Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.1 LAccepted-AOC 58 SHAHEED NAGAR OPP BHIMRAO AMBEDEKAR UNIVERSITY RBL ROAD LUCKNOW 226025 UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226025 | L1 | Accepted-AOC L1 | |
| 2 | L2₹29.3 L+₹30,377 (1.05%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹29.4 L+₹39,300 (1.36%)Rejected-Finance 73 ASHOTOSH NAGAR NEAR KUNDAN GENERAL STORE OPP SARAD TIMBER P O MANAS NAGAR KRISHNA NAGAR LUCKNOW 226023 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226023 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹29.5 L+₹55,851.50 (1.93%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹29.9 L+₹95,375 (3.29%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹38.3 L
EMD Value
₹76,700
Closing Date
30 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE West Lucknow
GE West Lucknow, 11 Sardar Patel Marg, Lucknow Cantt-226002
SPECIAL REPAIR TO QTR NO 71/2 AND SERVANT QTRS OF BLDG NO 7, 8, 71 AND 73 AT USMAN ROAD UNDER GE WEST LUCKNOW
2022_MES_522935_1
GE/W/LKO/20 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
Lucknow
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE West Lucknow
₹76,700
Yes
5 Jul 2022
9 May 2022
1 Jun 2022
9 May 2022
30 May 2022
23 May 2022
9 May 2022 - 16 May 2022
60 days
Amount
Demolition of brick or stone boulder masonary, built in cement mortar including all quions, arches, Pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and directed.
Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
Taking down steel tubing and connection 15mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
Taking down steel tubing and connection 20mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and directed.
M&L Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.
Dismantling stone slab and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor or pavings not exc 15 cm thickness below or above ground level complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each complete all as specified and directed.
Material and Labour for brick work with fly ash bricks old size , straight or curved on plan, exc 6m mean radius as in half brick thick wall, built in CM 1:4 complete all as specified and directed.
Material and Labour for brick work with fly ash bricks old size , straight or curved on plan, exc 6m mean radius, built in CM 1:6 complete all as specified and directed.
Material and Labour for rendering 15mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed..
Material and Labour for rendering 15 mm thick cement plaster in CM 1:4 with water proofing compund (@ 3% by weight of cement) on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed. (Note:- Water proofing compound shall be measured and paid seprately.)
Supply only integral water proofing compound conforming to IS 2645 complete all as specified and directed.
Material and Labour for rendering 10mm thick in CM 1:3 on ceiling of concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed..
M & L for anti termite treatment and treating the soil alongwith the external wall below concrete or masonary using 2.25 litres of emulsion per linear metre of the perimeter wall including drilling and plugging holes etc in apron complete all as specifed and directed
Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.
M&L Pressed steel door frame of size 105 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified and directed. Note :- The hollow portion of frame shall be filled with PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) and compacted properly before fixing the frame to opening, quoted rates shall deemed to include cost of same and nothing extra shall be paid for the same
M&L Pressed steel door frame of size 125 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified and directed. Note :- The hollow portion of frame shall be filled with PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) and compacted properly before fixing the frame to opening, quoted rates shall deemed to include cost of same and nothing extra shall be paid for the same
M&L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 35mm thick 2nd class hard wood glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc, without sash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specifed in SSR Part-I section 8 clause 8.24(a)supplied and fitted to chowkhats complete all as specified.
&F Box type steel windows/ventilators with side hung shutters with glazed and glazed double panel shutters both provision including box type hinges or factory made butt hinges with steel handle, tower bolts hold fasts and steel peg stays etc. complete with glazing bars dovetailed or welded and including 10 mm dia square bars @ 125 mm c/c complete all as per as per TD Drg No LZ/C-TD/130 Sheet No 1/4 to 4/4. Note: No extra payment in variation of section will be made for section profiles of higher sizes.
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S & F Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed.
Supply and fixing factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 110 x 45 mm & sash 40 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension comprising of UPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge complete all as specified and directed. (Note-1. Glazed shutters float glass thickness not less than 5.00 mm and wire mesh shutter with Stainless steel (SS-304) wire mesh 0.36 mm dia with aparture 1.4mm shall also be deemed included in quoted rates and No extra payment will be made separalely 2. For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made
Supply and fixing butt hinges 100mm, mild steel hinges medium weight and fixed complete all as specified and directed.
Supply and fixing aluminium anodized barrel tower bolts 150 mm of extruded section complete all as specified and directed.
Supply and fixing extruded aluminium anodised bow handle of size 125 mm complete all as specified and directed.
Material and Labour for 4mm thick plain sheet glass ordinary quality including glazing with putty or wooden beads area n.exc 0.5 sqm in each pane complete all as specified and directed.
Material and Labour for 4mm thick figured glass pin headed type including glazing with putty or wooden beads area n.exc 0.5 sqm in each pane complete all as specified and directed.
Supply and Fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply and fixing 150mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.
Supply and fixing 250 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over one coat of primer and a layer of wall care putty for smooth finish complete all as specified and directed.
M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.
M&L for two coats of white wash on old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of water based cement primer and including necessary scaffoldings as required etc complete all as specified and as directed.
Material and Labour for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.
Material and Labour for preparation of new or previously untreated surface of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Cutting chases, pinning in, for concealed water tubing etc. in brick walls and making good to disturbed surface in cement mortar 1:3, cutting not exceeding 10cm in girth complete all as specified and directed.
S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair Stop valves, cast copper alloy but fancy type, chromium plated with long shank and cup (concealed type),screwed down high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair 15 mm bore stop valves/angle valve copper alloy, fancy type,chromium plated half turn with screwed down, high pressure with crutch or butterfly handle screwed both ends fixed to GI pipe complete all as specified and directed.
Supply & Fixing in repair 15mm bore PVC connection 450mm long with brass coupling and washer complete all as specified and directed.
S&F in repairs CP brass long body 15mm bore bib tap, cast copper alloy, chromium plated with capstan head, half turn, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
Supply and Fixing in repair Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Supply & Fixing in repair CP shower rose fancy type 125mm thick with or without swivel joints any size including fixed to steel pipe or union complete all as specified and directed.
Dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc. and S&F 500 litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including 20mm dia PTMT float valve complete all as specified and directed.
Supply and Fixing in repair WHB vitreous China white flat back size 550 x 400mm incl brackets, brass CP waste coupling and PVC waste pipe including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.
S & F in repair PVC low level flushing cistern 10ltrs capacity, syphonic action type, white with inlet ball valve, float and handle including brackets with 32mm dia flush pipe of polythelene of low or high density complete all as specified and directed.
Supply and Fixing in repair vitreous china squatting pan, Orissa pattern, long pan size 580 x 440mm with 'P' or 'S' trap with integral foot rest & fixing incl making good floor to match complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, seat cover (white), (excluding flush pipe) and 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed.
Supply & fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Supply & fix in repair CP Brass Tubular Towel Rail, 20mm dia D type 60cm long between flanges complete all as specified and directed.
S&F 15 mm bore CP brass centre hole basin mixture quarter turn with U shape round casted spout with 450mm long braided hoses fixed to GI pipe complete all as specified and directed. Make ESSCO Jaquar Cat NoTQT516A/Hindware Cat No F280009CP
Supply and Fixing in repair CP Wall Mixer 3 in 1 system for mixing hot and cold water, connecting legs, wall flange with provision of both hand shower and overhead shower complete with 115mm long bend pipe complete all as specified. Make ESSCO Jaquar Cat NoTQT517B/Hindware Cat No F280018CP/Parryware G3316A1
S&F glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed
S&Fin repair 110 mm bore PVC (SWR) pipes in any length fixed to wall with clamps complete all as directed.
S&Fin repair 75 mm bore PVC (SWR) pipes in any length fixed to wall with clamps complete all as specified and directed
S&F PVC bends 110 mm bore complete all as specified and directed
S&F PVC bends 75 mm bore complete all as specified and directed
S&F PVC (SWR) branch piece, single (single Y), equal or unequal suitable for 110mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.
S&F PVC (SWR) branch piece, single (single Y), equal or unequal suitable for 75mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.
S&F PVC (SWR) vent cowls suitable for 110mm bore pipes complete all as specified and directed.
S&F PVC (SWR) vent cowls suitable for 75mm bore pipes complete all as specified and directed.
Supply and fixed in repair 75 mm dia PVC nahani trap with CP grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed.
Material and Labour for coloured glazed ceramic tiles 600 x 300 x 7 to 8mm thick on vertical surfaces such as skirting/dado set and jointed in neat cement slurry & pointed in colour cement to match the surface over and including 10 mm thick rendering in cement morter (1:4) complete all as specified and directed.
M&L for Non skid ceramic colour floor tiles shade as approved size 7-8mm thick area of each tile exc 0.11 but n exc 0.18 Sqm set in neat cement slurry and pointed with white or colour cement to match over 15mm thick cement screed in cement mortar 1:6 as in floors complete all as specified and directed
M&L for Non skid ceramic colour floor tiles shade as approved size 7-8mm thick area of each tile exc 0.18 but n exc 0.38 Sqm set in neat cement slurry and pointed with white or colour cement to match over 15mm thick cement screed in cement mortar 1:6 as in floors complete all as specified and directed
M&L for Non skid ceramic colour floor tiles shade as approved size 7-8mm thick area of each tile exc 0.18 but n exc 0.38 Sqm set in neat cement slurry and pointed with white or colour cement to match over 10mm thick cement rendering in cement mortar 1:4 as in skirtings complete all as specified and directed
M& L for Vitrified tiles double charged 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.
All as per above item No. 73 but on vertical surfaces over and including 10mm thick rendering in CM 1:4 , complete all as specified and as directed.
M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).
Demolition of RCC in ground floor and paving exc 15cm thick and below or above ground level complete all as specified and directed.
M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs, hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
M&L Mild Steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for 18-20mm thick Granite stone slab, machine cut and polished as in cooking platform in full lenght,and window cills bedded and jointed with grey cement slurry and pointed to match the shade of granite sotne, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, grinding, making hole for gas pipe line and including making sandwitch moulding to edges complete all as specified and directed.
S&F sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460 mm with bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink incl 40mm dia Waste coupling of PTMT (half or full threaded) complete all as specified and directed.
S&F sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 560x410x200mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink incl 40mm dia Waste coupling of PTMT (half or full threaded) complete all as specified and directed.
S & F in repair 25mm dia fancy type stainless steel curtain rod including side brackets/ junctions/ wall to wall and pair of decorative finial caps as approved complete all as specified and directed.
M&L 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub bases of floors and pavings etc. finished even and fair without using extra cement complete all as specified and directed
M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed
S&F kitchen PVC cabinet in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18mm thick PVC sheet & provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets SS screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings as per site requirementand as per make and specification mentioned as per drawing and all as specified and directed
S & F auto concealed hinges SS size 103mmx64mmx28mm suitable for cabinet and wardrobe all as specified and directed
S&F ball catches with 8 mm dia steel ball and brass body and strike plate magnet ball catcher for cup board shutters complete all as specified and directed .
S&F 100mm long stainless steel, hasp and staple, safety type, with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and directed.
M&L for provn of roof treatment with polymeric water proofing membrane all as given below:- (a) Dismantling of existing roof treatment and cleaning of prepared roof surface by washing and rubbing etc. (b) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.4 Iit/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) Applying a tack coat of hot blown grade 85/25 @ 1.2 kg/Sqm over APP membrane. (f) M & L for two coats of aluminium paint @ 0.10 litre/Sqm (each coat) on membrane surface all as specified and directed Note :- PCC padding or rendering as required for smooth roof surface shall be measured and paid for seperately under relevant item
M&L 10mm thick screed bed or bedding layer in CM 1:4 using 100% coarse sand over roof slab, finished surface even and smooth without using extra cement and mixed with 3% integral water proofing compound complete all as specified and directed. NOTE: (i) WPC shall deemed to be inclusive in quoted unit rate. (ii) Wherever screed bed shall be provided, PCC padding shall not be provided.
M&L for provn of roof treatment with polymeric water proofing membrane on verticle surface all as given below:- (a) Dismantling of existing roof treatment and cleaning of prepared vertical surface by washing and rubbing etc. (b) M&L 10mm thick rendering in CM 1:3 using 100% coarse sand over wall, finished surface even and smooth without using extra cement including and mixed with 3% integral water proofing compound complete as directed. (c) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.25 Iit/sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M&L 10mm thick rendering in cement mortar 1:4 by mixing polymer based liquid water proofing compound as per manufacturer's instructions complete all as specified and directed.
M&L PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs /benching or mud stops, rounded,chamfered on edges including necessary use and waste of form work etc all as specified
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.
M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.
All as per item no 94 above but for one 5 pin 5 Amp socket outlet point on an independent board.
All as per item no 94 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.
All as per item no 94 above but for one Call bell / buzzer point controlled by one bell push
All as per item no 94 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.
S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.
S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.
S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.
S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 15/16 Amp, 230 volts complete all as specified and directed.
S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.
S&F bell push single pole one way 5 Amp 230 volts complete all as specified and directed.
S&F in repair ceiling fan regulator, electronic, rotary step up socket type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.
S&F Call bell (Ding dong) AC single pole 230 Volts complete all as specified and as directed at site.
S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and as directed at site.
S&F in repairs double door TPN 4 way double door suitable for MCBs, 415 V, 200 Amps rated Busbar, inter connection link, cable ties, earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed . ( Note: MCBs to be measured and paid separately)
S&F MCB 63 Amps 415 volts, 4 pole complete all as specified and directed.
S&F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 16 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.
S&F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.
S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
S&F MCB, single pole & neutral 40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
Supply & fix modular type AC power unit with a two pin and earth plug and socket complete with one single pole MCB 20 A complete all as specified & directed.
S&F 9 watt LED Lamp complete all as specified and as directed
M&L for two single core PVC insulated FRLS cable 6.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)
M&L for two single core PVC insulated FRLS cable 4.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)
Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as specified and directed by Engr-in-charge. Make Phillips Smart brite cat no BN 021 LED 22S 6500 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS22WLED865SPCWH/ Bajaj LED batten BCLAB 20W WH LED P
Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed. Make: Philips Vista glow ordering code : WT140W LED7S NW PSU S1 PC./ Bajaj wee plus cat no BIBWP 6W LED/
Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.Make:Phillips smart brite cat no BN 021 LED 12S 6500/4000 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS10WLED865SPCWH/ HPL Neptune plus 10 w HLPT51510CW
S&F LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts. Make philips Green line smart cat noBRP042 LED 25 CW R1 S1 PSU GR/ Bajaj Edge nxt LED cat no ENXT P 24L WH CR PC SD/ Eveready Mini might cat no LED SL025157-02
S& F in repair Decorative wall light fixture wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Make Phillips Model Grace or / Havells decorative model Floretine WL 1LS B22 SS PPCP cat no LHFOAJE1TN1I060 ( Note: Rates incl 01X 7/9 W LED Bulb with each fitting)/Jaquar lighting
Taking down carefully ceiling fan/exhaust fan of any capacity from any position by disconnecting all connection and removing from site and deposited in MES store yard of AGE EM West complete all as specified and directed.
Taking down carefully electric meter of any capacity from wall or any position by disconnecting all connection and refixing the same including all electric connection and acessories as required including new wooden board of suitable size complete all as specified and directed.
S&F ceiling fan 1400mm sweep, BEE star rated (40-48 W), Min air delivery 215 CFM, copper wound, AC single phase, 230/240 volts white colour complete with fan motor, blade, down rod, canopy and provn of connection with three core flexible copper wire cable of size 1.50sqmm from ceiling rose to fan complete all as specified and directed. Make: Orient (Energy Star) or Usha (Energy saving technix plus) or Havells (Energy saving mode ES neo)
S & F water heater storage type electric BEE 5 star rated of capacity 25 ltrs to operate on 230 volt AC, 2000 watt vertical type including 2/4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos heavy duty PVC flexible pipe of size 15 mm, 450 mm length & suitable plug top of 16 Amp capacity complete all as specified and directed. Make:- Usha Misty/Racold CDR DLX/ Bajaj Montage/ Havells Monja DX NOTE:- Product must have 2 years warranty on heating element & 5 years warranty on inner tank.
S & F in replacement of exhaust fan single phase, 230/240 Volt heavy duty metalic body of size 300 mm sweep 1400 RPM with suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed by Engr-in-charge. Make:- Usha(Turbo heavy duty metal body)/Havell's (Turbo force HP)/Orient (Heavy duty) NOTE:- Old exhaust fan shall be deposited in AGE E/M yard
Supply and fixing in repair exhaust/fresh air fans 250 mm sweep (white) plastic body with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection, fitting on wall including all necessary fixing accessories complete all as specified and as directed . Make Crompton Ventilus/ Havells Ventil Air DX/ Usha Crisp Air LX
Supply and fixing in repair FTL with ultra bright crystal LED tubelight, 18 W ,6000 K with high efficency, with neccessary electrical connection incl disconnection old elecronic ballast if any complete all as directed. Make: HAVELLS with cat Part No. CRYSTAL1213T8DSTL20WLED865SGLASS, Phillips LED Glass tube cat no Essential LED tube 1200mm 20W 865 T8 IND,
S&F in repairs of surface type round LED 12W downlighter all as per specified and directed. Make: Havells Integra neo (surface) cat part no: Integra neo surface DLS15WLED840S/ Phillips sleek surface SM250 & SM251 (Circular)/ Bajaj sleek surface LED cat no. BGSLO SLEEK SURFACE 12W WH RD
S & F in repairs integrated LED type Post top lantern with high power 25/30 W LED as light source, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution,spun auminium landscape lumainaire incl LED driver complete and incl neceesary electrical connection all as directed Make: Havells Ruby clear with cat Part No.RUBYPT25WLED757PSYMTOPC , Make: Surya ETOPP,Bajaj ARIAN cat no BGCTN 25W LED WW
Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminum condector served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 10 Sq mm 2 core stranded conductor nominal cross section all as directed by Engr - in - Charge.
Excavating in trenches in soft/loose soil n.exc 1.5m wide and n. exc. 1.5m depth for foundation etc. and getting out in soft/ loose soil complete all as specified and directed.
Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/ loose soil complete all as specified and directed.
Removing surplus excavated material soils exc 50m but n. exc 100m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
M & L for sand cushioning to under ground cable 8cm deep before laying and 15cm deep after laying cable complete all as specified and directed
Supply and laying of sub class 'B' bricks old size laid flat over the cable as protection of cable complete all as specified and directed.
Supply and fixing in repair FTL fittings with decorative LED batten made up of aluminium casting 18/20 W of size complete standard fittings and fixtures including fixing on walls/roofs/ through MS downrod suspended type with fitting arrangement including neccessary electric connection from ceiling rose to luminaries with suitable size PVC cord complete all as directed. Make: HAVELLS with cat Part No. REGALBATTEN8UPTO1X22WDSBSWH ,Eveready model Easylite box cat no INBOXFR1X18W,HPL LED legacy cat no HLPLEDT820(CW)
M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to galvanised earth lead wire 4.0mm dia ( upto 7.50m) by means of bolts, nuts, check nuts & washers of galvanised iron or steel, earth lead wire protected by 15mm dia GI pipe light grade, 20mm dia light grade GI pipe for watering, meshed funnel, alternate layer of charcoal and common salt complete all as SSR Item No. 19471 and shown in electrical plate No. 3 of SSR part-I with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way in lieu of CI pit cover and protection including necessary excavation and earth work complete all as specified and directed.
M K Engineers and Contractors
suniltraders
M/s Bhadoria Associates
RAJEEV AND ASSOCIATES
EVEREST CONSTRUCTION
QUALITY CONSTRUCTIONS CO
M/S KAUSHIK CONSTRUCTION
m/s raghubar dayal
M/S NITISH ASSOCIATES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .