IMPROVEMENT TO CERTAIN SMQ BLOCKS (PH-II) AT 13 BRD UNDER GE (P) AF GURGAON

Amount

Taking down cement plaster from wall and ceiling of any description from brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with water, etc., and removing same from the site(s) complete all as specified and as directed. Note :- Quoted rates shall be included upto four storey building including scafolding and all safety measures

M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces including finishing even and smooth without extra cement complete all as specified and directed.

M&L for 10mm thick rendering on concrete surfaces as in ceiling finished even and smooth without using extra cement in cement mortar 1:4 by using manufacture/washed stone yellow/grey sand complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm thick cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm thick cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note:- Payment for providing grooves shall be made separately under respective item of this schedule.

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.

Demolition of cement concrete not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and directed. Note :- Quoted rates shall be included upto four storey building including scafolding and all safety measures

M&L for re-baring by drilling holes and fixing nozzle if required in existing concrete/brick work as in column, beams, slabs and foundation etc in any position and any description size of hole 14mm, 16mm & 22mm suitable for dowels of size 10mm, 12mm & 16mm respectively (minimum depth 140mm for 10mm & 12 mm dia bars and 180mm for 16mm dia bar, cleaning the surface properly with blow out pump & round brushes and fixing of dowel bars with epoxy resin (resin+hardner of make: Sika/Fosroc/Concressive 1450 of BASF complete all per manufacturer instructions,specified and directed by Engr-in-charge. Notes:- (i) Adequate lap length shall be provided as per IS-456-2000. (ii) Reinforced TMT bars where incorporated in work shall be measured and paid seperately under respective item of this schedule. (iii) Quoted rates shall be included upto four storey building including scafolding and all safety measures.

M&L for RCC 1:1.5:3 type A1 using 20mm graded stone aggregate as in beams, columns and chajja etc. in patches complete all as specified and directed.

M & L for RCC 1:1.5:3 type A1 using 20mm graded stone aggregate as in roof slab supported on wall, beams and column etc. complete all as specified and directed.

M&L for form work to soffits of suspended slab such as roof slab, floor slabs, chajja, landings and similar work not exce 200mm thick (horizontal or slops) for rough finished flat surfaces complete all as specified and directed.

M&L for form work to edges of concrete flat, roof slabs and chajja not exceeding 200 mm thick for rough finished surfaces complete all as specified and directed.

M&L for form work to slab sides and soffit of beams,columns, slabs, chajja, landings and similar work for rough finished flat surfaces complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping etc and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 14 here-in-before but 6 to 8mm dia.

All as per item No. 14 here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups spacers and binder etc complete all as specified and directed.

M&L for mild steel angle iron work as in jacketing of existing column by cutting welding making holes and fixing by using angle iron/flat iron of FE-410 W grade complete including necessary scafolding upto four storey building complete all as specified and directed.

M&L for guniting of RCC works in coloum, beams, slabs, ceiling,chajjas,facia, landing, balconies etc by removing loose concrete including plaster, cleaning of surfaces with wire brushes and supply and fixing welded steel wire mesh 25 mm x 50 mm with 3 mm dia steel wire as facias/drops amd similar works etc and applying an epoxy resin concrete bonding agent treatment over the old concrete surface to bond with the new concrete with Nitobond EP of M/s Pidilite/M/s BASF (as per manufacurers instruction) to bond old and new concrete, guniting with minimum pressure of 2.5 Kg per Sqcm in two layers of total average thickness shall be 40 mm thick with cement mortor (1:2) using ordinary portland cement of 43 grade mixing with waterproofing admixture polycrete @ 2% by weight of cement complete all as specified and directed. 'Note :The following items shall be deemed to be included in quoted rate. (i) Provn of required dia of TMT reinforcement bars and binding/welding with old bars. (ii) After placing the reinforcement all concrete surface shall be throughly scrubbed with brush, washed with water and allowed to dry for guniting/concreting/plastering. (iii) Work is to carried out in patches. '(iv) Rate for scaffolding etc shall be deemed to be included in quoted rate. '(v) Guniting from ground floor to four story building. (vi) Anti-corrosive protective coating for old reinforced bars. (vii) Finish the top surface of guniting even and fair with truly horizontal/vertical as directed.

Dismantling of existing roof tiles/roof treatment from roof and parapet of any description and removing the rubbish complete all as specified and directed.

Cleaning top surfaces by brooming, wire brushing, removing grass/mud Phuska of any thickness, raking out joints to receive plaster and removing debris, grass etc outside the defence land complete all as specified and directed. Note :- (i) Plaster shall be measured and paid separately under appropriate item of Sch ‘A’. (ii) Rate of this item is inclusive of disconnect fitment at water tank or solar heater etc and refixing in the same position after completing of roof treatment.

M&L for 15 mm thick cement plastering in cement mortar 1:4 on brick/concrete surfaces of roof and parapet, mixed with water proofing compound, finished even and smooth without using extra cement (Including 4 Story building) complete all as specified and directed. Note :- Water proofing compound shall be measured & paid separately.

Supply only liquid water proofing compound

M&L for roof treatment by applying PU & Acrylic based Elostomeric Coat in UV shafe having OVOC coating apply two coats as per manufacturer's instructions to protect roof over clean plastered surface complete all as specified & directed. Make :- SIKA/FOSROC/STP/CHOKSEY CHEMICAL/APURVA INDIA/BOSTIK INDIA/STP/MARUTI BITUMEN. Note :- Water proofing gurantee for 10 years shall be included in the quoted rate.

M&L PCC 1:2:4 type B-0, using 12.5mm graded stone aggregate as in roof coving/benching and bed block, plateform etc complete all as specified and directed

Demolition of brick work or stone/boulders masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etac but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description, not exc. 150mm thickness of floor etc and removing the same from Site(s), complete all as specified and as directed.

M&L for applying evenly two coat cemetious/liquid waterproofing coating as per manufacturer instructions including cleaning surface complete all as specified. Make :- SIKA/FOSROC/STP/CHOKSEY CHEMICAL/APURVA INDIA/BOSTIK INDIA/STP/MARUTI BITUMEN. Note :- Water proofing gurantee for 10 years shall be included in the quoted rate.

M&L for PCC 1:5:10 type E2 using 40mm graded stone aggregate as in filling under floor/sunken slab complete all as specified and directed.

M&L for pre construction anti termite treatment to the top surface of filled earth and the soil under plinth protection at the rate of 5 litres of emulsion per square complete all as specified and directed.

M&L for anti termite treating along the the external perimeter of building by using emulsion @2.25 Ltr/Rm of external wall perimeter complete all as specified and directed.

Dismantling of floor, hearth, or wall tiling/terrazo cast in situ including cement mortar bedding ( but not backing) including removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4 using 20mm graded stone aggregate) , as in floors, etc., and finished the cement concrete surfaces even and fair with using extra cement complete all as specified and directed.

M&L for non–skid ceramic coloured tiles of size 300x300x7mm laid on floor over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300x450x7mm to 8mm set on vertical surfaces such as skirting, dado, etc over and including 10mm thick rendering in cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed.

Roughening of existing concrete surface including cleaning, sweeping and washing all debris/dust and applying cement slurry to receive floor finish complete all as specified and directed.

M&L for glazed/matt finish ceramic joint free coloured tiles 8 to 10mm thick exc 0.11 sqm and n.exc 0.18 sqm each tile in floors etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 as in floor and skirting complete all as specified and directed. Note :- The quoted rate included the cost of removal and refixing of door shutter wherever required.

M&Lfor ceramic joint free coloured tiles, size 400x100/150mm x10mm in size,laid vertical and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tilesover and including 15mm thick rendering as in skirting in cement mortar 1:3 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick laid over and including 15mm thick screed bedding layer in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed.

M&L for 20-25 mm thick Kota stone slab single piece in steps of stairs, with groove and rounding on nosing, laid over cement screed and jointed including 10mm thick screed bed in cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the kota stone complete all as specified and directed.

M&L for broken stone/broken bricks hard core of gauge n exc. 63mm filling under floor , hand packed tightely including spreading leveling, watering and well ramming in required level complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 Type C2 (using 40mm graded stone aggregate) as in plinth protection and paving, including finishing top surfaces even and smooth/fair with out using extra cement complete all as specified and directed.

M&L for chequered cement concrete tiles 30cmx30cmx25mm thick pre printed colour , set and jointed in neat cement slurry with grey cement and pigment over and including screed bed 15mm thick in cement mortar 1:6 as in path complete all as specified and directed.

S&F SDR 11 CPVC pipe 20mm dia fixed to concealed/wall, ceilling,laid in floor etc incl all fittings fixed with solvant and brass threaded fittings for fixing taps etc including taking down unserviceable 15mm dia steel water tubing with fittings and connections, etc. complete all as specified and directed.

S&F SDR 11 CPVC pipe 25mm dia fixed to concealed/wall, ceilling,laid in floor etc incl all fittings fixed with solvant and brass threaded fittings for fixing taps etc including taking down unserviceable 15mm dia steel water tubing with fittings and connections, etc. complete all as specified and directed.

S&F galvanised dteel water tubing 15mm Bore (dia), ‘Medium Grade’ with all fittings, fixed on Walls, ceiling or laid in floors fixed with clamp including taking down unserviceable steel water tubing with fittings and connections, etc. complete all as specified and directed.

S&F galvanised dteel water tubing 20mm Bore (dia), ‘Medium Grade’ with all fittings, fixed on Walls, ceiling or laid in floors fixed with clamp including taking down unserviceable steel water tubing with fittings and connections, etc. complete all as specified and directed.

S&F pillar taps 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly-nuts, screwed for iron pipe and fixed-in-repairs complete all as specified and directed.

S&F angle stop cock 15mm bore (dia), chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed-in-repairs complete all as specified and directed.

S&F stop valve CP 15mm bore, cast copper alloy, screwed down, high pressure with long shank and capstain head screwed both ends for iron pipe or union and fixed in repairs complete all as specified and as directed

S&F 15mm bore (dia), chromium plated bib cock with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed-in-repairs complete all as specified and directed.

M& L for vitreous china squatting pan ‘orissa’ pattern, size 580x440 mm white, with ‘P’ or ‘S’ trap, integral foot rest, providing joints between flush pipe and socket of WC pan (excluding flushing cistern and flush pipe), fixing with and including provision of 150mm thick lime concrete bedding including taking out unserviceable WC pan and connected items complete all as specified and directed.

S&F PVC flushing cistern 10 litre capacity, low level valve less, syphonic action type, white, with inlet, ball valve, float and handle including connection to pipe, PVC flush pipe of polythene 32mm dia suitable for Indian WC and fixed including taking down/out unserviceable flushing cistern and connected items complete all as specified and directed.

Taking down the PVC flushing cistern flushing cistern and refixing the same after replacement of ball valve, float, handle and PVC flush pipe of polythene 32mm including connection to pipe,after cleaning of scaling etc complete all as specified and directed.

S&F in repairs vitreous china wash hand basin 550x400mm in size, white (flat back type) with 32mm dia brass chromium plated waste fitting, UPVC 32mm bore waste pipe, a pair of cast iron brackets duly painted/ erecting stand including cutting and pinning in ends, making good disturbed surfaces in cement mortar 1:3 and fixed complete all as specified and directed.

Taking down and refixing old wash basin including 32mm dia brass chromium plated waste fitting, UPVC 32mm bore waste pipe, a pair of cast iron brackets duly painted/ erecting stand including cutting and pinning in ends, making good disturbed surfaces in cement mortar 1:3 and fixed complete all as specified and directed.

S&F in repair 100 mm size chromium plated shower rose fancy type fixed to 15 mm bore pipe complete all as specified and directed.

S&F in repair 1000 ltrs rotational moulded 3 layered polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provn of tank nipple, union etc and fixed complete all as specified and directed.

S&F in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete complete all as specified and directed.

S&F 20 mm bore gun metal half turn valves with steel lever screwed both ends fixed-in-repairs complete all as specified and directed.

S&F 15mm dia PVC connections pipe 450mm long high pressure with Brass CP check nut and washer complete all as specified and directed.

M&L for replacement of 100mm CI floor/nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate and testing after repairs and taking down existing trap etc complete all as specified and directed.

Dismantling of soil and waste pipe of any description, jointed in cement mortar and taking out of trenches/wall if required up to 75/100 mm dia pipes complete all as specified and directed.

S&F 75mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and directed.

S&F 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and directed.

S&F 75mm dia CI bend diminishing pieces or tapers complete all as specified and directed.

S&F 75mm dia CI bend with oval access door, diminishing pieces or tapers complete all as specified and directed.

S&F 100mm dia CI bend, diminishing pieces or tapers complete all as specified and directed.

S&F 100mm dia CI bend with oval access door, diminishing pieces or tapers complete all as specified and directed.

S&F 75mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches complete all as specified and directed.

S&F 100mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches complete all as specified and directed.

S&F 75 mm dia vent cowl and fixed in position complete all as specified and as directed.

S&F Stainless Steel Kitchen Sink with of Overall Size 495X420mm and Bowl Size 410X330X160mm, made of Stainless Steel 1.0mm thick Sheet with Plugs, Chromium Plated Waste Coupling and Washer including Bedding in Cement Mortar 1:4 to Dwarf Wall or fixing Cantilever Brackets and Connection to Pipe including Taking down unserviceable Sink and Connected Items complete all as specified and as directed by Engr-in-Charge.

M&L in fixed in repairs for steel plate rack size 0.60x0.90 m with 0.9mm thick steel plate complete all as specified and directed.

S&F 4mm thick figured Glass, ordinary quality, glazing as in window fixed with bead/oil putty, not exc. 0.50 Sqm in Each pane and fixed in repairs complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks of mild steel wire stapes fixing in repairs etc complete all as specified and directed.

M&L pre polished granite (any type) slab 20mm thick laid bedded with 15 mm thick cement mortar 1:4 in kitchen plateform laid and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including necessary moulding/rounding and polishing complete all as specified and directed.

M&L for preparation of newely plastered ceiling surface and applying three coats of white wash complete and all as specified and directed.

M&L for preparation of new plastered wall surfaces and apply two coat of exterior emulsion paint 100% acrylic of approved colour and shade by accepting officer complete over a coat of primer over 1 to 2 mm thick birla putty punning including necessary scaffolding upto 4th floor complete all as specified and directed.

M&L for preparation of new plastered wall surfaces including applying two coat of distemper oil emulsion by Auto Roller over a coat of chalk whitening complete with 1 to 2 mm thick birla putty punning including necessary scaffolding upto 4th floor complete all as specified and directed.

S&F pre-laminated particle board 12mm thick, interior grade, pre-laminated on one sides with decorative finished, and other side balancing white lamination fixing as cupboard frame, shelves and shutters works, etc. with necessary fixing arrangements viz jointing cleats, glazing clips, rubber packing, screws, pocket type higes, nobs,etc, as required/ordered at site(s) and fixed in repairs complete all as specified and directed.

S&F pre-laminated particle boards 19mm thick, interior grade, pre-laminated on one sides with decorative finished, and other side balancing white lamination fixing as cupboard frame ,shelves and shutters works, etc. with necessary fixing arrangements viz jointing cleats, glazing clips, rubber packing, screws, pinotype higes, nobs,etc, as required/ordered at site(s) and fixed in repairs complete all as specified and directed.

Taking down door/window frame with shutter of area n exc 1.50 sqm each and removing to store or taken into credit complete all as specified and directed.

Taking down door/window frame with shutter of area exc 1.50 but n exc 4.0 Sqm each and removing to store or taken into credit complete all as specified and directed.

Taking down shutters of size exc 1.00 Sqm but not exceeding 2.00 Sqm complete all as specified and as directed.

S&F in repair mild steel works Fe-410 or 310 as in framed works such as door frame/ grills/ guard bar by using MS box section and MS flats with ends of bars shoulders and or riveted or forged into spikes complete all as specified and as directed.

S&F PVC solid moulded architrave door frame of size 50x47mm & more made out of min 5.0mm coloured with plastic trim decorated PVC sheet reinforced with mild steel square tube as specified manufacture’s instructions complete all as specified and as directed.

M&L for 2nd class factory made hard wood, 35mm thick plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides feather edged or or veneered particle board medium density wood particle board with commercial face veneers and fixed to chowkats complete all as specified and directed.

M&L for 2nd class factory made hard wood, 35mm thick plain framed glazed/skeleton shutters open rebated and prepared to receive glass and wire mesh with beads and fixed to chowkats complete all as specified in SSR Pt I and directed by Engineer-in-Charge.

S&F factory made PVC solid moulded architrave door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rails & bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specifications and drawings, complete all as specified and as directed.

S/F 125mm long aluminium anodized handles fixed to shutter with suitable screws complete all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolt fixed with screw complete all as specified and directed.

S&F mild steel butt hinges 100mm, medium weight, cold rolled ISI marked and fixed complete all as specified and directed.

S&F 300 mm long MS sliding door bolt with hasp, staple (Bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of newely steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc primer complete all as specified and directed.

S&F for 25mm dia MS powder coated curtain rod with decorative nobs on both the end including MS bracket for fixing in the wall by drilling and fixing wooden gutties inclunding remove old rod etc. complete all as specified and directed.

S&F aluminium colour power coated (shade or tint as directed by GE) window/ventilator frame section 100x44x2mm fixed with thrust bolt in walls by drilling (any number of leaf) comprising the following:- (a) Aluminium colour powder coated (shade or tint as directed by GE) four shutter each size 44x44x2mm top/bottom/sides style. (b) Aluminium colour powder coated butt hinges 4 Nos in each window 100 mm sizes as per spd. (c) Aluminium colour powder coated tower bolt 3 Nos in each window 100 mm long as per spd. (d) Aluminium colour powder coated handle 2 Nos in each window 100 mm long as per spd. (e) Tinted glass 4 mm thick with rubber beading Make-Saint gobain /Modigaurd (f) Aluminium anodized colour powder coated grill make deco grill DG-104 fixed with F or H section including stainless steel wire cloth 0.36mm dia and 1.40mm aperture.

S&F aluminium colour powder coated (shade or tint as directed by GE) window frame using Jindal or as approved section No 20032 (61.85x31.75x1.50mm) fixed with thrust bolt in walls by drilling for half bottom and top half with top hung shutter using suitable section with 4mm thick tinted glass as approved complete all as specified and directed.

M&L for preparation and old decorated steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for complete removal of old treatment and preparation of wall surface & applying two coat distemper oil emulsion by Auto Roller over a coat of primer including apply of 1 mm thick birla putty including preparation of surface complete all as specified and directed.

M&L for preparing old treated wall surface & applying one coats of distemper oil emulsion including removing of nails filled with birla putty and match with existing surface complete all as specified and directed.

M&L for preparation of old treated surfaces of wall and applying one coats of exterior emulsion paint (weather proof and dust proof ) including apply of 1 mm thick birla putty for uneven surface and match with existing surface complete all as specified and directed

M&L for preparation of old surfaces of wood or wood based materials over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation and old decorated steel and iron surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint including apply of 3 mm thick birla putty for uneven surface and match with existing surfac complete all as specified and directed.

S&F hold fast,pinel hinges, hand made sliding bolts etc fabricated out of MS flat cleat for securing purlins and similar small articles complete conforming to Fe-410 etc.

M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in for fixing hold fast, bed block including necessary form work complete all as specified and directed.

Taking down existing water tank of capacity 250 to 500 Ltr and refixing after necessary cleaning/water proofing treatment on roof surface including replacement of tank nipple etc complete all as specified and directed.

Removal of debris/malwa to a distance exc 10Km but n exc 15 Km and depositing out side the MD land and as directed by Engr-in-charge. Note :- Place for removal of earth/debris shall be decided by the contractor and necessary gate pass for removal of earth will be given by the Engineer-in-Charge all these parameter shall be included in quoted rate.

Taking down copper/aluminium point wiring (light points) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for the above items should be made as per conditions seperately) and making good disturbed surfaces of walls. floors, etc. complete all as specified and directed.

Taking down unserviceable/burnt, copper/aluminium submain wiring complete including conduits of any kind and removing materials to store for keeping in safe custody or for taking credit (credit for the above items should be made as per conditions seperately) and making good disturbed surfaces of walls. floors, etc. complete all as specified and directed.

Material and labour in replacement for point wiring (concealed) in and including rigid non metallic PVC heavy duty conduit, 19/20 mm dia/suitable size as per site reqmt including cutting chases for conduits, sinking for boxes for concealed conduit wiring with 1.5 sqmm FRLS PVC insulated unsheathed multi stranded copper conductor cable in and including flush type metal boxes modular type suitable for fixing modular switches, sockets, fan regulators etc with brass screw, cup washer and including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as earth wire connected to common earth and earth dolly as per IS specification and as specified for the One light/fan/bell point controlled by one switch.

All as per item No. 114 above but for 05 Amps bell point.

All as per item No- 114 here-in-before but for one 3 pin socket outlet 5 Amps,on the same board.

All as per item No-114 here-in-before but for one 3 pin socket outlet 5 Amps, independent board.

All as per item No- 114 here-in-before but for one 3 pin socket outlet, 15 Amps, on the independent board with cables 2.5 Sqmm.

All as per Ser item No.114 above but for point controlled by two numbers two way switches complete all as specified and as directed.

Supply and fixing ceiling rose 2 to 3 terminals complete all as specified and as directed.

S&F switch modular one module one way type 06 Amp single pole 240 volts complete all as specified and as directed.

S&F socket out let modular type 5 pin 6 Amp 2 modular complete all as specified and directed.

S&F in replacement of switch modular one module two way 06 Amp complete all as specified and directed.

S&F in replacement of bell switch modular one module complete all as specified and directed.

S&F twin socket modular type heavy duty out let 6 pin 6/16 Amps 2 modular complete all as specified and directed.

S&F switch modular type 16 Amps single pole one way 240 volts one modular complete all as specified and directed.

S&F modular fan regulator step type 120 watt 2 modular complete all as specified and directed.

M&L for GI box for fixing of switches 3 modular complete all as specified and directed.

M&L for GI box for fixing of switches 08 modular complete all as specified and directed.

S&F modular white cover plate (inner & outer) 3 modular complete all as specified and directed.

S&F modular white cover plate (inner & outer) 8 modular complete all as specified and directed.

Taking down the existing tubelight fitting any type & make and refixing the same after repair of the bldg on same location complete all as specified and directed.

Taking down water heater storage type electric capacity 25 liters and refixing the same after repair of the bldg on same location complete complete all as specified and directed.

S&F ventilating fan PVC body type 200mm sweep complete all as specified and as directed.

S&F ceiling fan 1200mm sweep 3 blade single phase 5 star energy rating 230V 50 Hz complete with all accessories complete all as specified and as directed. . Make:- Havells/ Philips/ Cropmton

Supply,fixing and testing of Geyser 25 Ltr capacity vertical type, 1500 Watt, smart guard, 5 star rating, three lever safety, rust proof metal body, high pressure resistance , including set of PVC connections of requred length complete all as specified and directed. Make:- Havells(GHWAMJSWH025)/Bajaj/Crompton

S&F sheet metal enclosure for 220 Volts 20 Amps with a three pin and earth plug top with socket and one single pole MCB 20 Amps complete all as specified and as directed.

S&F DB, SPN 415 Volts 08 ways double door complete complete all as specified and as directed.

S&F DB,TPN 415 Volts 04 ways double door vertical type complete all as specified and directed.

S&F MCCB 100 Amps, 3P, 16KA , overload setting adjustable and short circuit setting complete all as specified and directed.

S&F MCB SP-6-32 Amps, 240 Volt B series type complete all as specified and directed.

S&F of MCB SPN-40-63 Amps,240 Volt B series type complete all as specified and as directed.

M&L for sub main wiring two run of 06 sqmm and one run of 6 sqmm continuous earth wire PVC insulated unsheathed copper conductor cable ISI marked 1100V grade drawn in and including concealed PVC conduit suitable size of medium grade fixed on wall/ceiling/passing through wall etc connected as required at site complete all as specified and direcetd.

M&Lfor earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 3mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI wire of dia 4 mm by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No 3 of SSR-2009 (Part-I). Note :-The earth value/result shall be less than 5 ohms.

Excavation in trenches in soft/loose soil not exceeding 1.50 Mtrs wide and not exc. 1.5 Mtr deep and getting out for taking out/laying cable, poles &stay etc complete all as specified and as directed.

Demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed.

Returning, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid tested complete all as specified and as directed by Engr-in-Charge

Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed.

M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable complete all as specified and directed..

M&L for brick laid in trenches for cable protection of burnt clay sub class ‘B’ complete laid dry flat complete all as specified and directed..

M&L for PCC 1:2:4 type B2 using 40mm grade stone aggregate as in copping of electric pole or making good of disturbed surface complete all as specified and directed .

M&L for driling hole hard standing / road for laying of pipe for protection of cable etc by means of manual bookie and without disturbing the top surface or cutting and making good the disturbed surface to the existing if any complete all as specified and directed .

Supply and laying GI tube light grade 40 mm bore complete all as specified and directed.

Taking out old unserviceable underground cable of 1100 Volts grade with stranded aluminium conductor of following size from excavated trenches /pipes

16 Sqmm 4 core

25 sqmm 4 core

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed.

L G BUILDERS

M/s VINOD KUMAR SHARMA

M/S ANIL KUMAR

M/S Parshant Associates

AMIT ASSOCIATES

M/S Sunil Steel Works