PROVN OF MESH ENCLOSURE AND OTHER MISC B/R WORKS IN WASTE MANAGEMENT SHED INCLUDING PROVN OF CERTAIN MINOR WORKS AT INS CHILKA UNDER GE CHILKA

Amount

Excavating over areas not exceeding 1.5m depth and getting out as in soft/ loose soill complete all as specified and as directed.

Excavating in post holes (or similar holes) , each n exc 0.5 cu. m, getting out, returning, filling in & removing surplus soil to a distance not exceeding 50 m in soft/oose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation etc and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cm as in soft/loose soil complete all as specified and as directed.

Removing excavated soil to a distance exceeding 50 m but not exceeding 100 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M&L for broken stone hardcore of guage not exceeding 63mm , deposited , spread, leveled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L for natural river sand as cushioning of cables including spreading and punning down complete all as specified and as directed. Note :- Punned thickness shall be measured for payment purpose

M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundations, filling and mass-concrete complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate in cover slabs for manholes , chullah hoods, chajjas etc set in cement mortar 1: 6 including necessary use and waste of formwork complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plain exceeding 6m means radius built in cement mortar 1:6 complete all as specified and as directed.

Supply and laying fly ash brick of size 200x100x80mm locallly available as protection of cable in trenches complete all as specified and as directed.

Cutting holes not exceeding half brick in brick walls built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkat with shutters exceeding 1.5 sqm but not exceeding 4.0 sqm (without taking off shutters from the frames) complete all as specified and as directed.

S&F 140mm overall length of cover plate of floor door stopper of aluminium alloy body and tougue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F Aluminium body(Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

S&F mild steel 4 leavers Mortice lock, vertical type , size 100 mm complete all as specified and as directed.

S&F in repair 20 mm dia brass chromium plated tubular towal rail , 60 cm long complete all as specified and as directed.

S&F 4mm dia welded galvanised steel wire, 50mmX50 mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165complete all as specified and as directed.

S&F 4 mm dia Plain mild steel wire galvanised class 3 fencing/cloth line with PVC coated including straining and fixing to steel post and to straining bolts, including securing with and provision of galvanised iron tying wire or staples or steel pins etc complete all as specified and as directed.

M&L Mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

S&F for anchor fastener round close hook of size 18mmx160 mm inserted into the brick wall, RCC columns and beams by drilling and making good to the existing surfaces to match with the existing etc complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium door shutter, aluminium section weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, handels 2 Nos in each door, anodised aluminium snap beading, screws etc complete all as specified and as directed. Note :- Glass shall be measured and paid seperately under respective item as considered therein.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutters sliding /openable type without sash bar, aluminium section weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, locking arrangement and aluminium anodised fittings such as 100 mm long handle 02 Nos,150 mm long hinges,peg stays including all other accossorises etc complete all as specified and as directed. Note :- Glass shall be measured and paid seperately under respective item as considered therein.

S&F for anodised powder coated of any colour (thickness of powder coated not less than 15 micron) aluminium grill of Make "Deco grill" and DG-202 model with aperture size 60x40mm fixed with suitable channel complete all as specified and as directed.

M&L 9 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work complete all as specified and as directed.

M&L for roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3.0 kg/sqm complete all as specified and as directed.

M&L 18-20 mm thick pre-polished machine cut Kota stone slab flooring over 20 mm thick screed bed in cement mortar 1:4, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for coloured non skid ceramic tiles not less than 6 to 7 mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for coloured glazed ceramic tiles in vertical surface 350mmx250mmx 6 to 7mm / 450mmx350x6to7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor/patch/hardstanding/approach etc complete all as specified and as directed.

M&L for 100mm thick PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in floor or hard standing or in path, surface finished even and fair complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over and including average 50mm thick sand cushioning complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigment over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

M&L for 100mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in Hard standing or in path or in floor, surface finished even and fair complete all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection , surface finished even and fair complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not packing) removing of serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L 15 mm thick rendering on brick or concrete surfaces in cement mortar 1:4, surface finished even and fair complete all as specified and as directed.

M&L for applying two coats of weather proof acrylic emulsion paint exterior grade (100% acrylic) of silver steak shade of asian paint including preperation of old decorated external plastered surfaces of walls , column, pillars , RCC chajja and facia etc with approved shade complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L 5 mm thick rendering in cement mortar 1:3 on ceiling , surface finished even and fair complete all as specified and as directed.

M&L 10 mm thick rendering on brick work or concrete surfaces in cement mortar 1:6, surface finished even and fair complete all as specified and as directed.

M&L for 10 mm thick Vitrified ceramic tiles,light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor or skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed /rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty including complete removal of existing old decorated surface of wall complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty including complete removal of existing old decorated surface of ceiling complete all as specified and as directed.

M&L for applying three coat of white wash on ceiling including preparation of newly plastered surfaces of ceiling complete all as specified and as directed.

M&L for applying three coat of white wash on wall including preparation of newly plastered surfaces of wall complete all as specified and as directed.

S&F 4 mm thick sheet glass, ordinary quality in squares not exceeding 0.5 sqm each pane for fixing to aluminium or wooden joinery work complete all as specified and as directed.

S&F 5.5 mm thick sheet glass, ordinary quality in squares exceeding 0.5 sqm each pane for fixing to aluminium or wooden joinery work complete all as specified and as directed.

M&L applying one coat of white wash on wall including preperation of old decorated plastered surfaces of walls complete all as specified and as directed.

M&L applying one coat of white wash on ceiling including preparation of old decorated plastered surfaces of ceiling complete all as specified and as directed.

M&L applying two coat of synthetic enamel paint of approved shade over one coat of red oxide primer including prepration of new or untreated steel and iron surfaces of any description over 10cm in width or girth complete all as specified and as directed.

M&L applying two coat of synthetic enamel paint of approved shade including prepration of old painted steel and iron surfaces of any description over 10cm in width or girth complete all as specified and as directed.

Disconnecting existing tanks exceeding 500 litres but not exceeding 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes complete all as specified and as directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I including 40 mm bore ball brass valves high pressure polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repair 15 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 20 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 20 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 40 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

S&F 15 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow, reducers etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed. Make:- Tata/ Jindal/ Prakash Surya.

S&F 20 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow, reducers etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed. Make:- Tata/ Jindal/ Prakash Surya.

S&F 40 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow, reducers etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed. Make:- Tata/ Jindal/ Prakash Surya.

M&L for 40 mm dia bore galvanised iron light grade for cable protection and sealing both ends including taking out old pipe complete all as specified and as directed. Make:- Tata/ Jindal/ Prakash Surya.

S&F Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and as directed. Note:-Pillar tape shall be measured seperately as considered under respective item.

S&F 32mm bore waste coupling of PTMT (half or full threaded) (minimum weight 32mm-45 gms/40 mm-60gms) complete all as specified and as directed.

S&F 50 mm bore Low density polyetylene pipe(LDPE) of pressure rating 6kgf/cm2 as in waste pipe to wash hand Basin/Kitchen sink /urinal complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) soil, waste and rainwater pipes single socketed in any length with adhesive joints, laid in trenches or in floor complete all as specified and as directed.

S&F 75 mm diameter of outlet PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed.

Supply only 15 mm bore dia CP pillar tap of cast copper alloy, fancy type screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 15 mm bore dia stop valves , chromium plated with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs 15 mm dia Bib taps, Fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs PVC soap tray fixed with screw to the wall complete all as specified and as directed. Make :- Prayag Cat part No 195 or equivalent as approved.

S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolt,flushing cistern and flushing pipe) including necessary connection complete all as specified and as directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repair 10 litres capacity PVC valveless, flushing cistern, low level with inlet, ball valve, float and handle including brackets and 32 mm dia flush pipe of polyethylene complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts and washers of length 600mm long complete all as specified and as directed.

S&F in repair vitreous china urinal, bowl type, flat back of size 465mm X 355mm X 265mm white with grating,union and waste coupling including fixing plugs, bedding urinal against wall in cement mortar 1:2 ,securing urinals to plugs including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F Grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gms) complete all as specified and as directed.

S&F in repairs plastic water closet seat, white,closed pattern with flat bottom and cover with mild steel chromium plated hinging device complete all as specified and directed.

S&F in repair Shower rose Brass chromium plated of size 125 mm with swivel joint, fixed to 15mm dia GI pipe including galvanised iron elbow and nipple complete all as specified and as directed. Make:-Parryware or equivalent as approved.

S&F chromium plated , fancy type health faucet with hose & hook for EWC including necessary fitting complete all as specified. Make :- Prayag Cat No 452 or equivalent as approved.

Demolition of Brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and as directed.

Demolition of cement concrete (unreinforced) not exceeding 15cm thick (below or above ground level) and removing the debries to a distance not exceeding 50m complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring(light,fan,socket or power) complete along with fittings such as switches, sockets, ceiling rose , lamp holder, tube light fittings and making good distrubed surfaces of walls or ceiling etc to match with the existing complete all as specified and as directed.

M&L for point wiring with 1.5 sqmm PVC FRLS insulated unsheathed multistranded copper cable with 1.5 sqmm PVC FRLS insulated multistranded copper cable as earth continuity drawn in including concealed PVC Conduit not less than 20mm dia including pressed mild steel concealed box made out of 1.6 mm thick sheet and accessories required for mounting switches/sockets, accessories such as spacers, saddles, junction boxes for one light / fan point / bell point/5 amp socket controlled by one switch complete all as specified and as directed.

All as per item No.91 above but with 2.5 sqmm PVC insulated unsheathed multistranded copper FRLS grade cable with one run of 2.5 sqmm PVC FRLS insulated copper cable as earth continuity for power point on independent board complete all as specified and as directed.

Taking down carefully sub main wiring including batten/ conduit by unscrewing from wall,ceiling and making good surfaces to match with existing complete all as specified and as directed.

M&L sub main wiring with 2 runs of 4 sqmm PVC FRLS insulated unsheathed copper cable multistandard 1100 V drawn in and including surface PVC conduit not less than 25 mm dia and one run of PVC FRLS insulated unsheathed 4 Sqmm copper cable as earth continuity conductor with accessories complete all as specifed and as directed. Note :- 2 runs of 4 Sqmm, 1 run of 4.0 Sqmm copper earth wire and 1 run of PVC conduit shall be measured as one unit length.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, complete all as specified and as directed.

S&F switch socket combination 2 pin & 3 pin 5 Amp, 230 volt, multipurpose, complete all as specified and as directed.

S&F switch socket combination 5 in 1 type, 3 pin 5 / 15 Amp, 230 volt, multipurpose, complete all as specified and as directed.

S&F ceiling rose, surface Bakelite 65 x 30mm, three terminals, complete all as specified and as directed.

S&F five stepped socket type electronic fan regulator for ceiling fan of any sweep including necessary connection complete all as specified and as directed.

Supply, laying, jointing and testing XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 25sqmm 4 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.

Supply, laying, jointing and testing XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 6 sqmm 2 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.

M&L sub main wiring with 4 run of 16 sqmm PVC FRLS insulated copper conductor, single core cable and 2 run of 10 sqmm PVC FRLS insulated copper conductor, single core cable in including surface PVC conduit of dia not less than 25 mm complete all as specified and as directed.

S&F Factory made sheet metal enclosure for DBs double door (fixed flush to the wall), TPN, 415 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F in replacement MCB 63 Amp, 415 Volt, TPN, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F in replacement MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F 'D' type Industrial socket with sheet metal distibution box along with plug of current rating 63Amps, 415 V, 50 Hz, AC supply complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth strip32mmx6mm (upto 7.5 M in length from earth plate) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-2009, connected to earthing with DBs all as specified including excavation and earth work in any type of soil, PCC 1:3:6 type C-1 using 20mm graded stone aggregate in chamber & 40mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab, reinforced, with 8mm dia TMT bar at 150mm c/c both ways, 50 mm dia GI pipe light grade for earth lead protection, 20mm dia GI medium grade pipe for watering , water funnel etc complete all as specified and testing on completion.

S&F 25 watt LED Garden light CORAL (Opal) , IP65 New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source including 40 mm dia galvanised iron pipe of 1.5 M length including fixing arrangement and grouting in cement concrete 1:3:6 Type C-2 using 40 mm graded aggregate as per direction of Engineer-in-Charge complete all as speficifed and directed . Make :Havells model No. CORALPT25WLED757PSYMTOPC or equivalent Model in Phillips/Crompton Greaves/Bajaj as approved.

PABITRA MOHAN PARIDA

PRADIPTA KUMAR PANI

SUBAL CHARAN PRADHAN