PROVISION OF ROOF WATER PROOFING AT INHS PATANJALI AND DUTY REST ROOM AT AMBE KODAR INS KADAMBA AT NAVAL BASE KARWAR

Amount

M & L for surface dressing not exc 15cm deep in hard/dense soil complete all as specified and as directed by Engr-in-Charge.

Excavation in trenches n exc 1.5m wide and n exc 1.5m depth for foundation and getting out in hard/ dense soil complete all as specified and as directed by Engr-in-Charge.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and as directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed.

M & L plain cement conocrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation & filling in mass concrete complete all as specified and as directed by Engr-in-Charge.

M & L precast cement concrete block type C1 1:3:6 masonry with solid blocks exc 10cm in width using 20mm graded aggregate and setting in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

M & L for providing 75mm thick cement concrete type C-2 1:3:6 using 40mm graded aggregates as in plinth protection/ hard standing finished even and fair complete all as specified and as directed.

M& L for filling under floor with moorum/ red bajri in floor laid in layers not exc 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M & L for hardcore of broken stone or boulders of gauge not exc 63mm and deposited spread and levelled in layers not exc 15cm thick watered and rammed to a true surface complete all as specified and as directed.

M & L for rendering 15mm thick in CM 1:4 on fair faces of brick/ stone work or block masonry/ concrete surfaces on roof top using water proofing compound finished fair and smooth (without using extra cement) complete all as specified and as directed.

M & L for rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L for reinforcement cement concrete type A0, 1:1.5:3 using 12.5mm graded aggregate nominal mix in chajjas, shelves and similar works complete all as specified and as directed.

S & F mild steel bars 6mm to 8mm dia & above, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire complete all as specified and as directed.

S & F mild steel TMT bars 10mm dia & above, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire complete all as specified and as directed.

M & L for formwork to soffits and suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick ( Horizontal or sloping) fair finished complete all as specified and as directed.

S & F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410W Gde E-250 quality A complete all as specified and as directed.

M & L for PCC 1:2:4, type B-1, using 20mm graded aggregate as in coping, weathering slightly rounded or champhered angles etc including use of necessary form work complete all as specified and as directed.

M & L for non skid ceramic coloured tiles 7 to 8mm thick ( square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and smooth complete all as specified and as directed.

M & L glazed ceramic coloured tiles in vertical surfaces as in skirting/ dado of size 300 X 200 X 7mm thick or as per size of floor tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick CM 1:4 complete all as specified and as directed.

S & F solid PVC doorframe of size 50mm X 47mm made out of 5mm single side prelam PVC sheet/wood grain printed PVC sheet reinforced with MS tube complete all as specified and as directed.

S & F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design 2mm thick/moulded prelam PVC sheet/ 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on the back face complete all as specified and as directed.

S & F powder coated anodised aluminium frame for doors/windows, ventilators and partition works with one or more rebates including joining cleats for fixing etc complete all as specified and as directed.

S & F aluminium alloy powder coated of any colour ( thickness of powder coating not less than 50 micron) window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S & F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium staples all as specified and as directed.

M & L for MS framed work such as grills and similar works conforming to Fe-290 E-165 all as specified and as directed.

S & F 5.5 mm thick sheet glass, ordinary quality and glazing with rubber gasket in square exc 0.5 sqm in each pane complete all as specified and as directed.

M & L for 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded aggregate as in sub base for floors complete all as specified and as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength og 550 MPa as in roof covering with ridge fixed with shelf tapping screws complete all as specified and as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength og 550 MPa as in roof covering with ridge fixed with shelf tapping screws complete all as specified and as directed.

S & F exposed metal frame ceiling with calcium silicate board 8mm thick of silicious and calcareous material reinforced with cellulose fiber for fixing in 600mm X 600mm grid complete all as specified and as directed.

S & F anodised aluminium snap grid frame work for false ceiling Tee of size 24 X 28.5mm made out of PGI sheet 3mm thick double at web and single at flange, flange covered with powder coated sheet 0.25mm thick and wall angle 24 X 24 X 0.45mm powder coated for ceiling complete all as specified and as directed.

S & F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3mm size 60mm long complete all as specified and as directed.

M & L for precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in cover slabs set in CM 1:4 including necessary form work complete all as specified and as directed.

S & F 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S & F Wash basins white colour, flat back of size 550 X 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets, flush pipe, cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed. MAKE: Hindware (italian collection) Cat No 10091 & 11003 or equivalent as approved.

S & F 10 Ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S & F bib taps, cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm bore complete all as specified and as directed. MAKE: Hilife/ESS/Czar or equivalent as approved.

S & F Pillar taps 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F 15mm dia, 450mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and as directed.

S & F chromium plated angle stop valves of 15mm bore, with adjustable wall flange complete all as specified and as directed. MAKE : Hilife/ESS/Czar or equivalent as approved.

S & F tubes 15mm dia medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S & F tubes 20mm dia medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S & F 75mm dia PVC SWR nahani trap plain, with grating including setting and jointing with solvent cement complete all as specified and as directed.

S & F vitreous china pedastal pattern water closet including pipe, cistern & seat cover complete all as specified and as directed.

S & F vitreous china squattinf pan (Orissa pattern) of size 580 X 440mm, white with integral foot rests, any pattern including provision of cement concrete bedding (excluding flushing cistern and flush pipe) with 'S' or 'P' trap complete all as specified and as directed.

S & F curtain rails anodised aluminium alloy fixed with brackets, stops and rollers complete all as specified and as directed.

S & F towel rail 600mm long 20mm dia of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats ( minimum weight 190 gms) complete all as specified and as directed.

S & F gun metal, globe or gate valve 15mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

M & L for preparation of new plastered surfaces on wall surfaces and applying two coats of weather proof exterior emulsion paint over a coat of self primer complete all as specified and as directed.

M & L for preparation of new or previously untreated steel surfaces of any description exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide zinc chrome primer complete all as specified and as directed.

M & L for preparation of new plastered surfaces on wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M & L for salt glazed stone ware drain pipes laid in trenches and jointed as specified of 150mm internal dia of pipe complete all as specified and as directed.

M & L for PCC 1:3:6 type C-2 using 40mm graded aggregate as in packing under and haunching against sides of pipe or as required at site after the pipes are laid over the existing bed and tested for 150mm bore of pipe complete all as specified and as directed.

M & L for cutting into existing manholes for connecting new drains, making good to walling and rendering, cutting out branch channel and making good benching for and forming branch channel (1/2 round 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150mm dia pipe complete all as specified and as directed.

Dismantling/ taking out existing hessian base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing the dismantled debris to a distance exc 200m complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for water proofing treatment by applying oil bound bitumen primer, having a density of 0.87-0.89 Kg/Lit, at the rate of 0.40 Ltr/Sqm, providing and laying 4mm thick APP modified water proofing membrane weighing not less than 4 Kg/Sqm of approved make including minimum 10cm side end lap, laid and pasted with blue flame torching applications and finally finishing with solar reflective bituminous aluminium paint at the rate of 0.10 Kg/Sqm complete all as specified and as directed.

Supply only water proofing compound complete all as specified and as directed.

M & L for cracks by cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

M & L for applying two coats of water proofing coating system by applying Shalicryl-215 of STP Ltd/ Rain coat 601 of DR Fixit/ Barrier coat of Araldite over a coat respective primer including preparation of plastered surface by complete removal of existing treatment including filling of crack with respective crack filler all as per manufacturer's instructions complete all as specified and as directed.

M & L for rendering 10mm thick in CM 1:6 on concrete surfaces of walls finished even and smooth (without using extra cement) complete all as specified and as directed.

M & L for surface point wiring 1100 Volts grade 1.5 Sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS: 694-1990 with ISI marking including PVC casing & capping medium grade with all accessories in wall/ceiling/floor/roof etc, sunk pressed steel or cast iron terminal boxes with 3mm plastic laminated sheet top cover including 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multistranded copper conductor conforming to IS: 694-1990 with ISI marking as continuous earth wire connected to common earth dolly complete all as specified and as directed.

(a) One light/fan point controlled by one switch

(b) One 3 pin socket outlet 5 Amps on same board with other switches

All as per item No 63 herein above but with 4Sqmm cable for15 Amp socket on independent board.

S & F in repairs switch piano 5 Amps one way flush type matchnig with exixting make, ISI marked all as specified and as directed.

S & F switch socket outlet 3 pin 15 Amp flush type multipurpose, ISI marked all as specified and as directed.

S & F in repairs ceiling rose surface bakelite 65X50mm three terminal complete all as specified and as directed.

S & F 5 star rated ceiling fan 1200mm sweep including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/0.0076 and testing complete all as specified and as directed. MAKE: Crompton Greaves/Bajaj/Usha

S & F ceiling fan regulator electrnic step type 230 V single phase complete all as specified and as directed.

S & F exhaust fan of size 300mm sweep, metal body including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/0.0076 and testing surface/wall cutting, preparation and finishing complete all as specified and as directed.

S & F DB SPN 8 way complete all as specified and as directed.

S & F DB SPN 32 Amp complete all as specified and as directed.

S & F MCB SP, 5 to 30 Amps, 230 Volts, single phase, 10KA capacity complete all as specified and as directed.

S & F LED 36 W recess mounting luminaire with white powder coated CRCA housing with each LEDs, seamless front frame with flat white high transmission acrylic cover complete all as specified and as directed. MAKE: Bajaj Cat No. BZRSQL 36W GZ WH or equivalent in Havells/ CG/ Phillips.

S & F lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings each complete all as specified and as directed.

S & F LED bulkhead 10W complete all as specified and as directed. MAKE: Bajaj Cat No BIBWP 10W LED or equivalent in Havells/ CG/ Phillips

M&L earthing complete with galvanized steel earth plate electrode 600 X 600 X 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized steel wire 4 mm dia by means of nuts, bolts, checknuts and washers of galvanized iron or steel as shown in electrical plate No 3 connected to earthing test point including testing on completion and including excavation and earth work, GI pipe light grade 15mm bore for protection of GI wire from earth electrode and including the earth test point of GI/ steel of size 75 X 75 X 25mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B-1 chamber and MS angle iron frame 40 X 40 X 3mm and RCC cover 40mm thick reinforced with 6mm dia round bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh 20mm dia GI pipe light grade for watering all as shown in electrical plate No. 3 of SSR Part-I 2009 and connected to earth test point including testing complete all as specified and directed.

Supply only cable XLPE insulated screened PVC bedded galvanised steel strip wire armoured electric power cable(heavy duty) 1100V grade with stranded aluminium conductor of size 16 Sqmm 2 core complete all as specified and directed.

Supply and laying unreinforced preacast concrete cable cover class LV type I flat size 250 X 150 X 40mm complete all as specified and directed.

Supply and spreading dry river sand in trench for cable cushioning complete all as specified and directed.

M & L for GI pipe light grade 50mm dia for protection of LT cable under road/ tarmac all as specified and as directed.

S M Shetty

Bidder Name

K.G.SHANKER

S M Shetty