Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.9 LAdmitted-Finance B17 ROOMA UPSIDC INDUSTRIAL AREA ROOMA KANPUR KANPUR NAGAR UTTAR PRADESH 209402 | KANPUR NAGAR | UTTAR PRADESH | 209402 | L1 | Admitted-Finance | |
| 2 | L2₹13.1 L+₹2.1 L (19.3%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹16.5 L+₹5.5 L (50.4%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | ASIAN SWITCHGEAR PVT. LTD L1 | S.T.Electricals Pvt Ltd L3 | Eagle Enterprises L2 |
|---|---|---|---|---|---|---|
| 1.00 | A-1 Type Distribution Panel
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting double door type outdoor application,with
M.S. Channel Base with bottom and top cable entreis shall be detachable type gland plate Electrical control panel with TPN ACB(65 KA,4Pole Elect draw out , Micor processer Release icu=icw=ics 1sec) with short circuit protection and TPN MCCB's (Four Pole 50 KA with thermal magnatic release with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and incomming section connecting with proper horizental /vertical busbar and outgoing section with cable alley section and shall metering with digital multifuncation meter with inbuilt Selector switches, istrument fuses, red yellow and blue phase indicators in incomming section, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink color code sleev and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes.
The Job includes the disconnecting and dismentling of existing A-1 type distribution panel including of complete replace old burn cables ends and joint new cable with cable jointers, luges, double compression glands,etc new cables will joint as per connected sizes in incoming and outgoing sections, the grounting of the panel board as per directions of Engineer-in charge. INCOMING : 1250 Amp ACB 1 No and OUTGOING 250 AMP MCCB 6 NOS AND 100 AMP MCCB 2 NOS WITH EXTENDED ROTARY HANDEL,SPREDER SET ,PHASE BARRIER etc The switch board shall be fabicated with gelvnized prime sheet with a minimum thickness of 1.6 mm/2mm. with seven tank process powder coated SWITCHGEAR MAKE : SCHEINDER/ABB/SIEMENS/C&S | 4 | Nos. | 2,68,150 ₹3,03,150 Lowest | 4,52,732 ₹4,83,982 | 4,00,000 ₹4,20,000 |
| 2.00 | A-2 Type Distribution Panel
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting double door type outdoor application,with
M.S. Channel Base with bottom and top cable entreis shall be detachable type gland plate Electrical control panel with TPN MCCB's (Four Pole 50 KA with thermal magnatic release with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and incomming section connecting with proper horizental /vertical busbar and outgoing section cable alley section and shall metering with digital multifuncation meter, with inbuilt Selector switches, istrument fuses, red yellow band blue phase indicators in in comming section, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink color code sleev and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes.
The Job includes the disconnecting and dismentling of existing A-3 type distribution panel including of complete replace old burn cables ends and joint new cable with cable jointers, luges, double compression glands,etc new cables will joint as per connected sizes in incoming and outgoing sections grounting of the panel board as per directions of Engineer-in charge. INCOMING : 630 Amp MCCB 1 No and OUTGOING 160 AMP MCCB 5 NOS AND 100 AMP MCCB 2 NOS WITH EXTENDED ROTARY HANDEL,SPREDER SET ,PHASE BARRIER etc The switch board shall be fabicated with gelvnized prime sheet with a minimum thickness of 1.6 mm/2mm. with seven tank process powder coated SWITCHGEAR MAKE : SCHEINDER/ABB/SIEMENS/C&S | 12 | Nos. | 1,45,000 ₹1,68,000 Lowest | 2,31,307 ₹2,56,307 | 2,00,000 ₹2,18,000 |
| 3.00 | A-3 Type Distribution Panel
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting double door type outdoor application,with
M.S. Channel Base with bottom and top cable entreis shall be detachable type gland plate Electrical control panel with TPN MCCB's (Four Pole 50 KA with thermal magnatic release with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and incomming section connecting with proper horizental /vertical busbar and outgoing section cable alley section and shall metering with digital multifuncation meter, with inbuilt Selector switches, istrument fuses, red yellow band blue phase indicators in in comming section, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink color code sleev and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes.
The Job includes the disconnecting and dismentling of existing A-3 type distribution panel including of complete replace old burn cables ends and joint new cable with cable jointers, luges, double compression glands,etc new cables will joint as per connected sizes in incoming and outgoing sections grounting of the panel board as per directions of Engineer-in charge. INCOMING : 630 Amp MCCB 1 No and OUTGOING 160 AMP MCCB 5 NOS AND 100 AMP MCCB 2 NOS WITH EXTENDED ROTARY HANDEL,SPREDER SET ,PHASE BARRIER etc The switch board shall be fabicated with gelvnized prime sheet with a minimum thickness of 1.6 mm/2mm. with seven tank process powder coated SWITCHGEAR MAKE : SCHEINDER/ABB/SIEMENS/C&S | 12 | Nos. | 1,45,000 ₹1,68,000 Lowest | 2,20,870 ₹2,45,870 | 2,00,000 ₹2,18,000 |
| 4.00 | A-5 Type Distribution Panel
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting double door type outdoor application,with
M.S. Channel Base with bottom and top cable entreis shell be detachable type gland plate Electrical control panel with TPN MCCB's (Four Pole 50 KA with thermal magnatic release with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and incomming section connecting with proper horizental /vertical busbar and outgoing section cable alley section and shall metering with digital multifuncation meter, with inbuilt Selector switches, istrument fuses, red yellow band blue phase indicators in in comming section, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink color code sleev and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes.
The Job includes the disconnecting and dismentling of existing A-4 type distribution panel including of complete replace old burn cables ends and joint new cable with cable jointers, luges, double compression glands,etc new cables will joint as per connected sizes in incoming and outgoing sections grounting of the panel board as per directions of Engineer-in charge. INCOMING : 250 Amp MCCB 1 No and OUTGOING 100 AMP MCCB 5 NOS AND 63 AMP MCCB 1 NOS WITH EXTENDED ROTARY HANDEL,SPREDER SET ,PHASE BARRIER etc The switch board shall be fabicated with gelvnized prime sheet with a minimum thickness of 1.6 mm/2mm. with seven tank process powder coated SWITCHGEAR MAKE : SCHEINDER/ABB/SIEMENS/C&S | 22 | Nos. | 84,400 ₹1,04,400 Lowest | 1,36,716 ₹1,61,716 | 1,30,000 ₹1,45,000 |
| 5.00 | B-1 Type Distribution Panel
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting double door type outdoor application,with
M.S. Channel Base with bottom and top cable entreis shell be detachable type gland plate Electrical control panel with TPN MCCB's (Four Pole 50 KA with thermal magnatic release with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and incomming section connecting with proper horizental /vertical busbar and outgoing section cable alley section and shall metering with digital multifuncation meter, with inbuilt Selector switches, istrument fuses, red yellow band blue phase indicators in in comming section, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink color code sleev and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes.
The Job includes the disconnecting and dismentling of existing B-1 type distribution panel including of complete replace old burn cables ends and joint new cable with cable jointers, luges, double compression glands,etc new cables will joint as per connected sizes in incoming and outgoing sections grounting of the panel board as per directions of Engineer-in charge. INCOMING : 250 Amp MCCB 1 No and OUTGOING 160 AMP MCCB 6 NOS WITH EXTENDED ROTARY HANDEL,SPREDER SET ,PHASE BARRIER etc The switch board shall be fabicated with gelvnized prime sheet with a minimum thickness of 1.6 mm/2mm. with seven tank process powder coated switchgear make: scheinder/ abb/scheinder | 50 | Nos. | 1,09,800 ₹1,29,800 Lowest | 1,69,303 ₹1,94,303 | 1,30,000 ₹1,45,000 |
| 6.00 | B-2 Type Distribution Panel
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting double door type outdoor application,with
M.S. Channel Base with bottom and top cable entreis shall be detachable type gland plate Electrical control panel with TPN MCCB's (Four Pole 50 KA with thermal magnatic release with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and incomming section connecting with proper horizental /vertical busbar and outgoing section cable alley section and shall metering with digital multifuncation meter, with inbuilt Selector switches, istrument fuses, red yellow band blue phase indicators in in comming section, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink color code sleev and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes.
The Job includes the disconnecting and dismentling of existing B-2 type distribution panel including of complete replace old burn cables ends and joint new cable with cable jointers, luges, double compression glands,etc new cables will joint as per connected sizes in incoming and outgoing sections grounting of the panel board as per directions of Engineer-in charge. INCOMING : 200 Amp MCCB 1 No and OUTGOING 125 AMP MCCB 6 NOS WITH EXTENDED ROTARY HANDEL,SPREDER SET ,PHASE BARRIER etc The switch board shall be fabicated with gelvnized prime sheet with a minimum thickness of 1.6 mm/2mm. with seven tank process powder SWITCHGEAR MAKE : SCHEINDER/ABB/SIEMENS/C&S | 50 | Nos. | 93,800 ₹1,11,800 | 1,31,358 ₹1,50,108 | 65,000 ₹75,000 Lowest |
| 7.00 | B-3 Type Distribution Panel
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting double door type outdoor application,with
M.S. Channel Base with bottom and top cable entreis shall be detachable type gland plate Electrical control panel with TPN MCCB's (Four Pole 50 KA with thermal magnatic release with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and incomming section connecting with proper horizental /vertical busbar and outgoing section cable alley section and shall metering with digital multifuncation meter, with inbuilt Selector switches, istrument fuses, red yellow band blue phase indicators in in comming section, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink color code sleev and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes.
The Job includes the disconnecting and dismentling of existing B-3 type distribution panel including of complete replace old burn cables ends and joint new cable with cable jointers, luges, double compression glands,etc new cables will joint as per connected sizes in incoming and outgoing sections grounting of the panel board as per directions of Engineer-in charge. INCOMING : 200 Amp MCCB 1 No and OUTGOING 100 AMP MCCB 6 NOS WITH EXTENDED ROTARY HANDEL,SPREDER SET ,PHASE BARRIER etc The switch board shall be fabicated with gelvnized prime sheet with a minimum thickness of 1.6 mm/2mm. with seven tank process powder coated switchgear SWITCHGEAR MAKE : SCHEINDER/ABB/SIEMENS/C&S | 60 | Nos. | 89,600 ₹1,06,600 | 1,28,642 ₹1,47,392 | 65,000 ₹80,000 Lowest |
| 8.00 | C Panel
Disconeccting and dismentling of existing C panel and Supply, installation testing commisioning of factory fabricated & wired metal clad dust and vermin proof double door type outdoor application stand mounting,
M.S. Channel Base incliding channel stand with bottom cable entreis The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on nonhygroscopic supports such as CMC/BMC support. panel shall be complete with suitable cable end boxes, double compression glands. panel comparment having special provision for internal locking system for stop the electricity theft The panel board shall be fabricated with gelvnized prime sheet with a minimum thickness of 1.6mm/2mm. with seven tank process powder coated. panel haveing proper space for connecting incomming and outgoing cable terminations MAKE: APC/SCHEINDER/ABB/SIEMENS/C&S | 650 | Nos. | 2,550 ₹3,050 Lowest | 4,592 ₹6,467 | 4,000 ₹4,800 |
Tender Value
Refer Docs
EMD Value
₹2.5 L
Closing Date
2 Jul 2021, 12:00 pmClosed
SE, EUDC, MATHURA
SE, EUDC OFFICE, NEAR TANK CHAURAHA, MATHURA
For Supply of various type new ABC Distribution Panel with complete accessories and installation on Turn Key Basis in the area of EE, EUDD-I, II, III, Mathura under the jurisdiction of SE, EUDC, Mathura
2021_DVVNL_584455_1
63/EUDC(M)/2020-21
Open Tender
Electrical Works
Turn-key
90 days
SE, EUDC
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,000
dvvnl.org
₹2.5 L
14 Jul 2021
26 Apr 2021
2 Jul 2021
26 Apr 2021
2 Jul 2021
26 Apr 2021
Amount
C Panel Disconeccting and dismentling of existing C panel and Supply, installation testing commisioning of factory fabricated & wired metal clad dust and vermin proof double door type outdoor application stand mounting, M.S. Channel Base incliding channel stand with bottom cable entreis The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on nonhygroscopic supports such as CMC/BMC support. panel shall be complete with suitable cable end boxes, double compression glands. panel comparment having special provision for internal locking system for stop the electricity theft The panel board shall be fabricated with gelvnized prime sheet with a minimum thickness of 1.6mm/2mm. with seven tank process powder coated. panel haveing proper space for connecting incomming and outgoing cable terminations MAKE: APC/SCHEINDER/ABB/SIEMENS/C&S
Eagle Enterprises
S.T.Electricals Pvt Ltd
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .