Landscape/Beautification of Retrieved land adjoining Bahu Fort by way of civil works viz Landscape, construction of walkway, fencing and construction of Langer shed etc. (Balance Work)

Amount

Supplying and stacking of good earth at site including royalty and carriage complete (earth measured in stacks will be reduced by 20% for payment)

Supplying and stacking of well decayed cow dung manureat site including royalty (cowdung measured in stacks will be reduced by 8% for payment)

Mixing earth and sludge or manure in proportion specified or directed by officer in charge.

Fine dressing of the ground

Flooding the ground with water including making kiaries and dismantling the same

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of Soil

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) Crushed

Dry stone pitching 22.5 Cm thick including supply of stones and preparing surface complete

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Raj Nager plain white marble/udhaypuri green marble/zebra black marble (Area of slab over 0.5 sqm). 18mm thick

Extra for providing edge moulding to 18 mm thick marble stone counters, Vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble Work

Centnng and shuttering including strutting~ propping etc and removal of form work for. Foundations footings. bases of columns

Providing and fixing gun metal cramps 25x6mm, 30cm long as per design in cement mortar 1:2 ( 1 cement : 2 fine sand) including making necessary chases.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead: 1:3:6 or richer mix

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and upto 40mm.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:5:10 (1 cement: 5 coarse sand :10 graded stone aggregate 40mm nominal size) Crushed

40mm thick fine dressed stone flooring over 20mm (average) thick base with joints finished flush of 1:5 ( 1 cement 5 coarse sand) : Red sand stone

DemoIish ing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : In cement mortar

Dry random rubble masonry with hard stone in foundation and plinth: Using nallah stone without bond stone

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:1.5:3 (1 Cement: 1.5 Coarse sand: 3 graded stone aggregate 20mm nominal size) Crushed

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) Crushed

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shape (Area of slab over 0.5 sqm) 18mm thick

Mirror polishing on marble work/stone work where ever required to give high gloss finish complete.

Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete. Hot finished welded type tubes

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineerin-Charge)0.50mm+/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washers filled with white lead complete upto any pitch in horizontal /vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+/- 5 %) total coated thickness(TCT), Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated Jor L hooks, bolts and nuts and GI:Seam bolts, and nuts,GI plain and bitumen washers complete: Gutter .(600 mm over all girth)

Removing mortar from stones and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured)

Extra for every additional lift of 1.5 mtr. or part thereof in: All kinds of soil

Providing and laying damp-proof course 5Crnm thick with cement concrete 1:2:4 (1 cement : 2 co.:Hse sand 4 graded stone aggregate 20mm nominal size: Crushed

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diameter

Extra for providing edge moulding to 18 mm thick marble stone counters, Vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer incharge (cost of sludge, dump manure or/and good earth to be paid seperately)

Stone work (machine cut edges) for wall lining etc. (veneer work)upto 10 m height, backing filled with a grout of 12 mm thick cement mortar 1:3 ( 1 cement: 3 coarse sand) including pointing in white cement 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps which shall be paid for separately): Red sand stone- exposed face fine dressed with rough backing 40mm thick

Ashok Kumar Gupta

VIKAS MAHAJAN