Class Room Table with Attached Chair Supply

Class Room Table (Dual Desk) with Attached Chair

The product should be in complete knock down structure as much as possible/feasible enabling ease in transportation and assemblies within classrooms. The panels are made from 18 ±0.5mm thk Pre-Laminated MDF (IS 14587) with 1 mm PVC edge banding on all sides. Top Dimension shall be 1048 X 378 mm. Top Height shall be 750mm. Seat Dimension shall be 1048 X 335mm, Seat Height shall be 437 mm. Back dimensions shall be 1048 X 265mm. Size may vary +/- 5mm. The Under structure is Made of ERW tubes [IS 7138] 25.4 ±0.3mm x 25.4 +0.3mm x1.2 +/- 0.096mm thk powder coated 50microns (+10) at base which are welded to the desk and seat supports that are made of MS 'C' sections 29+/-0.3mm X 24.9+/-0.3mm X 1.2+/-0.096mm thick powder coated 50microns (+10). Stiffeners that are provided between the 2 vertical frames at base and back of seat are made from ERW tubes [IS 7138] 25.4 ±0.3mm x 25.4 ±0.3mm x1.2 ±0.096mm thk powder coated 50microns (+10). The tubes are closed with plastic caps. Additional horizontal supports of ERW tubes [IS 7138] 25.4 ±0.3mm x 25.4 ±0.3mm x1.2 ±0.096mm thk powder coated 50microns (+10) are placed Between front legs and between back legs to add the rigidity of the structure. The storage shelves are made from 0.6 ±0.09mm thk powder coated 50 microns (+10) MS sheet which is affixed below the desk top. Hooks äre provided on either side of the vertical frame of the desk, for hanging bags/bottles. They are made from 6.0 mm dia MS rods powder coated 50microns (+10). The under structure is assembled using M5 Trilobular Taptite screws / MIG welded. Nylon studs are provided on bottom side of RH/LH Frame, All Fabricated parts which require welding are MIG / Spot welded. The Screw joining Wooden Panels to under structure are Chip Board Screws. All steel structural components shall be made from virgin material and tested conforming to IS: 513/ IS: 10748/ IS: 2062/ IS: 7138. Recycled steel will not be accepted. Top understructure - 960mm (W) X 310mm(D). Back Panel Support - 960mm(W) X 325mm(H). Seat support - 960mm(W) X 280mm(D). Colour: Silver, Grey Pre-Laminated MDF, Black ERW tubes & MS sheet