PROVISION OF GI SHEETS FOR COVERING DAMAGED COMPOUND WALL AT INS UTKROSH AND OTHER MINOR AND REVENUE WORKS UNDER GE MINNIEBAY PORTBLAIR

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out as in soft/lose soil complete all as specified and as directed by Engineer in charge

Excavation post holes (or similar holes) each not exceeding 0.5 cum getting out in soft / lose soil returnig filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering and removing surplus soil to a distance not exceeding 50m and making good surfaces complete all as specified and as directed Engineer in charge

Exavation in post holes in hard/ dence soil not exc. 0.5 cum and removing surplus soil to a distance not exc 50 mtr and making good the surface complete all as specified and as directed Engineer in charge

M&L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer in charge

M&L for plain cement concrete type C2 1:3:6 (using 40mm graded granite stone aggregate) in foundation filing and mass concrete complete all as specified and as directed by Engineer in charge

M & L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.con- forming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer in charge

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction complete all as specified and as directed by Engineer in charge

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip, and straight flashing, roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer in charge

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer in charge

S & F Aluminium flat , wind ties of any size fixed with self tapping screws of size 40/50mm with integral EPDM washer screwed in roof covering, including all necessary drilling, bolting or riveting etc., and similar work complete all as specified and as directed by Engineer in charge

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-W (Gde E250) quality-A complete all as specified and as directed by Engineer in charge

S&F Mild steel rag or lewis bolts, dia of necks is 12mm screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n.exc 15cm long complete all as specified and as directed by Engineer in charge

M & L for Preparation of New or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of yellow zincprimer complete all as specified and as directed by Engineer in charge

M&L for precast cement concrete block masonary with solid blocks type C1 1:3:6 using 20mm graded aggregate exc 10cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engineer in charge

M & L for rendering 15mm thick in 10mm thick cement mortar 1:6 and backing coat of 5mm with cement mortar 1:6 on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed by Engineer in charge Note: Water proofing compound will be measured and paid separately

Supply only integral water proofing compound complete all as specified and as directed by Engineer in charge

M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance \exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer in charge

S&F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and as directed by Engineer in charge

Supply and Fix aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc., including PVC sheet of 5 to 10mm thick of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid complete all as specified and as directed by Engineer in charge Note : Contractor shall submit gurantee for the work executed under this item through guarantee bond in Rs.100/- Non judicial Stamp paper along with 5% Security deposit submitted in the shape of FDR/BGB from Scheduled banks of india.

M&L for 100mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing.even & smoth without using extra cement complete all as specified and as directed by Engineer in charge

M&L for Chequered cement concrete tiles 25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over 20mm thick cement screed in CM 1:6 complete all as specified and as directed by Engineer in charge

Removing excavated material/soil to a distance exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by Engineer in charge

M&L for providing cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in coping, benching, and similar works slightly rounded or chamfered angles and throating including necessary form work complete all as specified and as directed by Engineer in charge

M&L for two coat of synthetic enamel paint over a coat of red oxide and prepration of untreated surface of concrete complete all as specified and as directed by Engineer in charge

S&F Vitreous China ware wash hand basin, white flat back of size 550mmx440mm including 32mm brass chromium plated waste fittings with long screw shanks and fly nuts flange end bedded in red led cement and other end fixed rubber plug with rings including CI Brackets cutting for and pinning in ends of brackets or erecting strand etc including fixing of 20 mm pillar tap complete all as specified and as directed by Engineer in charge Note: 20 mm Pillar tap shall be measured and paid separately as "Supply Only"

S&F 50 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls or laid in floor including necessary fittings, clamps etc complete all as specified and as directed by Engineer in charge

S&F Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing,union and cap and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F Waste pipe 32 mm dia suitable for WHB complete all as specified and as directed by Engineer in charge

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed by Engineer-in-Charge.

Supply only 20 mm dia pillar taps long body, cast copper alloy, chromium plated, fancy type, screwed down,high pressure with long screwed shanks and fly nut complete all as specified and as directed by Engineer in charge

S&F 20 mm dia angle cock/stop cock ,cast copper alloy chromium plated ,fancy type with long shank and cup and fixed complete all as specified and as directed by Engineer in charge

M&L for Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by Engineer in charge

Supply and fixing 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with proper clamping arrangements complete all as specified and as directed by Engineer in charge

S&F CPVC brass threaded elbow 20 mm outer dia complete all as specified and as directed by Engineer in charge

S&F CPVC brass threaded Tee for 25 x 20 mm outer dia complete all as specified and as directed by Engineer in charge

S&F CPVC brass threaded adopter 20 mm outer dia (FTA/MTA) complete all as specified and as directed by Engineer in charge

S&F CPVC union 20 mm outer dia complete all as specified and as directed by Engineer in charge

S&F Ball valves for 20 mm CPVC pipe complete all as specified and as directed by Engineer in charge

RS ENGINEERING WORK

Kathir Marketing Services

SB ENTERPRISE

M/s Ramesh Lal

SKY GROUP

Allied Trading Company

ANITA VARMA ENTERPRISES

MAJUMDAR FURNITURE