Miscellaneous Civil works

Amount

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade on steel windows at AMD office complex

Providing mixing and applying SBR polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement : 4 graded course sand with polymer minimum 2% by weight of cement used) as per specification and direction of engineer in charge Note : Measurement and payments : The pre measurement of thickness shall be done just after the surface preparation is completed and payment under this item shall be made only after proper wet curing has been under this item shall be made only after proper wet curing has been done

25mm average thickness in 2layers

50mm average thickness in 3 layers

Dismantling Of area 3 sq. metres and below doors, windows and clear storey windows (steel/wood) shutter including chowkhats, architraves, hold fasts etc. complete and stacking within 100m lead (full windows) Of are a beyond 3.00 Sq.M all complete as per specification and as directed by Engineer.

Providing and laying of 1st quality colour ceramic glazed wall tiles conforming to IS15622 in dados of approved shades, pattern, design & colours including darker shade for required height portion as per approved pattern and design of any size 320 x 480mm / 300x600mm / 300x450mm manufactured by M/s Khajharia, M/s RAK Ceramics M/s Bell Ceramics, NITCO or Johnson or equivalent approved make laid over 20 mm or more thick cement mortar 1:3 (1 cement : 3 sand) bedding / backing and fixing the tiles with cement slurry and pointing the joints with matching colour Tile Grout compound of ROFF/Balendura finished to line, level, slope, and plumb including cutting of tiles, making cut outs / opening wherever necessary, wastage, final cleaning of surfaces as required, curing etc., complete with cost of materials, labour, tools & plants, scaffolding all as per specifications and directions of engineer-in-charge.

Providing and fixing Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Providing and fixing clear float glass panes of 4.0 mm thicknessglazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item):

Providing and laying 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

In lime mortar

In cement mortar

General Note- 1. Contractor shall inspect the site to acquaint with the site condition as welll as security condition at AMD. 2. The rates shall include cost of tools and tackles, manpower including wages, liveries, all wastage and taxes, GST, labour cess, income tax etc, as applicablebut exclusive of EPF & ESI. EPF & ESI are reimbursible as per relevant clause.

OMSAIAJCONSTRUCTION