Loading
Loading…
Loading…
Tender Value
₹26.5 L
EMD Value
₹53,000
Closing Date
1 Sept 2026, 6:00 pm7d left
Maj Rohit Gogoi
GE 859 EWS
PROVN OF PERMT CONSTR OF TOILET CUM BATHROOM FOR TPS AT 384 COY ASC (SUP) EWS AND SPECIAL REPAIR AT DET 21 MTN DOU (AP NNB) UNDER GE 859 EWS
2026_MES_784200_1
9074/E8
Open Tender
Civil Works
Item Rate
180 days
Tawang
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹53,000
Yes
12 Aug 2026
12 Aug 2026
2 Sept 2026
12 Aug 2026
1 Sept 2026
25 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete. | 109 | Sqm | - | - |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed. | 10 | Cum | - | - |
| 3 | Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed. | 7 | Cum | - | - |
| 4 | ditto as above item No 3 above but for each additional 1.5 m or part there of in depth beyond the first 1.5 m complete. | 5 | Cum | - | - |
| 5 | M&L for cement concrete 1:4:8 type D2 (40 mm graged aggregate) as in foundation and filling mass concrete complete all as specified and directed by Engr-in-Charge. | 2 | Cum | - | - |
| 6 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. | 400 | Kgs | - | - |
| 7 | S&F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. | 50 | Kgs | - | - |
| 8 | Use and waste flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr-in-Charge. | 10.8 | Sqm | - | - |
| 9 | Use and waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed by Engr-in-Charge. | 9 | Sqm | - | - |
| 10 | Use and waste Square, Rectangula or polygonal Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed by Engr-in-Charge. | 15 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.23 MB
Tender9074.pdf
Tender Documents • 1.27 MB
BOQ_878654.xls
BOQ • 0.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].