8671REPAIRS TO ROOF FOORING JOINERY SANITARY FITTINGS PLASTERING SUNKEN FLOOR ANTI TERMITE TREATMENT AND MISC WORKS AT 6TH CAMP AND ETI UNDER AGE B R EAST OF GE M AF STATION JALAHALLI BANGALORE

Amount

Demolition of cement concrete (unreinforced) as in ground floors and pavings not exc. 15cm thickness (below or above ground level) complete all as specified.

Material and labour for 40 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring finishing the surface even and smooth without using extra cement all as specified.

Material and labour for 75mm thick PCC 1:3:6 type C-2 as plinth protection/sub base etc and all as specified and directed.

Material and labour for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding/under floor Brushbond Roof guard treatment) with WPC all as specified and directed(WPC shall be measured and paid separately)

Material and labour for Providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating Brushbond Roof Guard in 3 coats of application @ 0.5 litre/m2/coat, The Product should have following Properties: Solid Content : 70 % Tensile strength (ASTM D 412) : 1.10 MPa Elongation (ASTM D12): 100 % Resistance to ageing due to UV radiation: 1000 hours No change Rapid Chloride Penetration : Very low Resistance to Algae growth: Passes, Zero Rating/ Permeability (mm) : 5.0 Water vapour transmission: 6.0 g/ m² h No. of coats : 3 (minimum) Adhesive bond strength : > 0.92 N/mm2 Make : FOSROC or equavalaint approved make

Material and labour Providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof, chajjas, coping, bed blocks and similar work including necessary form work.

Material and labour for Rendering 15mm thick in CM (1:3) on sunken concrete floor surfaces mixed with integral water proofing compound finished even & smooth without using extra cement. Note : WPC shall be measured & paid seperately

Material and labour for Applying bitumen blown 85/25 grade, applied hot, to concrete surfaces at the rate of 1.2kg per sqm per coat.

Material and labour for APP based polymeric membrane minimum weighing 4kg/sqm and minimum 4mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

Material and labour for Plain cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in filling and mass concrete

Supply only Liquid water proofing compound.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

Material and labour for Non skid ceramic coloured tiles 7 to 8 mm thick (squre/rectagular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles complete all as specified.

Material and labour for Glazed ceramic coloured tiles of size 300x200mm x7 mm thick in vertical surface, set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles laid over bedding layer complete all as specified.

Material and labour for 15mm thick screed bed or bedding layer of cement mortar (1:6) as in floor for laying floor finishes complete all as specified.

Material and labour for Rendering 10mm thick cement plaster in cement mortar (1:4) for laying the tiles as in skirting/ dados/vertical surface complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and all as specified and directed.

Material and labour for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in floor to receive tiles complete all as specified and directed.

Material and labour for pre polished granite slab machine cut, in skirting/dado, steps, jamps, pillars, window cill, cooking plateform etc of any shade as approved by GE of 20mm thick including necessary notching, charmfering the edges over cement screed bed including cutting, grinding and mirror polishing with sutable grinding stones complete all as specified and directed.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Material and labour for chequered cement concrete tiles 20cmx20cmx25mm thick set jointed and pointed with grey cement and no pigment to match the floor all as specified and directed.

Material and labour for PCC 1:2:4 type B-0 Using 12.5mm graded crushed stone aggregate as in coping, benching in floor complete all as specified and directed.

Taking down cement plaster or cement lime plaster on brick walls etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified.

Material and labour for rendering 15mm thick in CM 1:6 on concrete/brick surfaces (internal) finished even and smooth without using extra cement complete all as specified.

Material and labour for rendering 15mm thick in CM 1:4 on concrete/brick surfaces finished even and smooth without using extra cement complete all as specified.

Material and labour for Rendering 5mm thick in CM (1:3) on ceiling on fair faces of brick work or concrete surfaces & finished even and smooth without using extra cement complete all as specified.

Material and labour for Preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of primer with alkali resistant priming paint and JK Birla wall care putty all as specified.

Material and labour for Three coats of white wash on new surfaces of walls including preparation of surfaces complete all as specified.

Material and labour forprepration of new plastered surfces applying two coats of cement base paint and all as specified and directed.

Material and labour for Three coats of white wash on ceiling including preparation of newly plastered or un-plastered surfaces complete all as specified.

Demolition of brick work or stone masonary built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc 6.00 mean radius built in CM 1:6 and all as specified and directed.

Material and labour for Pre-Cast PCC 1:3:6 type C-1 (20mm graded agg) cement concrete block masonary with solid blocks exc 10cm in width and set in CM 1:6 and all as specififed and directed.

Taking down up or down 15mm bore steel tubing galvanized and connection including cleaning for re-fixing or removal from site complete all as specified.

All as per Srl item No 34 .00 above but 20mm bore.

Supply and fixing 15mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified.

All as per Srl item No 35.00 above but 20mm bore.

Supply and fixing Re-fixing old steel water tubing and connections in new or old position (walls, ceiling, floors etc) 15 mm dia

All as per item No 38 hereinbefore but 20mm dia.

Supply and fixing in repair 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

Supply and fixing in repair 15mm bore stop valves, fancy type chromium plated with long shank and cup (concealed type) screwed for iron pipe of 15mm bore .

Supply and fixing in repairs 20mm dia gun metal gate valve with iron wheel screwed both ends for iron pipe and all as specified and directed.

Supply and fixing in repair Bib tap standard of PTMT of fancy type of any colour high pressure scrwed for iron pipe and fixed (minimum weight 15mm-105gms)

Supply and fixing in repair Bib tap cast copper alloy suitable for 15mm bore pipe with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule all as specified

Supply and fixing in repair15 mm dia pillar taps, cast copper alloy, with capstain heads, chromium plated screwed down high pressure, with or without lettered "Hot" or cold with long screwed shanks and fly nuts screwed for iron pipes and fixed and all as specified and directed.

Supply and fixing in repair push button taps of cast copper alloy, screwed for 15mm dia pipe and all as specified and directed

Supply and fixing in repair swivel shower of PTMT any colour for fixing with 15mm pipe minimum weight 40gms and all as specified and directed.

Supply and fixing inrepairs vitrous china wash basin white flat back size 550x400mm including brackets, waste coupling full or half threded 32mm dia (min wt 45gms) and alll as specified and directed.

Supply and fixing in repairs Vitreous china squatting pan "Orissa pattern" size 580x440mm white with intergal foot rests (excluding flushing cistern and flush pipe) complete including provn of lime concrete bedding and making good to floor as in repairs all as specified.

Supply and fixing in repairs china wash down water closet (pedestal pattern) EWC white incl plastic water closet seat cover and mild steel chromium plated on aluminium hinging device and connecting to 'P' or 'S' incl connecting flush pipe with flushing rim and all as specified and directed.

Supply and fixing in repair vitreous china urinal bowl type of flat back, size of 465x355x265mm, white with greating & unions for discharge pipe complete including provide and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in fixing automatic flushing cistern with brackets, flush pipe, greating and unions for discharge pipe and complete all as specified and directed.

Supply and fixing in repair PVC valveless 10 litres capacity, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes complete all as specified.

Supply and fixing in repair PVC connection 15mm bore 45 cm long with two PTMT nuts and washers complete all as specified.

Supply and fixing in repair Grating doom 150 mm dia with waste hole of PTMT. (Minimum weight 100gms) complete all as specified.

Supply and fixing Sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified

Supply and fixing in repair waste coupling 32mm dia of PTMT (half or full thread) minimum weight 45 gram

Supply and fixing in repairs PVC waste pipe 32mm bore for WHB and all as specified and directed.

Supply and fixing in repairs plastic water closet seat cover white or tinted, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinge device and all as specified and directed.

Supply and fixing in repair PVC water tank Cover for 500 ltrs/1000 lits capacity PVC water tank

Supply and fixing in repair tubular towel rail alumunium annidised 20mm dia 'D' type 60cm long between flanges and all as specified and directed.

Dismantling water tanks of capacity exc 250litres and n exc 500 litres complete all as specified.

Dismantling water tanks of capacity exc 500 litres and n exc 1000 litres complete all as specified.

Dismantling water tanks of capacity exc 1000 litres and n exc 2000 litres complete all as specified.

Supply and fixing Rotational moulded polyethylene water storage tank double layer of capacity 500 Ltrs (cylindrical, vertical with closed top) hoisted and fixed in position with and including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms)brass float valve 20mm dia complete all as specified.

Supply and fixing Rotational moulded polyethylene water storage tank double layer of capacity 1000 Ltrs (cylindrical, vertical with closed top) hoisted and fixed in position with and including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms)brass float valve 20mm dia complete all as specified.

Supply and fixing Rotational moulded polyethylene water storage tank double layer of capacity 2000 Ltrs (cylindrical, vertical with closed top) hoisted and fixed in position with and including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms)brass float valve 20mm dia complete all as specified.

Demolition and bracking up 100/75mm dia drain pipes (Salt glazed ware, AC, PVC or cement) set in cement mortar all as specified and directed.

Supply and fixing 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and directed.

Supply and fixing 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and directed.

Supply and fixing PVC (SWR) bends 75mm bore any radius all as specified & directed.

Supply and fixing PVC (SWR) bends 110 mm bore any radius all as specified & directed.

Supply and fixing in repair 75mm bore PVC (SWR) floor trap with greating including jointing with solvent cement and all as specified and directed .

Taking down chowkhats exc 1.50 sqm and n.exc 4.00 sqm without taking off shutter each and all as specified and directed.

Taking down chowkhats n.exc 1.50 sqm without taking off shutter each and all as specified and directed.

Taking down shutter of any description exc 1 Sqm & n.exc 2 Sqm each complete all as specified and directed.

Taking down shutter of any description n exc 1.00 sqm each complete all as specified and directed.

Material and labour for 2nd class hard wood plain, solid straight chowkhats and frames wrought framed rebated on the solid , rounded or charmfered, puttogether with glue pinned at joints and all as specified and directed.

Supply and fixing 2nd class hard wood factory made 35mm thck Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated and all as specified and directed.

Supply and fixing 35mm thick 2nd nd class hard wood glazed or skelton shutter open rebated prepared to receive glass, gauge etc. without sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I, section 8, clause 8.24(a) complete all as specified.

Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube complete all as specified.

Supply and fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified.

Supply and fixing MS bends streps, hold fast or small articles confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

Material and labour PCC 1:3:6 type C-1 using (20mm graded stone aggregate ) as in hold fadst

Takingdown steel windows/ ventilators area n.exc 1.5 sqm each including all fittings and all as specified and directed.

Supply and fixing steel ventilators with top hung shutter including hinges, steel pegs, stay etc complete all as specified and directed.

Supply and fixing steel window with side hung shutter including hinges, steel pegs, stay etc complete with glazing bars dovetailed or welded all as specified and directed.

Supply and fixing steel window with side hung shutter including hinging devices and steel pegs, stay etc complete without glazing bars all as specified and directed.

Easing of door shutter/window shutter of size 1 sqm but n.exc 2 sqm for smooth opening, tightening of hinges, adjustment of tower bolt, sliding bolt etc comlete all as specified.

Supply and fixing 100mm size butt hinges, medium weight cold rolled mild steel mild steel medium weight

Supply and fixing 75mm size butt hinges, medium weight cold rolled mild steel mild steel medium weight

Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified.

All as per item No 92 but 100mm long

Supply and fixing in 150mm size aluminium handles cast type annodised and all as specified and directed.

All as per item No 94 but 125mm long

Supply and fixing 300mm size aluminium alloy annodised sliding door bolt with hasp stable (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and all as specified and directed

Supply and fixing and In repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing 4mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane and all as specified and directed.

Material and labour for Preparing new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel painting over and incl one coat of pink primer

Supply and fixing in repair Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each of 2nd class hard wood complete all as specified.

Hacking out old broken glass panes exc 1.5sqm description from wooden or steel frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads & prepared to receive new glass panes complete all as specified.

Supply and fixing 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm each panes complete all as specified.

Supply and fixing in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing inrepair mild steel powder coated pelmet rods 20mm dia including 02 Nos of brackets , 02 Nos of finials or side brackets as per site rquirement and 10 No of curtain rings each curtain rod complete all as specified and as directed.

Material and labour for prepration of old surface of wall including scrapping down. Smoke soot, effloresence salts trading oil and gressy spots etc by applying one coat of whitewash and all as specifed and directed.

Preparing old decorated surface of walls and applying one coat of cement base paint complete all as specified.

Material and labour for prepration of old surface of wall including scrapping down. Smoke soot, effloresence salts trading oil and gressy spots etc by applying one coat of oil bound distemper and all as specifed and directed.

Material and labour for One coat of white wash on old decorated ceiling surfaces including preparation of surfaces complete all as specified.

Material and labour for Preparation of old painted wood and wood based surface of any description, not other wise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

Material and labour for Preparation of old painted steel and iron based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Supply and fixing in repairs Stainless steel platerack 900mmx600mmx200mm deep with plate racks, spoon holders, shelves etc complete all as spcified and directed.

Supply and fixing in repair aluminium annodised hasp and staple 125mm safety type with mild steel hinge pin hinge plate and fixed with screws.

Supply and fixing in repairs 150mm aluminium handles cast type anodised and all as specified and directed.

Supply and fixing in repair 150mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor.

Supply and fixing in repair Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified.

Supply and fixing in repair 100mm size butt hinges, medium weight cold rolled mild steel mild steel medium weight

Supply and fixing in repairs Brass chromium plated health faucet high quality including fixing to 15mm bore steel pipe or union.

Supply and fixing in repairs Brass chromium plated 2-in-1 tap 15mm bore for fixing of health faucet.

Material and labour for Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litre per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

SLN ENTERPRISES

SRI MARUTHI BUILDERS

LAKSHMI CONSTRUCTIONS

SRI MAHALAKSHMI CONSTRUCTIONS

chowdeshwariconstructionco

G K CONSTRUCTIONS

shashi shekar construction