Co Judicial Court Complex at Arki Tehsil Arki Distt. Solan H.P SH Providing Electrical installation therein

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group-C

Wiring for twin control light point with 1.5 Sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit, 2 way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group-C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following size of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed, Steel/PVC conduit as required.

3x1.5 Sq. mm.

3x4.0 Sq. mm.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-25 mm. dia

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface / recessed Steel/ PVC conduit as required. 1 run of cable

Supplying and fixing of 1 module UTP cat 6E information outlets toolless system for data and voice complete with connections, testing and commissioning etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required

Supplying and fixing metal box for 8 module along with modular base and cover plate on surface/recess including providing and fixing 3Nos of S.P. 5 pin 5/6 amps modular socket outlet and one No 5/6 amps,modular type switch, connections, painting etc. as required.(Computer Point)

Supplying and fixing Call bell / buzzer suitable for single phase,230 volts complete as required:-

Providing and installation of following surface mounting slim square/round type LED downlight in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, Bajaj,C&S, Panasonic or any other approved by Engineer-in-Charge.

Square/round LED Panel Light 6/7W Surface

Square/ round LED Panel Light 10/12 W Surface

Square/ round LED Panel Light 15 W Surface

Square/ round LED Panel Light 18 W Surface

Square/ round LED Panel Light 24 W Surface

Square/ round LED Panel Light 32/36 W Surface

Supplying and fixing of following LED bulk head fitting with all accessories including making connections, testing etc. as required. Make C&S, Philips, Panasonic or any other approved by Engineer-in-Charge.

LED bulk head 10W

Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V,50/60Hz, complete with all accessories, including mounting clamps,connections, testing etc. as required: of Approved Make

LED Batten Light 20/22W

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Providing and installation of following type of LED retrofit Lamp B-27 holder base with polycarbomate diffuser and aluminium heat sink including connections, testing and commissioning etc. as required. Make: Philips, Syska, Havelles,C&S, Panasonic or any other approved by Engineer-in-Charge.

Supplying and fixing of fancy Mirror lights containing LED/ CFL lamp holder(s) of all sizes and shapes, complete with all accessories but excluding LED/CFL lamp including making connections, testing etc. as required. Make:Philips , Jaquar , Havells or any other approved by Engineer-in-Charge

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required: Make Havells, Crompton greaves, Usha, or any other approved by Engineer in charge

Ceiling Fan 900 mm sweep

Ceiling Fan 1200 mm sweep

Ceiling Fan 1400 mm sweep

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required.Make Usha or at par in Crompton greaves, Havells or any other approved by Engineer in charge.

10 Liter capacity water heater (Cat-A)

35 Liter capacity water heater (Cat-A)

Supplying and fixing of LED street light 45 W versatile pressure die-cast alluminium housing with UV stablized PC IP diffuser for better light distribution alongwith electronic driver,complete with all accessories including making connections, testing etc. as required. Make:- C&S, Wipro, Philips, Panasonic, or any other approved by Engineer-in-Charge.

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:- 32 mm dia. G.I. pipe, heavy class

Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required. Make :- Usha or at par in Crompton greaves, Havells or any other approved by Engineer in charge.

Exhaust Fan, Light duty, (Domestic) 230 mm sweep

Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: Make Usha or at par in Crompton greaves, Havells or any other approved by Engineer in charge.

Exhaust Fan, Heavy duty, 300 mm sweep

Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Make Hager,Schenider, Havells,L&T,ABB or as approved by Engineer-in-Charge.

Single pole

Supplying and fixing Higher Rating (80 to 125A) 240/415 volts,10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.MCB DP 50/63 A 'C' curve.Make Hager,Schenider, Havells,L&T,ABB or as approved by Engineer-in-Charge.

Supplying and fixing following rating, double pole, (single phase and neutral) 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 Amp.Make Hager,Schenider, Havells,L&T,ABB or as approved by Engineer-in-Charge.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make Hager,Schenider, Havells,L&T,ABB or as approved by Engineer-in-Charge.

8 way , Double door

12 way , Double door

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

5/6 amps switch

3 pin 5/6 A socket outlet

Telephone socket outlet

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing of chemical earhting system consisting of copper earthing electrode of 3 mtr length,50 mm dia with 2 bags of ground enhancing coumpound incluing making connections,testing etc as required.Make Uniearth/ABB or make approved by engineer-in- charge.

Providing and fixing 6SWG dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required

Providing and fixing 25 mm X 3mm copper strip on surface or in recess for connections etc in as required.

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.Make KEI, Havells,Polycab,or as approved by Engineer-in-Charge.

Armoured cable 16 sq. mm (four core)

Armoured cable 25 sq. mm (3.5 core)

Armoured cable 35 sq. mm (3.5 core)

Armoured cable 400 sq. mm (3.5 core)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930,Part II complete with fitting and cutting, jointing etc. in the existing trench,complete as required.Make Astral/Precesion/Supreme or any other approved by Engineer-in-Charge.

160 mm dia (OD-160 mm & ID-135 mm nominal)

SITC of 1.5 Ton Hot and cold split type AC( 3/4 star rating) copper condenser including stabilizer and making connections testing etc.complete in all respects.Make ( , Blue Star , LG, Hitachi, O General, Daikin, Mitsubishi, LG or any other approved by Engineer-in-charge.

SITC of voltage Stablizer for split type wall mounted Air conditioner including making connections testing etc. complete in all respects. Make:- V-Guard , Voltas , LG, Mitsubishi, Microtek or any other approved by Engineer-in-charge.

Supplying and fixing of Copper refrigerant piping with sleeve 1/2x1/4 inches with control cabling beyond 0 running meter for (Hi-wall split unit) with sleeves insulation etc. complete in all respects with best satisfaction of Er-in-Charge.

Supplying and fixing of PVC drain pipe for (Hi-wall split unit) complete in all respects with best satisfaction of Er-in-Charge.

Supplying and fixing of M.S stand for out door unit of suitable size (Readymade) complete in all respects with best satisfactions of Er-in-Charge.

Supplying and erection of following depth sheet metal cubical panel(pedestal)of suitable dimension thick m.s angle iron frame, covered with 1.6mm thick m.s. sheet duly welded an five side and front side hinged complete with locking arrangment with sufficient no vertical and horizontal intermediate switch gear supporting members each of M.S. of suitable length duly welded. The cubical pedestal have cable entry box at one or two side and 4 nos. legs of M.S. angle iron each etc. long i/c power coated painting and bonding to the existing earth etc. The cubical pedestal consists of following switchgear units (S/F 1No. MCCB 500/630Amp F/Pole Main control, 1 No. MCCB 250 Amp F/Pole for main heating feeder,2Nos. MCCB 100 Amp F/Pole heating, 2Nos. MCCB 63 Amp. F/Pole heating, 1 No. 250 Amp changeover switch F/Pole for D.G. supply, 1 No. MCCB 200 Amp F/Pole for main lighting feeder, 7Nos. MCCB 32Amp. Amp F/Pole lighting , copper bus bar 600 Amp, 300 Amp, 200 Amp, VAF Meter Digital, CT 600/5 and indicators complete in all respects)

Supplying and erection light sub- panel 100 Amp made from 1.6mm thick M.S. sheet steel duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement to house 100Amp. MCCB with 100 Amp Copper busbar & 1 set RYB light indicator and cable alley as required complete in all respects including the cost of switchgears. The cubical pedestal shall have cable entry box at one side, with epoxy powder coated approved paint and bonding to the existing earth etc.

Supplying and erection light sub- panel 63 Amp made from 1.6mm thick M.S. sheet steel duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement to house 63 Amp. MCCB with 100 Amp Copper busbar & 1 set RYB light indicator and cable alley as required complete in all respects including the cost of switchgears. The cubical pedestal shall have cable entry box at one side, with epoxy powder coated approved paint and bonding to the existing earth etc.

Supplying and erection light sub- panel 32 Amp made from 1.6mm thick M.S. sheet steel duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement to house 32Amp. MCCB with 100 Amp Copper busbar & 1 set RYB light indicator and cable alley as required complete in all respects including the cost of switchgears. The cubical pedestal shall have cable entry box at one side, with epoxy powder coated approved paint and bonding to the existing earth etc.

Supplying & fixing, testing, commisioning of storage type water cooler with reciprocating compressor of ISI marked, environment friendly new age refigerant of rugged stainless steel/ galvanized steel body. Total storage capacity 80 Lt. and cooling capacity 40 Lt/Hr with 2 Nos of faucets and all accessories etc. . Make Usha, Blue Star, Carrier or its equivalent make.

Supply, Installation, testing and Commissioning of Early Streamer Emission, Air Terminal compliant to the last NFC 17 - 102:2011 standard. The Unit should be autonomous, with an electrostatic activation adapted to the earth electric field, warranted for 7 years by the manufacturer. The air terminal shall be made of+B16 non-corrosive materials. It shall be equipped with a central rod made of stainless steel 316L for a better conduction and a low corrosion factor. Performances of the unit should be certified in High Voltage and High Current Laboratory (CPRI and GERAC) as well as in real lighting conditions. The unit should have been tested in rain condition in order to ensure the good insulation of the emission device (the insulation should not be lower than 97%). The unit should have passed electrical test at 200 kA in 10/350μs waveform. Make:-FRANCE PARATONNERRES Ioniflash Mach NG 60/ABB or its equivalent approved by the Engineer-in-charge,

Supply, Installation, testing and Commissioning of Elevation pole made of G. I. of 5 meter height with a dia of 50mm with a M20 thread at the top to fix the unit. Base Plate, clamps and all required fixing should also be supplied. Guy wires may be used in order to ensure the stability of the installation.

Supply, Installation, testing and Commissioning of Down Conductor made of copper for lower impedence. It should be a single core cable of minimum cross sectional area of 70 mm².

Installation of a lightning strike counter on the down-conductor. The unit should be autonomous and compliant to the IEC 62561-6. The counter should be able to register the lightning events from 1 KA to 100 KA. The counter should be at least with the index protection IP66. Make:-FRANCE PARATONNERRES/ IONICOUNT/ABB or its equivalent approved by the Engineer-in-charge,

Providing the earth pit cover with dimensions 300 mm x 300mm x 220mm of heavy duty type made of FRP with a openable lid for periodic inspection of the earth pit.

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Bhardwaj Electrical Co.

Kalra Hardware and Electric Store