Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹22.8 LAccepted-AOC | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹26.5 L+₹2.5 L (10.5%)Rejected-AOC 216 UGF RAM VIHAR ANAND VIHAR DELHI 110092 | SHAHDARA | DELHI | 110092 | L-2 | Rejected-AOC L-2 | |
| 3 | L-3₹29.9 L+₹5.9 L (24.7%)Rejected-AOC | L-3 | Rejected-AOC L-3 | |
| 4 | L-4₹34.6 L+₹10.6 L (44.0%)Rejected-AOC | L-4 | Rejected-AOC L-4 |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
21 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I RND DELHI
MILITARY ENGINEER SERVICE, GARRISON ENGINEER (I) RND, LUCKNOW ROAD, TIMARPUR, DELHI-110054
REPAIR/REPLACEMENT OF JOINERY AND ALLIED WORKS AT RESIDENTIAL AREA OF ZONE A AND B UNDER GE I RnD DELHI
2023_MES_575700_1
GE/RND-102/DLI/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Delhi
Class-D, Cat-a(i)
2 documents required · 2 mandatory
₹500
GE I RND DELHI
₹90,000
Yes
8 Apr 2023
18 Jan 2023
23 Feb 2023
18 Jan 2023
21 Feb 2023
9 Feb 2023
Amount
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm and making good to distrubed surface complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm and making good to distrubed complete all as specified and directed.
Taking down shutter of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed.
S&F pressed steel frames for doors with one or more rebates of size 125x60 mm including necessary fixing lugs, lock strike plate etc made out of 1.25 mm thick MS sheet complete all as specified and directed.
S&F pressed steel frames for doors with one or more rebates of size 105 x 60 mm including necessary fixing lugs, lock strike plate etc made out of 1.25 mm thick MS sheet complete all as specified and directed.
S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick, style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per specification and drawing complete all as specified and directed.
S&F 35 mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides complete all as specified and directed.
S&F 35 mm thick factory made, 2nd class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces with the size of rail and style as per IS-1003 (Part I) complete all as specified and directed.
S&F 35 mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc sizes of member as specified in SSR Part I sec 8 clause 8.20 (a) complete all as specified and directed.
Dismantling mild steel works of any description not otherwise provided for complete all as specified and directed.
S&F Mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if required, hooks (stay) heavy for large gates hook and pintle large hasp and staple, chains, hand made sliding bolts, clamps, hold fasts, wall ties etc hooks for hanging fans, plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.
M&L for preparation of new wooden surface over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 100 mm size mild steel butt hinges, medium weight cold rolled complete all as specified and directed.
S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm size aluminium handles cast type, anodised complete all as specified and directed.
S&F 250mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F factory made windows/ventilators fabricated from roll framed sections made of galvanized steel colour coated/powder coated (Base steel as per IS 513 "D" quality galvanized as per IS 277 with zinc of 120 gms/Sqm) with total coated thickness of 0.60 mm.Coated section with primer coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick or powder Coated with pure Polyester up to 50-60 microns thick. Sectoins for frame of 72mm X 55mm, section for mullion of 72mm X 50mm, section for shutter frame of 47mm 20mm, section for fixed glass bead of 12mm X 2mm, and section for fly mesh of 40mm X 20mm. Section for frame glazed shutters and mesh shutters should be cut to length and miter joined with Polypropylene corner brackets, mullion section should be joined with frame /mullion using mullion cap ethyl propylene damien monomer (EPDM) Gasket used all around glass in shutter and fixed glass.Spoon profile used around fly mesh to fix mesh in mesh shutter.Each glazed shutter and mesh shutter should be provided with SS pivot hinges -1 set, seccolor handle & seccolor stay. window frame should be fixed to brick/concrete masonary by using nylon self expanding caps and driving MS electroplated 80mm long screws into the caps through frame. Glass shutter & fixed glass portion should be provided with a glass of 5MM plain float glass. Mesh shutter should be provided with a stinless steel 32 gauge fly mesh of 304 grades with 144 holes per square inch. Windows should be provided with grill made of 10mm sq. MS bars welded to at 150mm center-to-center, 6mm X 12mm MS flat.Total grill unit powder coated and fixed to window frame complete all as specified and directed.
S&F Factory made steel window, box type, using ERW hollow 'P' section , comprising double frame for and including gauged and glazed skeleton shutter, jointing internally with flat iron 40 x 4 mm including grill/guard bars of 8 mm Square bars fixed horizontally @100mm C/C including mild steel hinges, handles, tower bolts, stops, lugs etc, complete all as specified and directed. Note - The work will be executed at site as per Drg No. CE R&D TD/AR/145/2016 sheet No. 1/3 to 3/3.
M&L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in filling hollow portions of pressed steel frame complete all as specified and directed.
S&F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed.
Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.
S&F 4 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc) complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.
M&L for Ist class non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exc.0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry pointed in white or coloured cement to match the shade of tile, over and including 15 mm thick screed bed in CM 1:6 and complete all as specified and directed.
M&L for Ist class non skid ceramic coloured tiles 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exc.0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry pointed in white or coloured cement to match the shade of tile, over and including 15 mm thick screed bed in CM 1:6 and complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over 10 mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for premium class fully vitrified tiles light shade 9 mm to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.16 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for premium quality fully vitrified tiles light shade 9 mm to 10 mm thick (square/rectangular) polished,area of each tiles exc 0.16 sqm but n.exc 0.36 sqm, in vertical surfaces i.e. skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over & including 10 mm thick rendering in CM 1:4 complete all as specified and directed.
Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick plaster in CM 1:4 on brick/concrete surface finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering 15 mm thick plaster in CM 1:6 on brick walls or concrete surface, surface finished even and fair without using extra cement complete all as specified and directed.
M&L for 2mm thick wall care putty (in two layers, each layer minimum 1mm thick) on newly plastered surfaces of walls complete all as specified and directed.
M&L for Preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion complete all as specified and directed.
M&L for Preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.
M&L in repairs aluminium sheeting 0.71 mm thick fixed to wooden shutters with CP brass screws including cutting to required size etc complete all as specified and directed.
S&F in repair 18-19mm thick Prelaminated particle board, interior grade, Prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws complete all as specified and directed.
S&F in repair night latch 75 mm 4 lever brass body complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipes etc exc 500 ltr but n exc 1000 ltr complete all as specified and directed.
M&L applying cementitious water proofing coatings by cleaning the surface by water jet, needle gun etc to remove all contaminants within pores / below holes, properly wet the surface mix acrylic co polymer and specifically graded cementious powder at the ratio 1:1.5 by weight, applying the first coat and leave to harden for 2 to 6 hrs, applying second coat and finishing by rubbing down with soft/dry sponge complete as per manufacturers instructions complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for water proofing treatment to sunken slab complete including taking out old unserviceable and removal debris outside MoD land complete all as specified and directed in the following operations:- (a) Rendering 15mm thick in CM 1:4 mixed with water proofing compound @1% by weight of cement including the cost of water proofing compound (b) After drying of plastered surface suitable primer 85/25 or 90/15 shall be coated on the surface. (c) Polymer Membrane @ 3Kg/sqm shall be unrolled over the coated surface (with overlap of 10cm) and bonded completely to the primed surface. The overlap shall them sealed by the tourch flame. (d) Toping with PLASFAL @ 1.20Kg/Sqm on memberance shall then bonded on top of blown bitumen on 85/25 or 90/15 shall be applied @ 1.20 Kg/Sqm on top of plasfal. Note:- The water proofing treatment shall be carried out by a specialised agency.
Removal of demolished material with a lead of 5 Km outside the MOD land complete all as specified and directed.
S&F in repair sand cast iron soil waste & vent pipes 100mm dia in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed.
S&F in repair sand cast iron soil waste & vent pipes 100mm dia in any length with or without ears with cement joint fixed to wall complete all as specified and directed. Note : Necessary scaffolding required to carry out work upto G+6 story shall deemed to be included in quoted rate.
S&F in repair sand cast iron soil waste & vent pipes 75mm dia in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed.
S&F in repair sand cast iron soil waste & vent pipes 75mm dia in any length with or without ears with cement joint fixed to wall complete all as specified and directed. Note : Necessary scaffolding required to carry out work upto G+6 story shall deemed to be included in quoted rate.
S&F in repair sand cast iron bends 100 mm dia diminishing piece or tapers (large bore measured) complete all as specified and directed.
All as per srl item No. 48.00 above but 75mm bore
S&F in repair brass CP grating 125 mm dia with or without hole for waste pipe fixed with cement mortar complete all as specified and directed.
S&F in repair Vitreous china wash down water closet pan (pedestal pattern) white, including connection to drain pipe, and to flushing pipe antisyphonage pipe etc complete all as specified and directed.
S&F in repair vitreous china squatting pan 'Orissa' pattern long pan size 580 x440 mm white with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F soft close auto hinges of standard sizes fixed to cabinets or cupboards of 0 crank/8 crank/16 crank as required 'L' bihari complete all as specified and directed
S&F floor door stopper of aluminium alloy body and tongue anodised with drawn steel spring fixed to door with overall length of cover plate 140mm complete all as specified and directed.
S&F stainless steel curtain rods 20/25 mm dia including fixing brackets, stops, rollers etc complete all as specified and directed.
M&L for preparation of old plastered or un-plastred surfaces of walls by brooming down or steel wire brushing scrapping down smoke soot moulds, Moss and efflorescent salt and trading oil and gresy spots and applying one coat of white wash on wall complete all as specified and directed.
All as per item Ser No 56.00 above but on ceiling.
M&L for preparation of old decorated surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and directed.
All as per item Ser No 58.00 above but two coats.
M&L for applying one coat of synthetic enamel paint over old painted steel surfaces of any descripition over 10cm width or girth including preparation of surfaces complete all as specified and directed.
All as per item Ser No 60.00 above but wooden surface.
S&F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.
All as per item Ser No 63.00 above but without glazing bars.
S&F Mild steel framed work such as grills, gratings,etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing; frame work for water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed.
S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide/zinc chrome primer complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.
M&L for 2.50mm thick PVC tiles/sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified and directed.
M&L for complete removal of the existing treatment of walls and applying 2mm thick wall care putty in two layers (each layer of putty minimum 1 mm thick ) complete all as specified and directed.
M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed. Note:- Rate also includes necessary scaffolding to carry out work upto a height of G+6 floor.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.
M&L for granite work 16 to 18 mm thick of any type (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and the like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
V M CONSTRUCTION
SAWARIYA ENGINEERS AND CONTRACTORS
DR Buildcon
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .