Supply Of India Mark II Deepwell Handpump set with G.I. Pipes, 150 mm MS casing Pipe and H.P. Spare Parts

India Mark II deepwell handpump

I.S.I. Marked deepwell IM-II Hand Pump Sets Confirming To I.S. 15500(Part 2)/2004 ( 12 Nos. G.I. Pipe & 12 Nos.C.Rod)

32 M.M. G.I. Pipe I.S. 1239 With 3 Mtr. Long dip Galvanized screwed at both & Socket at one end as per BIS Specification.

HEAD ASSEMBLY COMPLATE ( With handle) (IS:9301/1990)

HEAD (With front cover and third plate) (IS:9301/1990)

HEX BOLT M 12 X 20

Hex Bolt M 12 X 40 with Nuts 2 Nos (IS:1363/1984)

HEX NUT M 12

HANDLE Spacer (M.S.)

HANDLE / HANDLE BAR Only

HANDLE AXLE / AXLE PIN (IS: 9301/1990)

CHAIN WITH COUPLING (IS: 9301/1990) For IM-II

HEX NYLOCK/ PREVILING TORQUE Steel Hex Lock Nut M 10x1.5

High Tansile Bolt M 10 X1.5 X 40/For Chain (IS: 1365)

SINGLE SHILDED BALL BEARING 6204-Z (SKF)

WATER TANK / CHAMBER IM - II (IS:9301/1990)

CONNECTING ROD (IS:9301/1990) M12X3 MTR Long

CONNECTING ROD COUPLING / CONNECTOR M12x50MM

CYLENDER ASSEMBLY (Complete of Stainless Steel Plunger Rod 12 Mm Dia With N.R. Pump Bucket) Suitable For Deep Weel Hand Pump.

CYLENDER BODY WITH BRASS LINER For IM-II

REDUCER CAP ( C I )

BRASS LINER FOR IM- II

PLUNGER ROD (S.S.)

SEALING RING N.R.

PLUNGER YOKE BODY ( Gun Matal )

Upper Vaive Assembly Complete (With 2 N.R. Pump Bucket and Comprising Plunger Yoke Body. Upper valve Rubber Sealing Spacer And Follower ) Suitabl for Deep Well Hand Pumps.

UPPER VALVE GUIDE WITH RUBBER SEAT

RUBBER SEAT FOR UPPER VALVE

CHECK VALVE ASSEMBLY CVG+RS+RSR

PUMP BUCKET N.R. For IM-II

SPACER ( Gun Metal)

FOLLOWER (IS:13287/1992) ( Gun Metal)

RUBBER SEAT RETAINER ( Gun Metal)

RUBBER SEAT FOR LOWER VALVE

CHECK VALVE GUIDE ( Gun Metal)

CHECK VALVE SEAT ( Gun Metal)

TELISCOPIC PEDESTAL ASSEMBLY

Lower Valve Assemble Complete with Check Valve Seat. Check Valve Guide And O'' Ring Suitable For Deep Well Hand Pumps.

Washer (4 mm Thick Suitable For Deep Well Hand Pumps)

Pipe Wrench 600 mm (Taparia Make)

Pipe Wrench 450 mm (Taparia Make)

Pipe Wrench 300 mm (Taparia Make)

Bottom Die With Holder M. 12x1.75 P.For 12 mm threads Set (Tapariamake)

M.6 Ring Spanner M. 17x19

Double Ended Spanner M.17 x 19 (10 mm x12mm)

Scerew Driver 250 mm (Taparia Make)

Adjustable Spanner 250 mm (Taparia Make)

Hacksaw Frame 300mm (With Hacksaw Blades No.)Highspeed Steel

Bootom Die Bit M. 12 x 1.75 Only (Taparia Make)

1.1/4'' Screw Jack On Heavy Duty Clamp (32 mm Dia ) Plale Type.

150 mm Nominal Bore Dia. 4.80 mm Thick M.S. Casing Pipe Medium class as per IS: 1239 (part-1) screwed at both ends ,erw sockets as per IS : 1239(part 2) at one end & threaded protector at other end.

Special water Chamber(Hot dipped Galvanised

SS Nipple 32 mmm

150 mm Nominal Bore Dia. 4.80 mm Thick M.S. Casing Pipe Medium class as per IS: 1239 (part-1) plain at both ends ,

150 mm Nominal Bore Dia. 4.80 mm Thick M.S. Casing Perforated Pipe Medium class as per IS: 1239 (part-1) plain at both ends ,

SRI VINAYAKA INDUSTRIES

Vishal Pipes Limited

QUALITY PUMPS PVT LTD

DEEPWELL PUMPS AND ENGINEERING CO. PVT. LTD.