Rejuvenation of Kiryani Talab, Tehsil Bahu 2nd Time

Dewatering of Pond using submersible or Centifugal pumps based on pond size and desired dewatering speed of 250 gallons per minute.

Weed clearnace from canal including extraction of roots.

Silt clearance from canals. Inclusive of initial lead and lift ( 50m & 1.5m respectively )Wet.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed all kind of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Disposal of excavated silt/earth upto 5 km. by mechanical transport as per the direction of Engineer-in-charge

Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand).

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature Jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for pay.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing G.I. chain link fabric fencing of required width inmesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm

Supply & Installation of Solar street light – having MS powder coated body encases Solar PV panel poly-crystalline, comprising of Lithium battery with in-built BMS, high brightness LED light, driver efficiency more than 90%, High efficiency charge controller with automatic dimming functionality (with 12m PIR motion sensor) compliant to IP-65 automatic Dusk to Dawn operation, working temperature 0 C to 55C, with battery overcharging and battery deep discharging protection. Indications should include GREEN LED for battery charging and RED LED for battery low (one blink every 2 second) and Solar panel dirty indication (two blinks every 2 second). Light should be properly packed in Litlon (1 inch thick or better) to avoid any damage during transit 12Watt LED Material: Aluminium Alloy Solar Panel: Monocrystalline, Max Power 18V/35W LED Power: Bridgelux 12W Battery : Li ion 14Ah Lumens : 1360 - 1560 , View angle- 120⁰ Install Height : 4 - 6m Charge time : 6 - 8 hours Discharge time : 8 - 12 hours Backup : 2 - 3 days warranty period : - One year onsite Warranty

Sand average lead 4 km

Aggregates average lead 7km