiency >90%, power factor > 0.95, THD ≤10%,LED used to be SMD LED, MacAdam<5 LED Type for better color matching & to avoid color shift with LED binning as per ANSI standard,colour rendering index CRI >80, temperature range -10 to 55 degree centigrade, CCT: 5700K, Lifetime of LED 50K hours @L70 B50 @45 degree ambient, photo biological safety report as per IEC 62471, Voltage range 120-270V AC, Electricals insulatuation Class-1 Philips Cat No: BY515,Equivalent Make of Wipro.

Installation, testing and commissioning ofHighbay LED fitting of all types, complete with all accessories Sutabule Supports for Suspended Highbay Lights from Struss including connections with Exisitng 2.5 sq. mm XLPE insulated, AR copper conductor etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

8 way (4 +24), Double door

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current Circuit breaker with Overload (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 A, Four Pole, RCCB, 30mA.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

5A - 32A, Single pole, MCB, 10kA

Supply of following size 1.1KVgrade XLPE insulated armoured Copper conductor underground cable, The cable shall conform to IS 7098 Part-1.

3C X 2.5 Sq.mm Copper

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE/ copper conductor cable of 1.1 kV grade as required.

3C X 2.5sq. mm Pin type Lungs for Light Fixtures

SUB HEAD-XVI : POWER WIRING

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 16 A modular socket outlet and 16 A modular switch, connections etc. as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

6 way (4 +18), Double door

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current Circuit breaker with Overload (RCCB), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 A, Four Pole, RCCB, 100mA.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

5A - 32A, Single pole, MCB, 10kA

Supply of following size 1.1KVgrade XLPE insulated armoured Copper conductor underground cable, The cable shall conform to IS 7098 Part-1.

4C X 16 Sq.mm Copper

4C X 6 Sq.mm Copper

3C X 4 Sq.mm Copper

6C X 1.5 Sq.mm Copper Control Cable with Termination

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE/ copper conductor cable of 1.1 kV grade as required.

4C X 16 sq. mm (28mm)

4C X 6 sq. mm (22mm)

3C X 10 sq. mm (22mm)

3C X 4 sq. mm Pin type Lungs for Sockets & Rolling Shutter Isolators

Providing and fixing 50 mm X 6 mm G.I. strip on Cable tray for connections etc. as required.

Providing and fixing 25 mm X 3 mm G.I. strip on Cable tray and for connections etc. as required.

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.d.

450 mm width X 50 mm depth X 2.0 mm thickness

225 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

SUB HEAD-XVII : LIGHTNING PROTECTION SYSTEM

Supply installation and testing of of 2/2.5 meter vertical air air terminal with mounting accessories on Metal Sheet ( Includes + stand + connecting point + interception tip)

Supply and laying of following size strips including all necessary inter connections between earth station and equipment. supports for strips as applicable .

32 X 5mm Aluminium strip with DMC Insulated Supports

50 X5mm GI strip laid in ground

Supply and installation of Test link fuse as required complete set.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

SUB HEAD-XVIII : EXTERNAL POWER SUPPLY

11KV Single Breaker Extenstion panel at Existing substation with suitable Adaptor Box, Bus Bar etc complete as per the following. (It shall match in respect of height, width, colours etc). Supply installation Testing and commissioning of 11KV 630A Indoor HT Vacuum Circuit Breaker Panels consisting of number of Breakers as given below. The VCBs shall be with Motorised Spring Charging (110V DC) mechanism and shall be as per detailed specifications.All VCBs shall have auxilary Relays and Annunciation as specified in Technical specifications.The Closing & Tripping Coils shall be suitable for 110V DC Supply operation, Overcurrent & earth Fault relays as specified in Drawing. All VCBs shall have provision for Remote On/Off and for Remote On/Off Indications wired upto a terminal block. Surge arrestors of 9KV, 5KA shall be provided as part of HT VCBs. Relays and control voltage shall be similar to existing breakers.Extenstion bus bars, wires shall be included in the scope of work. The panel shall consist of suitable rating TP Copper busbar (at the rating of 1.2A/Sq.mm). Incoming : 630A VCBs with Voltmeter with PT, Ammeter with CTs, Load Manager with RS 485 with Modubus connectivity, PF Meter, Numerical type Overload & Earth Fault, relays, Phase Indication Lamps, Breaker On/Off/ Trip and Spring Charge, and Trip Circuit healthy Indications - 1no

supply, installation, testing and commissioning at site 11 KV/433V, 3 phase, 50 Hz z=4.5%, delta/star connected, outdoor type 250KVA transformers, oil immersed ONAN cooled, as per energy efficiency level 2. IS 1180. complete with all fittings such as oil conservator, silica gel breather, thermometer, explosion vent, Local ON LOAD tap changer with AVR , diagram & rating pkte, oil temperature indicator, winding temperature indicator and buccholtz relay with wiring upto marshalling box, lifting lugs, first filling of oil, weather proof HT cable box, LT Cable box etc. complete as per specification Make: ABB/schneider/crompton greaves/Kirloskar.

Supply and commissioning of following size 11KV (E) grade XLPE insulated armoured aluminium conductor under ground cable, The cable shall conform to IS 7098/ Part I.

3C X 70 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Above 35 sq. mm and upto 90 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/HUME/ METAL pipe as required.

Upto 120 sq. mm

Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :

Supply, installation, Testing and Commissioning of 3 phase and Neutral 415V 4 wire Free Standing Floor mounted MV panel made out of 2mm thick CRCA/Galvanised steel enclosure for main frame and 1.6mm thick partitions after seven tank process and painting with Epoxy powder coating. The panel shall consist of suitable rating TPN Aluminium busbar (at the rating of 0.8A/Sq.mm) supported with DMC/ SMC barriers and color coded with Heat shrinkable sleeves. The Metering shall be provided as specified. The panel shall have Short circuit withstanding capacity of minimum 50KA and consist of the switchgear as mentioned below.The panel shall be got fabricated from CPRI Approved manufacturers. Indoor panels shall have IP-4X degree of protection and outdoor panels shall have IP-55 degree of protection wiith external door . Enclosure shall be modular with bolted design. Enclosure shall be powder coated with RAL-7035 coat with matt finish. Design ambient temperature shall be 50 degree centrigrade. No use of hygroscopic material like FRP/Hylam/Bakellite sheet inside the panel for partitions or any other purpose.

LT KIOSK

Providing and fixing Cubical panel borad with following rating and breaking capacity of MCCB with TMD based release and No. and 1 Set of Indication Lamps, LED type, R,Y,B and breaker 'ON' , 'OFF', 'TRIP' & spring charged lamps.

630 A, 50KA,TPMCCB form Transformer

MAIN PCC PANEL

EB INCOMERS (LT Kiosk to PCC Panel)

MCCB, with Microprocesssor release with O/C,S/C,E/F 630Amps, 50kA, FP,. - 1 SET

Incomer shall have one set of the following items:

0 - 500V Digital Volt meter - 2 Nos.

0 - 630A Digital Ammeter- 2 Nos.

Multi function digital meter of suitable range to read V,A,KVA, KVAH, KWAH, KW, KVAR, PF, Hz etc with and LED display with Core Balance CTs of ratio 630/1A Class 1Accuracy and 10VA burden and control circuit wiring with MCBs - 1 No.

Core Balance CTs of ratio 630/1A Class 1 Accuracy and 10VA burden for ELR 3A-300mA–1 sets.

1 Set of Indication Lamps, LED type, R,Y,B and breaker 'ON' , 'OFF', 'TRIP' & spring charged lamps

Remotely controlled push button Station for only OFF button & Its Remotely On the breaker when Release the Push Button

BUS BAR

FP Alluminium busbar of 800A with 50 KA fault level capacity, mounted on non-hygroscopic, glass fibre reinforced insulators-1Set

OUTGOINGS

250A, 50KA FP MCCB - 1Nos

125A, 25KA FP MCCB - 1Nos

63A, 16KA FP MCCB - 6Nos

40A, 16KA FP MCCB - 4Nos

40A, 10KA DP MCB with Timer Contactor for Area Lighting- 2Nos

125A, 25KA FP MCCB with 50 KVAR Fixed capcitor - 1Nos

32A, 25KA FP MCCB with TVSS - 1set

Intelligent multi function digital meter of suitable range to read V,A,KVA, KVAH, KWAH, KW, KVAR, PF, Hz etc and LED display with required Nos CTs, 15 VA, class 1 class and control circuit wiring with MCBs - 11 Nos.

1 Lot of control wiring.1 Set of designation plates.

Two numbers 50mm X 6mm GI earthing terminals - one on each side of the panel with earth strip run inside the panel

Supply of following size 1.1KVgrade XLPE insulated armoured aluminium conductor underground cable, The cable shall conform to IS 7098 Part-1.

Supply & Fixing of Remotely controlled push button Station for ON & OFF button with Cap for protection.

3.5C X 185 Sq.mm Aluminium

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Above 95 sq. mm and upto 185 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE/ copper conductor cable of 1.1 kV grade as required.

3½ X 185 sq. mm (57 mm)

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 32 mm X 6 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.

Providing and fixing 32 mm X 6 mm Copper strip on surface or in recess for connections etc. as required.

Supplying and laying 50mm X 6 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.

Providing and fixing 50 mm X 6 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including etc. complete : testing of joints

300 mm dia. R.C.C. pipe

SUB HEAD-XIX : FIRE FIGHTNG

Supply of the following safty as per standards and specification

Fire Extinguishers - 4.5 KG CAPACITY CO 2 Confirming to IS 2878 fitted with discharge bend pipe and horn fitted on wall

Rubber Mats 415 V, 2 m x 1 m

Shock treatment Chart with wooden frame and glass

First Aid Box

3 Nos of buckets with canopy & stand

415 V Danger Boards

11 KV Hand Gloves

SUB HEAD-XX : AREA LIGHTING

Supply and erection of steel stepped and swaged tubler poles of 9mtr. Long (410 SP25) (1.5mtr below Ground) with base plate, earthing studs,1.5Mtr out reach single/ Double arm, FRP terminal box, 2nos (0.75mtrs each) 40mm dia class B GI Pipe for incoming and outgoings cables, including Excavation in all types of soil, PCC 1:2:4, PCC Pedestal complete with painting with black bitumin paint inside the coping for embedded portion and two coats of Zinc chromate primer and two coats of Aluminium paint externally for length above the ground. The pole shall be with FRP Junction box consisting of 10A MCB. The wiring from Junction box to Light fixture shall be carried out with 3core 2.5sq.mm Copper conductor cable. Make: BAJAJ / VALMONT / TRANSRAIL

Supply and Fixing of 60W high efficient LED Street light fixture, single piece Aluminum Pressure Die Cast Housing( LM6 Alloy) Luminaire system efficacy >110lm/W, System Lumens 6800lm, high purity polycarbonate/glass diffuser, with silicon gaskets for IP66 (No Glue) protection, IK07, name of the company or logo must be embossed,in built electronic driver with phase to phase protection at 440V for 8 hours with high voltage cut off and should have auto recovery features, Metal fully potted and encapsulated driver to protect against moisture with of constant current low/over voltage protection (Under Voltage protection should Survive Input Voltage Stress of 100V for 48 Hrs) duly wired up to terminal block, surge protection 4 kV and optional 10kV within the driver compartment, IEC 60598 to be followed, driver efficiency >88%, power factor > 0.95, THD ≤10%,driver make must be as luminares LED used to be SMD LED,secondary optics is must for better light distribution,<5 MacAdam LED Type for better color matching and to avoid color shift with LED binning as per ANSI standard, LED must be mounted on quality MCPCB & avoid mutiple soldering and frequent failure of LED chip, LED Makes : Nichia/ Cree/ Osram/ Philips Lumiled, , colour rendering index CRI >70, temp range 0 to 45 degree centigrade, CCT: 5700K, Lifetime of LED 50K hours @L70 B50 (As per TM21), photo biological safety report as per IEC 62471, Voltage range 120-270V AC including taking down existing street light fitting complete all as specified and directed. MAKE : Bajaj/Phillips/Wipro/Crompton

Supply, erection and commissioning of individual 3mtr (600mm below Ground) high 65mm dia Class B GI pole, 750mm out reach single arm complete with base plate FRP terminal box, wiring from terminal box to the fixture with 3 core 2.5sq.mm copper conductor cable, MCB Control and 2nos of 40mm dia Class B GI pipe for incoming and outgoing cables etc including PCC foundations, pedestal Make: BAJAJ / VALMONT / TRANSRAIL

Supply and Fixing of 40W high efficient LED Street light fixture, single piece Aluminum Pressure Die Cast Housing( LM6 Alloy) Luminaire system efficacy ≥120lm/W, System Lumens 4800lm, high purity polycarbonate/glass diffuser, with silicon gaskets for IP66 (No Glue) protection, IK07, name of the company or logo must be embossed,in built electronic driver with phase to phase protection at 440V for 8 hours with high voltage cut off and auto recovery features, Metal fully potted and encapsulated driver to protect against moisture with constant current low/over voltage protection, (Under Voltage protection should Survive Input Voltage Stress of 100V for 48 Hrs) duly wired up to terminal block, surge protection in 4 kV and optional 10kV within the driver compartment, IEC 60598 to be followed, driver efficiency >88%, power factor > 0.95, THD ≤10%,driver make must be as luminares LED used to be SMD LED,secondary optics is must for better light distribution,<5 MacAdam LED Type for better color matching & to avoid color shift with LED binning as per ANSI standard,LED must be mounted on quality MCPCB & avoid mutiple soldering and frequent failure of LED chip, LED Makes : Nichia/ Cree/ Osram/ Philips Lumiled, , colour rendering index CRI >70, temperature range 0 to 45 degree centigrade, CCT: 5700K, Lifetime of LED 50K hours @L70 B50 (As per TM21), photo biological safety report as per IEC 62471, Voltage range 120-270V including taking down existing street light fitting complete all as specified and directed. MAKE : Bajaj/Phillips/Wipro/Crompton

supply erection and commissioning of 16 Mtrs Polygon High Mast with single section of 3mm thick of Bottom 360mm and Top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 16 Mtrs . Mast shall be hot dip galvanized and suiatble for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool , and necessary cable trailer connections and single speed motor with M 24 x 800 mm foundation bolts of required quantity, including Excavation in all types of soil, PCC 1:2:4, PCC Pedestal complete with painting with black bitumin paint inside the coping for embedded portion and two coats of Zinc chromate primer and two coats of Aluminium paint externally for length above the ground. The pole shall be with FRP Junction box consisting of 10A MCB. The wiring from Junction box to Light fixture shall be carried out with 3core 2.5sq.mm Copper conductor cable. Make: BAJAJ / VALMONT / TRANSRAIL

Supply and Fixing of 155W high efficient LED Flood light fixture, Aluminum Pressure Die Cast Housing(ADC12 alloy) alongwith mounting bracket for aiming, Luminaire system efficacy ≥120lm/W, System Lumens 18500lm, high purity polycarbonate/glass diffuser, with silicon gaskets for IP66 (No Glue) protection, IK08,name of the company or logo must be embossed,in built electronic driver with phase to phase protection at 440V for 8 hours with high voltage cut off and auto recovery features, Metal fully potted and encapsulated driver to protect against moisture with constant current, low/over voltage protection (under Voltage protection should survive Input Voltage Stress of 100V for 48 Hrs) duly wired up to terminal block, surge protection 4 kV and optional 10kV within the driver compartment, IEC 60598 to be followed, driver efficiency >88%, power factor > 0.95, THD ≤10%, colour rendering index CRI >70, temperature range 0 to 45 degree centigrade, CCT: 5700K, Luminaire and driver must be same make, LED used to be SMD LED,secondary optics is must for better light distribution,<5 MacAdam LED Type for better color matching and to avoid color shift, LED must be mounted on quality MCPCB to avoid mutiple soldering and frequent failure of LED chip, LED Makes : Nichia/ Cree/ Osram/ Philips Lumiled, Lifetime of LED 50K hours @L70 B50 (As per TM21), photo biological safety report as per IEC 62471, Voltage range 120-270V AC including taking down existing street light fitting complete all as specified and directed. MAKE : Bajaj/Phillips/Wipro/Crompton

Providing Spiral coil earthing with 8 SWG GI wire including spreading of salt and charcoal as per IS 3043/87 with latest amendments.

Supply of following size 1.1KVgrade XLPE insulated armoured aluminium conductor underground cable, in built up cable trench/ already laid RCC hume pipe / on surface of slab and walls with clamps or on cable tray with all installation materials. The cable shall conform to IS.

3C X 4Sq.mm Aluminium

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required

Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

3C X 4 sq. mm for Pin type

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)

8 way, Double door

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, RCBO having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 A DP RCBO, 30mA

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

5A - 32A, Single pole, MCB, 10kA

Sri Raghava Constructions Limited

SREEKRISHNACONSTRUCTIONS

SAI CONSTRUCTIONS

INTER CONTINENTAL CONSTRUCTIONS (INDIA) LIMITED