Renovation of existing power supply wiring of electrical fixtures in cabins and laboratories of HM division under NHP at CWPRS Pune 24

Supply, installation, testing and commissioning of 100W LED High bay fittings directly on ceiling of height 20 metres, with necessary enclosure & connection (with 1.5 sq mm wire & earthing ) Make: Phillips / Havells / CG/ Polycab / Syska or equivalent (High bay lighting System)

Supply, installation, testing and commissioning of 100W LED Medium bay fittings directly on wall of height 12 metres with necessary enclosure & connection (with 1.5 sq mm wire & earthing ) Make: Phillips / Havells / CG/ Polycab / Syska or equivalent(Medium bay lighting System)

Provision of following items : a) Sunmica board of size 12x18 inch b) 32 Amp DP MCB-1No., 20 A SP MCB-1No. c) 15 Amp & 5 Amp Switch & Socket- 1No. d) Painting & Wiring of Power DB with all necessary accessories in the existing power DB as per instructions by site engineer.

Supply, installation, testing and commissioning of industrial Heavy Duty Air Circulator 18”, 1400 rpm, 230V surface mounting with all necessary accessories and nut bolts etc.Make: Almonard / Havells / CG

Supply of 120 sq.mm 3 ½ core, power underground Cable, of 1.1 KV grade, aluminum Conductor screened XLPE insulated PVC sheathed, steel armored & suitable for earthed system .Confirming to ISI specification. Make:Polycab/Finolex/Jhonson/Havells

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of of 120 sq.mm 3 ½ core, on wall surface as required, (clamped with 25/40x3 mm thick MS flat clamp)

Supplying and making indoor end termination with brass compression gland & aluminium lugs for 120 sq.mm 3 ½ core, of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required.

S / I / T / C of L.T. Power Distribution panel will be Fabricated with 14/16 SWG CRCA sheet and powder coated after Seven Tank process of painting , Panel will be indoor type, dust & vermin proof,mounted on suitable base frame and sutaible to house following switchgears. a)Incomer : 250 Amps,25 KA , 4 pole MCCB – 1 No.With RYB Indicating Lamps. b) Outgoing : i)125 A, 25 KA, 3 P, MCCB -2 Nos. ii) 32 Amps, 10 KA, 2 pole MCB - 12 Nos. Note : All MCCB's should have Extendable Rotary Handle and Sprader sets. Aluminium bus bar rating 250 Amps. to be provided for main Bus-Bar and outgoing MCCB will be connected with suitable rating of Aluminium bus bar. Earthing Bus to be provided throughout Panel and fixed at both end. Control wiring will be done with 1.5 & 2.5 sq.mm copper flexible wires. Sufficient space to be provided for incoming and outgoing cables. Removable Gland Plates and back door to be provided. G A Drawing will be approved form Electrical Section.

S / I / T / C of L.T. Power Distribution panel will be Fabricated with 14/16 SWG CRCA sheet and powder coated after Seven Tank process of painting , Panel will be indoor type, dust & vermin proof,mounted on suitable base frame and sutaible to house following switchgears. a)Incomer : 400 Amps,36 KA , 4 pole MCCB – 1 No.With RYB Indicating Lamps, Ammeter,CT's, Voltmeter and KWH meter. OR Multifunction meter. b) Outgoing : i) 250 A, 25 KA, 3 P, MCCB -2 Nos. ii) 125Amps, 25 KA, 3 pole MCCB- 2 Nos. iii) 63 Amps,10 KA, 4 pole MCB - 4 Nos. iv) 32 Amps, 10 KA, 2 pole MCB - 4 Nos. Note : All MCCB's should have Extendable Rotary Handle and Sprader sets. Aluminium bus bar rating 400 Amps. to be provided for main Bus-Bar and outgoing MCCB will be connected with suitable rating of Aluminium bus bar. Earthing Bus to be provided throughout Panel and fixed at both end. Control wiring will be done with 1.5 & 2.5 sq.mm copper flexible wires. Sufficient space to be provided for incoming and outgoing cables. Removable Gland Plates and back door to be provided. G A Drawing will be approved form Electrical Section.

Supply of one number PVC insulated PVC sheathed / XLPE power cable of 1.1 KV grade 2 core 1.5 sq.mm. Copper armored Cable.. Make:Polycab/Finolex/ Jhonson/Havells

Laying and fixing of one number PVC insulated PVC sheathed / XLPE power cable of 1.1 KV grade 2 core 1.5 sq.mm. Copper armored Cable. Make:Polycab/Finolex/ Jhonson/Havells

Supplying and making indoor end termination with brass compression gland & aluminium lugs for 2 x 1.5 sq.mm of PVC insulated and PVC sheathed/XLPE Copper armored cable of 1.1KV grade as required.

Supply and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, Interconnections, powder painted including earthing etc.As required.(But without MCB/RCCB/Isolator) 12 way, Double door. Make: Indoasian/Legrand/Havells/MDS

Supply and fixing 5 amps to 32 amps rating, 240/415 volts,10 KA,"C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Legrand/ Havells/L&T/Seimens

Single pole

Double pole

Triple pole and neutral

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Supply and fixing of 4 Way 20 A , cennector Strip with connector Box.for connecting Fan/LED fittings.

Dismantling of existing old Distribution Boards / Panels / fittings/ wires/ cables/ Fans etc. from ceiling/Wall at hanger.

Supply of Pedestal fans (24 inch sweep , heavy duty , metal blade & body) complete with all accessories & connection as required in office cabin/ hanger. Make: Almonard / Havells / CG ./ USHA

Supplying and fixing following piano type switch/ socket on the slotted sunmica top wooden board size 6’’x 8’’ (150mm x 200mm) having 5 pin16 Amp. Socket and Switch –01and 5pin6 Amp. Socket and Switch –01 Nos including connections etc. as required directly on wall.

Supplying and making indoor end termination with brass compression gland & aluminium lugs for 3 ½ x 300 sq.mm(70mm) of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required.

KSB ELECTRICAL SERVICES

Suvarna Electricals Pvt Ltd