SPECIAL REPAIR TO BLDG NO P-125 TO P-127 (CHDH) UNDER GE(WEST) DELHI CANTT-10

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and as directed.

All as per srl item No. 1.00 here-in-before but not exceeding 1.5 sqm each.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

Dismantling Brick tiles or terracing tiles, single layer on roofs including thatching any type, mud phuska etc including cleaning the surface by water/air pressure and removal of debrish beyond MOD land complete all as specified and as directed.

Dismantling framed timber scantlings any size in section, in any position (as in purlins etc) complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridge complete all as specified and as directed.

Complete removal of existing treatment of painting by scraping, brusing, wahing down to open the brick or concrete original surface and raking out joints/ pointing in cement mortar to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc complete all as specified and as directed.

M&L for powder coated Anodised aluminium frame for doors, windows, ventilators, grill, partitions, sliding tracks, aluminium section for shutters suitable for two/three/four track window and aluminium section sliding members incl all necessary fittings and fixtures, jointing cleats, rubber packing etc complete all as specified and as directed.

S&F powder coated aluminium window and ventilator shutters, side hung type with/ without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2 Nos) suitable handle (1 No) complete all as specified and as directed.

M&L for powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,(handles 2 Nos in each door, 15mm aluminium hinges-3 Nos each door, 15mm Aluminium tower bolt 02 Nos each door), anodised aluminum snap beading screws etc. complete all as specified and as directed.

S&F Factory made 35mm thick second class hard wood plain framed panelled door shutters (Minimum two panels) with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The sizes of rail and stiles as per IS:1003 ( Part I), kiln seasoned and chemically pressure treated and fixed in position complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hard wood glazed / gauged shutters, open, rebated prepared to receive glass , guage etc W/O sash bars for doors as specified in SSR Part I complete all as specified and as directed.

S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors/door frames; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt 150 mm size of extruded section complete all as specified and as directed.

S&F aluminium handles cast type anodised 150 mm size complete all as specified and as directed.

S&F MS butt hinges medium weight 100 mm size fixed with MS screws complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing in cement mortar 1:4 complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in levelling couse of sub base complete all as specified and as directed.

M&L for 15mm thick screed bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L for Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded agg) for plinth protection laid in bays and finished even and fair incl filling the joint with bitumen mastic including demolition of plinth protection complete all as specified and as directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for 20mm thick, granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in 15mm tihck cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for machine cut kota stone slab 20-25 mm thick as in riser of stpes, skirting, dado and pillar, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing surface and including 15 mm thick screed bedding layer in cement mortar 1:6 complete all as spd & directed.

M&L for mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, bed plates, kerbs including weathering slightly rounded or chamfered and throating complete all as specified and as directed.

M&L for brick work in cement morta 1:6 using sub class B bricks, straight or curved on plan exc 6mtr mean radius complete all as specified and as directed.

M&L for Ready Mix plaster 15mm thick on brick or concrete surface of internal and external walls finished even and fair surface without using extra cement complete all as specified and as directed.

M & L Rendering 5mm thick in ready mix on ceiling to be finished even and fair (without using extra lime or cement) as in patch works or whole work including taking down cement plaster complete all as specified and as directed.

M&L for providing 1mm thick wall care putty on wall surface complete all as specified and as directed.

M&L for Rough cast plaster, applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone of size between 6 to 12 mm mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even complete all as specified and as directed.

M&L for preparation of old treated brick surfaces of walls upto by scrubbing with wire brush, hard brush, washing down with water and applying two coats of cement paint, white or tinted over one coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L for Preparation of new rough cast plastered surfaces of wall and applying two coats of cement based paint white or tinted, complete all as specified and as directed.

M & L for preparation of new surfaces plastered of wall two coats of distempering walls with distemper oil emulsion, white or tinted over a coat of primer complete all as specified and as directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement based paint white or tinted, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coat of white wash on ceiling surface complete all as specified and as directed.

M&L for preparing surface of wall and applying two coat of oil bound distemper complete all as specified and as directed.

M&L for brushing neat cement slurry with 3.Kg of cement per sqm complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding/kerb, mud slopes, rounded or chamfered edge complete all as specified and as directed.

M&L for rendering 10mm thick cement mortar 1:4 on fair face of brick work or concrete surface complete all as specified and as directed.

M&L for water proofing treatment to roof surface with APP water proofing membrane 3mm thick & weighing not less than 3.0 kg/sqm of approved make black finish & reinforced with non woven polyester matt of min 150 gm/sqm laid over a coat of bitumen primer conforming to IS-3384 @ 0.4 Ltr/sqm over prepared roof surfaces, forcing overlap with a propane or a butane gas torch with a overlap of 100mm at sides & 100mm at ends & sealing as per manufacturer's instructions including two coat (i.e 0.2 ltr/Sqm) of aluminium paint entaire treated surface. Note :- 1. Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only. 2. Bitumen primer, bitumen and membrane shall be of same make/manufacturer.

M&L for Chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting scrubbing down concrete surface with wire brushes, cleaning with water, allowed to dry and applying a layer of antirust and then Zinc rich epoxy primer all as specified followed by a layer of bonding coat & then guniting over steel welded mesh 2mm dia of wire and aperture 75mm total thickness of guniting not exc 40mm thick (average thickness) with cement mortar 1:2 using OPC 43 grade cement and finally applying cement plaster over guniting surface of required thickness to give even, uniform, and smooth finish conforming to proper geometrics in cement mortar 1:3 to match with the existing surface as in sides and soffits etc. slabs, Chajjas, fins, facias, parapets, beams and columns etc complete including necessary scaffolding, shuttering, necessary chases to brickwork or RCC members at any height up to 4 storey building complete all as directed. Note: Steel Welded mesh is to be welded with existing reinforcement. The Cost of welded mesh is deemed to be included in the unit rate quoted and the work to be carried out up to 4 storey bldgs/in floor roofs complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for fdn etc for soft manhole not exceeding 10 sqm on plan and getting out any type of soil complete all as specified and as directed.

Returning filling in soft/loose soil incl spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removing of surplus soil to exc 250 mtr but n.exc 500 mtr and deposited where directed as a level n.exc 1.5 mtr above the starting point complte all as specified.

Demolition and breaking of 150 mm dia sewage/drain pipe (salt glazed where AC or reinforced concrete) set in cement mortar complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 ,bed concrete to 150mm bore dia drain pipes (of 100mm thick) including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L for 150mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed.

M&L for 75mm thick SFRC manhole/drain cover size not exc 1.00 sqm each set and jonted in cement mortar 1:4 complete all as specified and as directed.

S&F 1000 Ltr rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position including necessary fittings after dismantling of old tank complete all as specified and as directed.

Taking up or down 15mm bore dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

M&L for 20 mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and as directed.

M&L for 25mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and as directed.

S&F in repair Chromium plated brass long body bib tap fancy type 15 mm bore dia complete all as specified and as directed.

S&F in repair 15mm bore angle valves, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle, complete all as specified and as directed.

S&F Grating doom 100mm dia of SS (Minimum weight 25gms) complete all as specified and as directed.

S&F Grating doom 125 mm dia with waste hole of SS. (Minimum weight 40gms) complete all as specified and as directed.

S&F in repair PVC connection 15mm size with PTMT nuts complete length 600mm complete all as specified and as directed.

S&F in repair flexible PVC waste pipe with coupler complete 900mm length complete all as specified and as directed.

S&F in repair chromium plated stanless steel curtain rod 25mm bore fixed with fixing brackets,stops, rollers etc complete all as specified and as directed.

S&F for drapery rod's side bulb stainless steel chromium plated suitable for 25mm bore curtain rod complete all as specified and as directed.

S&F in repair coated MS drapery rod's brackets as required complete all as specified and directed complete all as specified and as directed.

S & F of box type steel window with side hung shutters including box type hinges with steel handle, hold fast and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

All as per ssrl item No 68.00 here-in-before but without glazing bars.

M&L for mild steel work with square/rectangular section in post, Roof trusses (framed), trussed, purlins, rafter, crane gantries, wind ties, rails and fastenings and heavy bracket, framing of tube sections including distance pieces, cleats, MS plates, nut & bolts etc complete all as specified and as directed.

S&F of Pre-painted galvalume aluminium zinc coating (150 GSM) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint over one coat of red oxide Zink chrome complete all as specified and as directed.

M&L for RCC 1:2:4 nominal mix using 20mm graded stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finish surface complete all as specified and as directed.

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, incvluding cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S & F stack clamp made of 50 mm X 5 mm flat iron and 16 mm dia round iron stay including nut bolts and securing ends of stay to wall or roof suitable for 110 mm bore pipe complete all as specified and as directed.

S&F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

M & L in repairs for Gun-metal, globe or gate valves, with iron wheel head, screwd both end sor iron pipe and fixed 20 mm dia complete all as specified and as directed.

S&F sink made of stainless steel 1mm thick for kitchen with plugs, washers and waste including bedding in cement mortar to dwarf wall or uncluding fixing cantilever breckets and connecting union to pipe over all size 495 x 420 mm, bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Surface excavation n exc 30cm deep and averaging 15cm deep including getting out in hard/dense soil complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking glossy paver block any sahpe and size confirming to IS15658-2006 of 60mm thickness, M-35 grade set and jointed with white cement and pigment complete all as specified and as directed.

M&L for solid WPC (Wood Polimer Composite) sheet 18mm thick (water proof and termite proof) prelaminated one side with decorative choice colour and other side balancing white as in cup board shutter. The sheet shall be finished all edges with 0.5mm beading/ lipping of same lamination pvc sheet pasting or bonding tape etc complete all as per manufacture's instruction, specification complete all as specified and as directed.

S&F in repair 40 mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F for 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished same as existing model for almirah and cup board complete all as specified and as directed.

M&L for concealed point wiring with PVC FRLS insulared multi stranded unsheathed cable 2.5 sqmm size with stranded copper conductor, 1100 volts grade conforming to IS:- 694 drawn in and including concealed PVC rigid conduits 20 mm dia incl cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed with concealed sunk in pressed steel terminal boxes of 1.6mm thick factory made and painted with stove enameled black paint incl with 2x2.5 Sqmm & 1x2.5 Sqmm cable for earth connection for 3 pin socket outlet 15/16 amps independent board complete all as specified and directed: - (Note:- Cost of chiseling cutting of existing surface and making goods to match with existing shall be deemed to be included in quoted rates colour code to be followed) complete all as specified and as directed.

S&F of Hot water storage(Geyser)25 Ltrs capacity, BEE 5 star rated,vertical type with suitable size of fastner and incl provision and connecting up of ss braided pipe with adopter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode, having adjustable knob for temperature control and inner tank material of superior glass lined tank with standing capacity upto 8 bar presuure, having heating element 2 KW, complete all as specified and as directed.

S&F bib taps 15 mm fancy type with crutch or butterfly handle, screwed down screwed for GI pipe complete all as specified and as directed.

S&F stop valve 15 mm fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for GI pipe complete all as specified and as directed..

S&F GI tubing pipes galvanized medium class supplied and laid complete including fittings 15mm bore complete all as specified and as directed.

Cutting of existing water supply main any size upto 25 mm for taking branch connection of size 15 mm incl insertion of Tee unegual all as required at site complete all as specified and as directed.

S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and as directed.

M&L for modular AC Box with 20A SP mini MCB, Plastic enclosure & unbreakable Heavy Duty ISI mark Plug Top complete set dully concealed in wall complete all as specified and as directed.

L G BUILDERS (BID ID -3124224)

Keshav Brothers (BID ID -3125496)

MINHAS CONSTRUCTIONS (BID ID -3124812)

M/s Verma and Co (BID ID -3120200)

M/S Rohit Enterprises (BID ID -3125087)

MAA SANTOSHI ENTERPRISES (BID ID -3124880)

M/s M M BAHL (BID ID -3125368)