Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.4 LAccepted-AOC | L1 | Accepted-AOC AOC awarded due to L1 bidder | |
| 2 | L2₹49.3 L+₹92,254.70 (1.91%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹50.6 L+₹2.2 L (4.52%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹52.7 L+₹4.3 L (8.85%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹53.3 L+₹4.9 L (10.2%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹47 L
EMD Value
₹96,000
Closing Date
10 Aug 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL BIRENDRA SINGH
GE 859 EWS PIN- 913859 C/O 99 APO
PROVISION OF 02 X SINGLE PERSONAL LIVING ACCOMMODATION (SIZE 9 MTR X 7 MTR) WITH ATTACHED TOILET AND BATHROOM FOR DSC PL AT 181 MILITARY HOSPITAL AND PROVISION OF COVERED SHED FOR WATER SEDIMENTATION TANK OF AGE B/R AND AGE E/M UNDE
2023_MES_609996_1
8446/E8
Open Tender
Civil Works
Item Rate
180 days
BIRPUR
PL REFER TO TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹96,000
Yes
11 Oct 2023
20 Jul 2023
11 Aug 2023
20 Jul 2023
10 Aug 2023
3 Aug 2023
Amount
Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil.
M&L Providing, PCC 1:2:4,type B-1 (20mm graded agg) in roof kerbs or mud stops, rounded or chamfered on edges
M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregatein in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases).
Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level).
M&L for 40 mm thick cement concrete type B- 1, 1:2:4 (20mm graded aggregate as in sub-base, floors and pavings etc complete all as specified and directed.
M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 complete all as specified.
M&L for joint free coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 finished rough for laying wall tiles.
M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.
S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240complete all as specified and directed.
M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
M&L for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
M&L for preparation of new or previously untreated steel Surfaces of any description, not otherwise described, over 10cm width or girth with two coat of synthetic enamel paint over a coat of red oxide primer.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil.
M&L for Hardcore of (Broken stone or boulders) gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surfaces.
M&L for 75 mm thick cement concrete type C- 2, 1:3:6 (40mm graded aggregate as in sub-base, floors and pavings etc complete all as specified and directed.
M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes with CM 1:6 complete all as specified.
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified.
Excavation over areas n exc 1.5 m deep and getting out in hard/dense soil with complete as as specified and directed by Engineer-in-Charge
Excavation in trenches n,exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in hard/dense soil with complete as as specified and directed by Engineer-in-Charge
Excavation over areas exc 1.5 m deep and n. exc 3.00M and getting out in hard/dense soil.
Returning/filling in including spreading, levelling, watering and well remming in hard/dense soil.
Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point.
M&L PCC 1:4:8 type D2(using 40mm graded aggregate)as in foundation filling and mass concrete etc with complete as as specified and directed by Engineer-in-Charge
M&L for MS TMT bars 12mm dia and over, cut to lenth, bend to shape required, including cranking, bending, sprially for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips with complete as as specified and directed by Engineer-in-Charge
M&L for MS TMT bars 08 mm dia and over, upto and including 10 mm dia in stirrups, spaces and binders.
M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in foundation, including rafts footing, foundation beams, plinth beams, bases for columns etc complete.
M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in columns, pillars etc with complete as as specified and directed by Engineer-in-Charge
M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in beams, plinth beams, cantilevers, bressummers, lintels over 1.5 m span etc with complete as as specified and directed by Engineer-in-Charge
Form work to edges of concrete flat, tread, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n.exc 10 cm wide for rough finish surfaces of concrete.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete.
M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete.
M&L for precast cement concrete solid building blocks (1:3:6), type C-1, 10 cm thick (with plain or interlocking joints as directed) setting in cement mortar (1:4), complete, laying inner side of wall.
M&L rendering 15 mm thick in CM 1:4 on concrete surfaces finished even and smooth without using extra cement .
M&L for rendering 15 mm in CM (1:6) over concrete wall surfaces finished even and smooth without using extra cement.
Preparing newly plastered surfaces of walls and applying three coats of white wash.
M&L for newly plastered surfaces of walls and applying two coats of cement based paint, over a coat of primer complete all as specified and directed.
Preparing new plastered surfaces of wall and applying Two coats of acrylic distemper/ distemper oil emulsion (OBD), over a coat of thick wall care putty all as specified including preperation of surfaces
S & F roof trusses (framed), trussed, purlines, crane grantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance piecces, cleats, plates etc confirming to Fe.290.Gde-E-165 with complete as as specified and directed by Engineer-in-Charge
M & L 75 mm thick Cement concrete type D2,1:4:8 (40mm graded aggregate) as in sub base, including form work with complete as as specified and directed by Engineer-in-Charge
M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in sub base of floorings.
M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles .
M & L for Non-skid ceramic tiles 7 to 8 mm thick coloured tiles( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding .38 sqm, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
M&L for 20 mm thick screed bed in CM 1:4 for laying floor tiles .
S & F 3mm thick figured glass, pin head glazing with oil putty /wooden beads in squares n exc 0.50 Sqm in each pane.
M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation.
S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces.
M & L for 2 nd class Hard wood plain fillets, square, rectangular or triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm.
S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.
S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 nos/Rm and decorative end supports etc complete all as directed”
S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing.
S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete
S&F 30mm flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both side and both face is covered with decorative face veneer with lipping/frame tp match all as completed and specified as directed.
S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc
S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0.
S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed.
S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed
S & F 100mm size extruded aluminium alloy handles, fabricated type anodised
S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed
S&F 100mm size stainless steel butt hinges, medium weight, cold rolled complete with stainless steel screw etc. all as specified as directed.
S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed
S & F 150mm size extruded aluminium alloy handles, fabricated type anodised
Fix in repair Vitreous China Squatting pan 'Orissa pattern' size 580 x440 mm white with integral foot rest.
S & F vitreous china wash down water closet pan of pedestal pattern, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified.
S&F vitreous china bowl urinal flat back, size of 465x355x265 mm white (minimum), (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs, fixing of flush pipe, waste pipe, grating and connection to water supply pipe with complete as as specified and directed by Engineer-in-Charge
S & F 10 litres PVC, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets complete.
S&F PVC connection of 15 mm size with PTMT nuts of length 450 mm
S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe(minimum weight 60 gms).
S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls
S&F PVC (SWR) junction single, (single T) equal or unequal with access door 110mm dia.
S&F PVC (SWR) bends any radius, bend 110mm dia.
S&F PVC (SWR) vent cowl 110mm dia
S&F PVC (SWR) WC connector 110mm dia lip ring.
S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.
S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints fixed to walls.
S&F PVC (SWR) bends any radius with access door, 75mm dia.
S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls .
S&F 15 mm dia bib taps, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F 15mm bore angle stop valves, fancy type chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions & fixed.
S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between fllanges.
S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in ends of brackets or errecting stand but exclusive of fixing of waste pipe and CI brackets complete all as specified and directed.
S&F 32 mm bore Low density poly ethylene pipes of pressure rating 6kgf/cm2 fixed complete to walls,ceiling or in floors etc.
S&F 15 mm bore chromium plated fancy type pillar tap cast copper alloy with capstan heads, screwed down high pressure,with or without leterred "Hot ot Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
S&F Rotational mounded polythene water storage tank of 1000 ltrs capacity, (multilayered, cylindrical, vertical with closed top) hoisted and fixed in position as specified in SSR Pt-I.
S&F ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipes of 20 mm dia or brass ferrule and fixed, all as directed.
S&F Gun metal globe or gate valve with Iron wheel head, screwed both ends for 20 mm dia of pipe and fixed.
S& F 20 mm bore galvanised steel tubes medium grade with all fittings for water supply pipes fixed to walls.
M&L for construction of 1.20 m dia x 3.00 m deep soakage well, excavation in hard/dense soil foundation PCC 1:3:6 ,wells of honey combed stone masonry wall, including intercepting chamber, screen chamber, RCC cover slab, filling with brick bats etc complete all as specified.
Material and labour for providing PCC (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 150mm on after they are laid and tested complete all as specified and directed.
Material and labour for providing PCC (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 100mm on after they are laid and tested complete all as specified and directed.
Material and labour for Salt glased stone ware drain pipe 150 mm dia grade A laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed.
Material and labour for Salt glazed stone ware drain pipe 100 mm dia grade A laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed.
Point wiring with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 1.5sqmm as continous earth wire connected to common earth and earth dolly for One light / Fan point controlled by one way switch 6 Amp complete all as specified and directed. Make of wire - Havells/Polycab/Finolex/KEI
One 3 pin socket outlet 5 Amps on the same board with other switches
One 3 pin socketoutlet 5 Amps socket out let controlled by one switch on independent board
Point wiring for Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLS copper conductor single core 2.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 2.5 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed. Make of wire - Havells/Polycab/Grandlay/HPL or equivalent in approved makes
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. Make : Anchor/Legrand/Crabtree
Supply and fixing switch socket combination, 3 pin, 6 Amp piano complete all as specified & directed. Make : Anchor/Legrand/Crabtree
Supply & fixing Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal, 240 Volts complete all as specified & directed. Make : Anchor/Legrand/Crabtree
S&F lamp holderinsulated body PVC/ polycarbonate type with back plate for batten fitting with one PVC block of complete all as specified and directed.
Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed. Make : Anchor/Legrand/Crabtree
Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder, two square box for mounting including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complet
SS & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
S&F 1x 9 watt LED lamp complete all as specified and directed. Make: Havells/ Phillips/ CG/ Bajaj
Supply & Fixing sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral link & earth bar and cement spill protector, 8 way, 240 Volt incl fixing on suitable size of PVC rectangular plastic laminated sheet complete all as specified and directed. Make : Havells/ABB/Schneider/Legrand
Supply and fixing PVC rectangular block for mounting DB's with 3 mm thick plastic laminated sheet cover of size 30 cm x 25 cm x 50 cm complete all as specified and directed.
Supply and fixing miniature circuit breaker (MCB) SP 5 To 32 AMP, 240V, 10KA, 'C' curve in the MCB DB complete with connection testing and commissioning as specified and directed.
Supply and fixing miniature circuit breaker (MCB) SPN 32 AMP, 240V, 10KA, 'C' curve in the MCB DB complete with connection testing and commissioning as specified and directed.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor 10 sq mm, served with inner sheathing of PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular incl taking down/ dismantling of old one complete all as specified and directed.
Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete ass as specified and testing on completion complete ass as specified and directed .Note - The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.
M/S ASHOK CONSTRUCTION
M/S DK TRADERS
M/S MURPHEW ENTERPRISES
M/S SM ANSARI
M/S N D ENTERPRISE
M/S SUNRISE CONSTRUCTION AND CO
M/S YOGENDRA CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .