Renovation of ground floor of building at Irrigation colony, Nandanpura, Jhansi for Division office, Ken-Betwa Link Canal Construction Division -1 Jhansi

Jungle clearance from cutting heavy growth and bushes upto 7.5 cm diameter including removal of roots with collection and removal.

Dismantling Reinfroced cement concrete work manually /mechanical means including stacking of steel bars and disposal of unserviseable material within 50 meters lead as per direction of Engineer in charge.

Dismantling existing plaster including disposal/stacking of refuse as directed by Engineer in Charge within a disance of 60 meter.

Dismantling cement concrete and brick or granolithic floor, including base concrete and including material within a distance of 60 m.

Excavation of foundation in Mar, Rankar and kankar mixed soils including lift upto 1.5 meter and lead upto 30 meter including filling, watering, ramming of excavated earth into the trenches or upto the space and sides of the foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer in Charge upto a distance of 30 meter from the foundation trenches.

Chipping of unsound weak concrete 25 mm average thickness material from slab, Ceiling, beams, columns etc. with manual chisel and/or by standing power driven percussion or of approved make including tempering of all edges, making square shoulder of cavities including cleaning of exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all leads and lifts all complete as per direction of Engineer in Charge.

Cleaning of reinforcement from rust from the reinforcing bars in Ceiling to give it a total rust free steel surface by using alkaline chemical rust removal of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and throughly washing with water and following it to dry. all complete as per direction of Engineer in Charge.

Repair to plaster in Ceiling of thickness 12mm to 20mm (1:2 1Cement and 2fine sand) in patches of area 2.5 sqm (after fixing Chicken wire mesh)and under including cutting the patch in proper shape, raking outjoints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground all complete as per direction of engineer in charge.

Dismantling of bricks or stone masonry in lime or cement mortar including stacking.

Dismantling doors and windows, chowkhats with hold fast and including stacking of dismantled materials as directed by engineer in charge within a distance of 60mt.

Making the opening in brick masonry including dismantling in floors or walls by cutting masonry and making good the damages to walls, flooring and jabs complete, to match the existing surface including disposal of malba/rubbish to the nearest muncipal dumping ground, all complete as per direction of Engineeer in Charge.

Disposal of building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting unloading to approved mincipal dumping ground or as approved by engineer in charge, beyond 50m initial lead, for all leads including all lifts involved.

Cement concrete flooring 1:2:4 mix, laid in one layer finished with floating cost of neat cement(40mm thick).

First class brick work in cement mortar 1:4 using 1st class building bricks i/e all cost of material, labour, T&P etc. As per direction of engineer in charge for proper completion of work.

Brick work using Old bricks (6o% of volume found as brick from dismantling in item no 9) in cement mortar 1:4 using 1st class building bricks i/e all cost of material, labour, T&P etc. As per direction of engineer in charge for proper completion of work.

Centering and shuttering for RCC work including cost of material, T&P for proper completion of work as per direction of engineer in charge.

Providing and fixing of Reinforcement for RCC work including cost of material, T&P for proper completion of work as per direction of engineer in charge.

Providing and laying Reinforced Cement concrete M-15 (1:2:4) with ramming, curing, finishing of top surface and including cost of material, T&P for proper completion of work as per direction of engineer in charge.

Providing and fixing Mild steel or Iron work in Heavy sizes such as trusses; builtup gats, door frames, record racks roof works, glites etc. for roof support, lintel, beam etc. wrought to required from including drilling holes; rivetting or welding where necessary , and also including supply of steel, bolts, nuts etc. & their fixing required for proper completion of the work as per direction of engineer in charge.

Providing and injecting chemical for post Constructional ant termite treatment with drilling holes at junction of floor with walls & pillars, the application of chemicals shall be as per relevant I.S. code and the rate of application of chemical shall be as provided in the IS 6313 part III, including quartely inspection and providing required treatment for one year As per direction of E/I.

Supply and fixing of a chaukhat made of 35x35x6mm iron angle door, window, ventilation frame including drilling holes: welding where necessary and also including supply of steel bolts, nuts etc. & their fixing required for proper completion of work.

Providing and fixing 35 mm thick ISI marked flush door shutters including ISI marked stainless steel butt hinges with necessary screws, confirming to IS:2202(Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well amtched teak 3 ply veneering with vertical grains or cross bands and face veeeners on both faces of shutters.

Fixing chaukhat (obtained in item no 10) in existing opening including embedding chowkhats in floor or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete block of size 15x10x10 cm with cement concrete 1:3:6 alonwith Painting two coat of approved zinc oxide to both sides of chowkhats and making good the damages to walls and floors as required complete, including disposal or rubbish to the dumping ground, all complete as per direction of engineer in charge.

Providing and laying of 12.5mm Thick plaster 1:4 cement mortar on walls i/e mixing, curing, with all cost of material , labour, T&P etc as per direction of engineer in charge.

Fixing panes of glass 3.8 to 4.7mm thk with equal or equivalent I.S.I. marked quality putty, brads and springs and including supply of all materials and labour etc. complete.

Supply and fixing of 4.5 cm (1 3/4") thick Indian Sal wood part panelled & part glazed door, window and Ventilation shutters including supply and fixing of wooden cleats and stops and including fixing and adjustments of hinges, bolts, locks, handles, springs, and/or other fittings but excluding their supply and including painting with 2 coats of Black japan an all iron fittings if necessary & including supply & fixing the glass panes 3.8 to 4.7 mm thickwith putty & brad with necessary fitting.

Supply and fixing following ISI marked Door Fittings including screws bolts and nails. as per essential requirements. 16 mm dia 200 mm long Aluminium Al-drop

Supply and fixing following ISI marked Door Fittings including screws bolts and nails. as per essential requirements. Aluminium Door Stopper

Supply and fixing following ISI marked Door Fittings including screws bolts and nails. as per essential requirements. 10 mm dia 150 mm Long Aluminium Handle

Supply and fixing following ISI marked Door Fittings including screws bolts and nails. as per essential requirements. 10 mm dia 200 mm long Aluminum tower bolts with sliding bolts, nut & bolt etc

Supply and fixing following ISI marked Window Fittings including screws bolts and nails. as per essential requirements. 10 mm dia 150 mm Long Aluminium Handle

Supply and fixing following ISI marked Window Fittings including screws bolts and nails. as per essential requirements. 10 mm dia 200 mm Long Aluminium Tower Bolt with sliding bolt

Supply and fixing following ISI marked Window Fittings including screws bolts and nails. as per essential requirements. Iron Hinges with 75 mm long with nut & bolt

Supply and fixing following ISI marked Ventilation Fittings including screws bolts and nails. as per essential requirements. 10 mm dia 100 mm long Aluminium Handles

Supply and fixing following ISI marked Ventilation Fittings including screws bolts and nails. as per essential requirements. 16 mm dia 200 mm long Aluminium Sliding Bolt

Supply and fixing following ISI marked Ventilation Fittings including screws bolts and nails. as per essential requirements. Iron Hinges 100 mm long with nut & bolt

Supply and fixing China white Glazed Tiles in flooring, walls or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labour and tools etc, required for proper completion of the work.

Providing and laying Kota stone slab 20mm thick on kitchen platform laid on 10mm thick cement mortar 1:3 (1 cement: 3 coarse sand) jointed with grey cement slurry mixed with pigment to match the shade of slabs including rubbing, rendering and polishing complete.

Providing and fixing 610x460 mm bowl depth 200 mm stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with CI brackets and stainless steel plug 40mm and 40 mm flexible PVC waste pipe, including painting, all fittings and brackets, cutting and making good the walls wherever required.

Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes 25mm dia having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipes with clamps at 1.0 m spacing, This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes 20 mm dia having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipes with clamps at 1.0 m spacing, This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes 15 mm dia having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipes with clamps at 1.0 m spacing, concealed work including cutting and chases and making good the wallscetc. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

Providing and fixing white vitreous china pedestal type water closet(Europian type W.C. pan) with white solid seat and lid, 8 mm dia CP/SS jet with flexible tube 1 m long with SS triangular plate, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device(handle lever), confirming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.

Providing and fixing White vitreous China wash basin size 630x450 mm with 15 mm brass pillar tap, 32 mm C.P. brass waste of standard pattern, 32 mm flexible PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever require.

Providing and fitting CP Bib cock 15 mm dia, 400 gm of heavy quality including supply of all materials, labour , t&P for proper completion of work

Providing and fixing 15 mm dia, 450 mm PVC connection pipe heavy quality with brass unions including supply of all materials, labour , t&P for proper completion of work

Providing and fixing 100x100 mm C.I. jali round of approved quality and colour.

Supply and installation of low density polyrthylene seam less one piece moulded tank and placing the same in proper position including all taxes labour and T&P etcfor proper completion of work , Tank should be ISI marked(for 500 Ltr).

Supply and fixing of 100mm dia PVC down pipe complete with rose head bends M.S. clamps 2.5 cm x3 fixed to walls/ground by 15 cm long 6 mm dia nail and including repair of plaster pointing etc. if damaged during fixing of the pipes including cost of all material labour, tools and plants etc required for proper completeion of work.

Supply and fixing of CP brass towel rail 750x20mm together with pair of CP brass brackets to fit the rail.

Supply and fixing of Indian Bewelled edge mirror 600x450 mm.

Supply and fixing 100 mm dia C.P. brass shower of 100 gm heavy quality with 15-20 mm inlet

Supply and fixing 25 mm dia Fullway Gate Valve. Including supply of all materials T&P etc. for proper completion of the work.

Laying of 40mm guage brick ballast (20% of volume found as brick from dismantling in item no 9) under pavement.

Providing and laying 80mm interlocking concrete block pavement laid in stone dust base and fill joint with fine sand. Joint filled after labeling and dressing base including supply of all material, labour, T&P etc required for proper completion of the work.

Providing and fixing powder coated aluminium(minimum thickness of powder coating 50 micron) work for partition walls with extruded built up standard tubular sections/appropriate Z section and other sections of approved make confirming to IS:733 and IS:1285, fixing with dash fastners of required dia and size, including necessary filling up the gaps at junction, ie at top , bottom and sides with required EDPM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, CP brass/ stainless steel screws, all complete as per architectural drawings and the direction of Engineer-in Charge.

Painting of all exterior surface wall with 1 coat of primer and 2 coats of Acrylic Smooth Exterior Paint includind scrapping as required to give even shade i/e cost of all material, labour, and T&P etc.

Painting of newly plastered interior surface walls with 1 coats of Primer and Two coats of oil distemper paint to give even shade i/e cost of all material, labour, and T&P etc.

Painting of old distempered interior surface walls with 1 coats of Primer and Two coats of oil distemper paint after scraping surface to give even shade i/e cost of all material, labour, and T&P etc.

Painting or varnishing on iron works in small area or new wood work with one coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the ISI No. 103 1950.

Painting or varnishing on previously painted old iron or wood works in small area or new wood work with one coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the ISI No. 103 1950.

Wiring for Group B Light point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Wiring for light/power plug/circuit submain with 2x4 sq.mm FRLS/HFFR PVC insulated copper medium class PVC conduit along with 1 No.4 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing suitable GI box with modular plate and cover in front on surface or in recess, including providing and fixing. 6 pin 5/6 & 15/16A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25A modular socket outlet and 25A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of (18-22 watt) following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficien>85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temprange -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.=0.95, IP20, CRI >80,Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K/ 5700°K/6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy =105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures asper BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).

Supply, Installation, Testing and Commissioning of ceiling fan 1200mm, service value >= 6.0 CM/Min/Watt, air delivery 210 CM/Min(Minimum) with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal ( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req.

Providing and laying APP(Atactic Polypropylene Polymer modified prefabricated 5 layer, 3 mm thk water proofing membrance, black finished reinforced with glass fibre matt consisting of a coat of bitumin primer for bitumen membrance @0.40 litre/Sqm by the same membrance manufactured of density at 25'C, 0.87 to 0.89 kg/litre and viscocity 70-160cps, Over the primer coat the layer of membrance shall be laid using butane torch and sealing all joints etc. and preparing the surface complete. as per direction of Engineer in Charge.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable upto 35 Sq.mm (clamped with 1mm thk saddle) from outdoor source to building of 1.1 KV grade of following size on wall surface as required alongwith all connections in complete.

Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing plain 16/0.20mm (0.50sqmm) twin circular flexible FLRS/HFFR PVC insulated, PVC sheathed copper conductor cable direct on the wall with PVC clips etc. as required.

Supply and fixing 16 way, double door, single pole and neutral, sheet steel, MCB distribution board, 240V on surface/ recess, complete with tinned copper BUS bar, neutral BUS bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.

Supply and fixing 5A to 32A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of single pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supply and fixing 63 A double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and fixing 100 mm dia PVC pipe including all fitings, bends, traps as required for soil/waste pipe

Supply and fixing 20 mm dia Fullway Gate Valve. Including supply of all materials T&P etc. for proper completion of the work.

Providing and fitting CP Stop cock 15 mm dia, 200 gm of heavy quality including supply of all materials, labour , t&P for proper completion of work

Providing and fitting 25 mm dia PVC Float Ball Valve with brass and union complete including supply of all materials, labour , t&P for proper completion of work

Providing and laying of 8 to 10mm thk ivory or light shade Vitrified tiles of 600mm x 600mm size in flooring or skirting laid in 1:3 cement mortar (1 cement : 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T&P required for propoer completion of work.

Supply and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction cofficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6&7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level on the existing frame work consisting of T - sections and L sections suitably fixed according to tile size as per direction of Engineer-in-Charge.