NIT NO. 239/DURG(Bemetara)/2026

GENERAL ABSTRACT

S.NO. PARTICULAR AMOUNT

Say (Rs. In Lacs) :-

Sub Engineer Sub Divisional Officer Executive Engineer

PWD Sub Division., Bemetara PWD Division., Bemetara

Detail Estimate for Strengthening of Bhimbhauri - Kumhi Road Length 4.40 Km under A/R 2016-17

S. No. Item No. Particular Qty. Unit Rate Amount

1 It - 2.2 P - 8 Clearing Grass and Removal of Rubbish (clearing grass and removal of rubbish up to a distance of 50 meters outsite the periphery of the area) Hect 13438

2 It - 3.16 P - 12 Surface Drains in Soil (Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment within a lead of 50 meters (average lead 25 meters) Meter 44

3 It - 3.12 P - 12 Construction of embankment with Material Obtained from Borrow Pits/Borrow Area (Construction of embankment with approved material/selected soil having C.B.R.>5 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2) Cum. 223

4 It - 4.10 P - 16 Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406.) Cum. 1434

5 It - 5.1 P - 19 Prime coat (Providing and applying primer coat with oil based bitumen emulsion (SS-1, grade confirming to IS:8887) on prepared surface of granular Base including clearing of road surface and spraying primer using mechanical means as per clause 502.

(i) on WBM/WMM surface @0.85 Kg/sqm. Cum. 64

6 It - 5.2 P - 19 Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confirming to IS:8887) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503.

(i) Bituminous surface @ 0.25 kg /Sqm Sqm. 15

(ii) Granular surfaces treated with primes @ 0.30 kg /Sqm Sqm. 17

7 It - 5.7 P - 20 Open-Graded Premix Surfacing (Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades as per clause 510)

(i) Mechanical method using Bitumen and minimum 40-60 TPH capacity hot mix plant. With mechanical paver finisher. Sqm 122

8 It - 5.9 P -21 Seal Coat (Providing and laying seal coat for sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall including rolling and finishing using Type A and B seal coats as per clause 511)

(i) Providing and laying of premix sand seal coat with minimum 40-60 TPH HMP of appropriate capacity using crushed stone chipping (passing through 2.36mm size sieve) and with bitumen as binder. Sqm 47

9 It - 4.13 P - 17 Construction of Shoulders (Construction of shoulders as per clause 408 with selected soil from borrow pits / borrow areas having CBR not less than 12 and shall have L.L. and P.I. not more than 25% and 6% respectively, inclusive of all leads and lifts, including clearing and scrapping of existing surface, providing required cross fall, compacting. watering rolling and royalty charges etc. complete.

(B) With smooth wheeled roller Cum 277

10 It - 5.19 P - 23 & 24 Providing and laying leveling course / profile corrective course with bituminous macadam With minimum 40-60 TPH capacity hot mix plant using crushed aggregates of Grading-1 premixed with bituminous binder @ 3.1% transported to site and laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clause-501.6 and 501.7 to achieve the desired compaction complete in all respect and as per relevant clause section 500.

(B) With mechanical paver finisher Cum. 5432

11 9.1 P - 27 Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.) Ordinary soil Up to 3 m depth Cum. 146

12 It - 9.5 P - 40 Providing and laying Reinforced Cement Concrete pipe NP 3 /prestressed concrete pipe. (Laying Reinforced cement concrete pipe NP3 /prestressed concrete pipe for culverts including fixing collar with cement mortar 1:2 but excluding bedding below pipes, excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . )

(B) 600 mm dia Meter 2459

13 It - 9.6 P - 40 Providing 1st class bedding below pipes with graded sand or other granular materials passing through 5.6 mm sieve as per clause 2904. Cum 759

Sub Engineer Sub Divisional Officer Executive Engineer

PWD Sub Division Bemetara PWD Division, Bemetara

Detail Estimate for Strengthening of Bhimbhauri - Kumhi Road Length 4.40 Km under A/R 2016-17

S. No. Item No. Particular Measurement Qty.

Page Nos. L W H/D

1 It - 2.2 P - 8 Clearing Grass and Removal of Rubbish (clearing grass and removal of rubbish up to a distance of 50 meters outsite the periphery of the area)

2 It - 3.16 P - 12 Surface Drains in Soil (Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment within a lead of 50 meters (average lead 25 meters)

3 It - 3.12 P - 12 Construction of embankment with Material Obtained from Borrow Pits/Borrow Area (Construction of embankment with approved material/selected soil having C.B.R.>5 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2)

Hard Shoulder +

4 It - 4.10 P - 16 Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406.)

Add 22% for Patch work 0.22 3.5 3 0.15

5 It - 5.1 P - 19 Prime coat (Providing and applying primer coat with oil based bitumen emulsion (SS-1, grade confirming to IS:8887) on prepared surface of granular Base including clearing of road surface and spraying primer using mechanical means as per clause 502.

(i) on WBM/WMM surface @0.85 Kg/sqm.

6 It - 5.2 P - 19 Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confirming to IS:8887) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503.

(i) Bituminous surface @ 0.25 kg /Sqm

(ii) Granular surfaces treated with primes @ 0.30 kg /Sqm

7 It - 5.7 P - 20 Open-Graded Premix Surfacing (Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades as per clause 510)

(i) Mechanical method using Bitumen and minimum 40-60 TPH capacity hot mix plant. With mechanical paver finisher.

8 It - 5.9 P -21 Seal Coat (Providing and laying seal coat for sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall including rolling and finishing using Type A and B seal coats as per clause 511)

(i) Providing and laying of premix sand seal coat with minimum 40-60 TPH HMP of appropriate capacity using crushed stone chipping (passing through 2.36mm size sieve) and with bitumen as binder.

9 It - 4.13 P - 17 Construction of Shoulders (Construction of shoulders as per clause 408 with selected soil from borrow pits / borrow areas having CBR not less than 12 and shall have L.L. and P.I. not more than 25% and 6% respectively, inclusive of all leads and lifts, including clearing and scrapping of existing surface, providing required cross fall, compacting. watering rolling and royalty charges etc. complete.

(B) With smooth wheeled roller

10 It - 5.19 P - 23 & 24 Providing and laying leveling course / profile corrective course with bituminous macadam With minimum 40-60 TPH capacity hot mix plant using crushed aggregates of Grading-1 premixed with bituminous binder @ 3.1% transported to site and laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clause-501.6 and 501.7 to achieve the desired compaction complete in all respect and as per relevant clause section 500.

(B) With mechanical paver finisher

11 9.1 P - 27 Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.) Ordinary soil Up to 3 m depth

12 It - 9.5 P - 40 Providing and laying Reinforced Cement Concrete pipe NP 3 /prestressed concrete pipe. (Laying Reinforced cement concrete pipe NP3 /prestressed concrete pipe for culverts including fixing collar with cement mortar 1:2 but excluding bedding below pipes, excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . )

13 It - 9.6 P - 40 Providing 1st class bedding below pipes with graded sand or other granular materials passing through 5.6 mm sieve as per clause 2904.

Sub Engineer Sub Divisional Officer PWD Sub Division Bemetara

NIT Schedule For Special Repair Estimate for Various Roads Under Sub Division Bemetara Durg Dhamdha Bemetara Road, Jeora Arjuni Boriya Nayapara Road, Bhaisa Bhansuli Road,Pahanda Bargaon Khudmuda Road Kobiya Berla Road, Tuma Kestara road, Mau Mutpuri road, Pendri Kusmi road, Mohrenga App.road, Ghatoli Bhothedih road, Pousi Tulsi Shivnath Nadi App.road, Khairjhiti Kusmi Kudmuda road, Karhi Raweli road, Tala Dokla road, Jeora Dokla, Old NH-30 to Shivnath App.road.

SERIAL No. Department SOR Year Item Code Description UOM Rate Quantity Amount Ref Serial No CREDIT ITEM (0/1) Calc Field(Y/N) Offset Price

1 PWD PWD Road 2025 It - 3.11 P - 12 Scarifying existing bituminous surface to a depth of 50 mm (Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead up to 1000 meters) as per clause 305.4.3. Sqm.

2 PWD PWD Road 2025 It - 4.10 P - 16 Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406.) Cum.

3 PWD PWD Road 2025 It - 5.1 P - 19 Prime coat (Providing and applying primer coat with oil based bitumen emulsion (SS-1, grade confirming to IS:8887) on prepared surface of granular Base including clearing of road surface and spraying primer using mechanical means as per clause 502.on WBM/WMM surface @0.85 Kg/sqm. Sqm.

4 PWD PWD Road 2025 It - 5.2 P - 19 Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confirming to IS:8887) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503. (i) Bituminous surface @ 0.25 kg /Sqm Sqm.

5 PWD PWD Road 2025 It - 5.2 P - 19 (ii) Granular surfaces treated with primes @ 0.30 kg /Sqm Sqm

6 PWD PWD Road 2025 It -5.19 P - 23 & 24 Providing and laying leveling course / profile corrective course with bituminous macadam With minimum 40-60 TPH capacity hot mix plant using crushed aggregates of Grading-1 premixed with bituminous binder @ 3.1% transported to site and laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clause-501.6 and 501.7 to achieve the desired compaction complete in all respect and as per relevant clause section 500. With mechanical paver finisher Cum.

7 PWD PWD Road 2025 It - 5.8 P - 21 Close Graded Premix Surfacing/Mixed Seal Surfacing (Mechanical means using minimum 40-60 TPH capacity of HMP. Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness using bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade, complete as per clause 508) With mechanical paver finisher With bitumen ii) Type B ( 13.2 mm to 0.09 mm size aggregates ) Sqm

8 PWD PWD Road 2025 3.13 Construction of sub-grade with Material Obtained from Borrow Pits/Borrow Area Construction of sub-grade with approved material/selected soil having C.B.R. > 8 (unless specified otherwise in the contract) obtained from borrow pits/borrow area with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 Sqm

9 PWD PWD Road 2025 6.6 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.(For Village roads) P.C.C. M-10 Cum.

10 PWD PWD Road 2025 6.7 Providing and laying Un-reinforced Cement Concrete without Dowel bars including formwork and expansion, contraction & longitudinal joints as per design and as per IRC-62-2014, over prepared base a per approved mix design and finishing to lines and grade as per Drawing for Pavement thickness less than 200mm in Low Volume Roads. PCC Grade M30 with minimum Cement Content @ 375kg/cum Cum.

Remark - All Road SOR Date 01.01.2025 Item should be taken during work as per Requirement

Sub Engineer Sub Divisional Officer PWD, Sub-Division Bemetara Executive Engineer PWD, Division-Bemetara

NIT Schedule For Special Repair Estimate for Various Roads Under Sub Division Bemetara Durg Dhamdha Bemetara Road, Jeora Arjuni Boriya Nayapara Road, Bhaisa Bhansuli Road,Pahanda Bargaon Khudmuda Road Kobiya Berla Road, Tuma Kestara road, Mau Mutpuri road, Pendri Kusmi road, Mohrenga App.road, Ghatoli Bhothedih road, Pousi Tulsi Shivnath Nadi App.road, Khairjhiti Kusmi Kudmuda road, Karhi Raweli road, Tala Dokla road, Jeora Dokla, Old NH-30 to Shivnath App.road.

SERIAL No. Department SOR Year Item Code Description UOM Rate Quantity Amount Ref Serial No CREDIT ITEM (0/1) Calc Field(Y/N) Offset Price

1 PWD PWD Road 2025 It - 3.11 Scarifying existing bituminous surface to a depth of 50 mm Sqm. 23.00 (Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead up to 1000 meters) as per clause 305.4.3. Sqm. 21

2 PWD PWD Road 2025 It - 4.6 P Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406. Cum. 1606

3 PWD PWD Road 2025 It - 5.1 P - 19 Prime coat (Providing and applying primer coat with oil based bitumen emulsion (SS-1, grade confirming to IS:8887) on prepared surface of granular Base including clearing of road surface and spraying primer using mechanical means as per clause 502. (i) on WBM/WMM surface @0.85 Kg/sqm Sqm. 77

4 PWD PWD Road 2025 It - 5.2 P - 19 Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confirming to IS:8887) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503. i) Bituminous surface @ 0.25 kg /Sqm Sqm. 15

5 PWD PWD Road 2025 ii) Granular surfaces treated with primes @ 0.30 kg /Sqm Sqm 18

6 PWD PWD Road 2025 It - 5.21 Providing and laying leveling course / profile corrective course with bituminous macadam With minimum 40-60 TPH capacity hot mix plant using crushed aggregates of Grading-1 premixed with bituminous binder @ 3.1% transported to site and laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clause-501.6 and 501.7 to achieve the desired compaction complete in all respect and as per relevant clause section 500. B) With mechanical paver finisher Cum. 5367

7 PWD PWD Road 2025 It - 5.11 Open - Graded Premix Surfacing Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades as per clause 510. IMechanical method using Penetration grade Bitumen and 40-60 HMP of appropriate capacity not less than 35 tonnes/hour. Sqm 120

8 PWD PWD Road 2025 3.13 Construction of sub-grade with Material Obtained from Borrow Pits/Borrow Area Construction of sub-grade with approved material/selected soil having C.B.R. > 8 (unless specified otherwise in the contract) obtained from borrow pits/borrow area with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 Cum. 268

9 PWD PWD Road 2025 6.3 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications^ For Village roads ) P.C.C. M-10 Cum. 3449

10 PWD PWD Road 2025 6.4 Providing and laying Un-reinforced Cement Concrete without Dowel bars including formwork and expansion, contraction & longitudinal joints as per design and as per IRC-62, over a prepared base a per approved mix design and finising to lines and grade as per Drawing for Pavement thickness less than 200mm in Low Volume Roads. With Cement concrete grade M-30 and minimum cement content @ 375 kg/cum Cum. 4748

Remark - All Road SOR Date 01.01.2015 up to date & amendment Item should be taken during work as per Requirement

Sub Engineer Sub Divisional Officer PWD, Sub-Division Bemetara Executive Engineer PWD, Division-Bemetara

PUBLIC WORKS DEPARTMENT

For Technical Sanction

Special Repair Estimate for Various Roads Under Sub Division Bemetara Durg Dhamdha Bemetara Road, Jeora Arjuni Boriya Nayapara Road, Bhaisa Bhansuli Road,Pahanda Bargaon Khudmuda Road Kobiya Berla Road, Tuma Kestara road, Mau Mutpuri road, Pendri Kusmi road, Mohrenga App.road, Ghatoli Bhothedih road, Pousi Tulsi Shivnath Nadi App.road, Khairjhiti Kusmi Kudmuda road, Karhi Raweli road, Tala Dokla road, Jeora Dokla, Old NH-30 to Shivnath App.road.

Assembly- Bemetara

Block - Bemetara

Estimated Cost Rs. Lacs

P.W.D. DIVISION BEMETARA

REPORT & SPECIFICATION

1 Name of Work :- Special Repair Estimate for Various Roads Under Sub Division Bemetara Durg Dhamdha Bemetara Road, Jeora Arjuni Boriya Nayapara Road, Bhaisa Bhansuli Road,Pahanda Bargaon Khudmuda Road Kobiya Berla Road, Tuma Kestara road, Mau Mutpuri road, Pendri Kusmi road, Mohrenga App.road, Ghatoli Bhothedih road, Pousi Tulsi Shivnath Nadi App.road, Khairjhiti Kusmi Kudmuda road, Karhi Raweli road, Tala Dokla road, Jeora Dokla, Old NH-30 to Shivnath App.road.

2 Amount of Estimate :- Rs. Lacs.

3 Authority :- Higher Authority

4 Necessity :- The proposed Roads of under Sub Division Bemetara is Class-I B.T. Roads.The road is Partly damaged due to contineous traffic and B.C. soil area. Hence to obtain above said work the estimate has been framed and submitted.

5 Provisions :- Following provisions have been made in the estimate -

1. WMM - 150 mm thick as base course

2. P.C.C. for Levelling course

3. B.T. - 20 mm thick with M.S.S.

6 Specifications :- As per standard of MORT & H details and specifications.

7 Rates :- As per Road SOR issued by Engineer-in-Chief PWD Raipur (C.G.) wef 01/01/2025 & amendments upto date .

Sub Engineer Sub Divisional Officer PWD Sub Div Bemetara Executive Engineer PWD Division., Bemetara

GENERAL ABSTRACT

Estimate No. : - Amount to Rs :- Lacs

Department : - Executive Engineer, PWD (B&R) Division Bemetara

Project of which the work forms part work: - Special Repair Estimate for Various Roads Under Sub Division Bemetara Durg Dhamdha Bemetara Road, Jeora Arjuni Boriya Nayapara Road, Bhaisa Bhansuli Road,Pahanda Bargaon Khudmuda Road Kobiya Berla Road, Tuma Kestara road, Mau Mutpuri road, Pendri Kusmi road, Mohrenga App.road, Ghatoli Bhothedih road, Pousi Tulsi Shivnath Nadi App.road, Khairjhiti Kusmi Kudmuda road, Karhi Raweli road, Tala Dokla road, Jeora Dokla, Old NH-30 to Shivnath App.road.

Register No. : - of 2026-27

Qty Sub Head Rate Per Amount Total

Special Repair Estimate for Various Roads Under Sub Division Bemetara Durg Dhamdha Bemetara Road, Jeora Arjuni Boriya Nayapara Road, Bhaisa Bhansuli Road,Pahanda Bargaon Khudmuda Road Kobiya Berla Road, Tuma Kestara road, Mau Mutpuri road, Pendri Kusmi road, Mohrenga App.road, Ghatoli Bhothedih road, Pousi Tulsi Shivnath Nadi App.road, Khairjhiti Kusmi Kudmuda road, Karhi Raweli road, Tala Dokla road, Jeora Dokla, Old NH-30 to Shivnath App.road. As Per Attached

Say Rs : - Lacs

Sub Engineer Sub Divisional Officer Executive Engineer

PWD (B&R) PWD (B&R)

Sub Division Bemetara Division Bemetara

Special Repair Estimate for Various Roads Under Sub Division Bemetara Durg Dhamdha Bemetara Road, Jeora Arjuni Boriya Nayapara Road, Bhaisa Bhansuli Road,Pahanda Bargaon Khudmuda Road Kobiya Berla Road, Tuma Kestara road, Mau Mutpuri road, Pendri Kusmi road, Mohrenga App.road, Ghatoli Bhothedih road, Pousi Tulsi Shivnath Nadi App.road, Khairjhiti Kusmi Kudmuda road, Karhi Raweli road, Tala Dokla road, Jeora Dokla, Old NH-30 to Shivnath App.road.

S. No. Item No. Particular Measurement Qty. Unit Rate Amount

Page Nos. L W H/D

1 It - 3.11 Scarifying existing bituminous surface to a depth of 50 mm Sqm. 23.00 (Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead up to 1000 meters) as per clause 305.4.3. Area

Jeora Arjuni Boriya Nayapara Road 1 800 3 0.05

Bhaisa Bhansuli Road 1 500 3 0.05

Pahanda Bargaon Khudmuda Road 1 500 3.75 0.05

2 It - 4.6 P Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406.

Bhaisa Bhansuli Road 300 0.15

Pahanda Bargaon Khudmuda Road 200 0.15

3 It - 5.1 P - 19 Prime coat (Providing and applying primer coat with oil based bitumen emulsion (SS-1, grade confirming to IS:8887) on prepared surface of granular Base including clearing of road surface and spraying primer using mechanical means as per clause 502. (i) on WBM/WMM surface @0.85 Kg/sqm

Bhaisa Bhansuli Road 500

Pahanda Bargaon Khudmuda Road 500

4 It - 5.2 P - 19 Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confirming to IS:8887) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503. i) Bituminous surface @ 0.25 kg /Sqm

Durg Dhamdha Bemetara Road 1000 7 0.0%

Jeora Arjuni Boriya Nayapara Road 800 3

Bhaisa Bhansuli Road 1 800 3

Pahanda Bargaon Khudmuda Road 500 3.75

Kobiya Berla Road 1 500 5.5

5 ii) Granular surfaces treated with primes @ 0.30 kg /Sqm

For WMM Patch Qty as per Prime Coat Sqm. 18

6 It - 5.21 Providing and laying leveling course / profile corrective course with bituminous macadam With minimum 40-60 TPH capacity hot mix plant using crushed aggregates of Grading-1 premixed with bituminous binder @ 3.1% transported to site and laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clause-501.6 and 501.7 to achieve the desired compaction complete in all respect and as per relevant clause section 500. B) With mechanical paver finisher

Durg Dhamdha Bemetara Road 1000 7 0.05

Jeora Arjuni Boriya Nayapara Road 800 3 0.05

Bhaisa Bhansuli Road 800 3 0.05

Pahanda Bargaon Khudmuda Road 500 3.75 0.05

Kobiya Berla Road 1 500 5.5 0.05

7 It - 5.11 Open - Graded Premix Surfacing Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades as per clause 510. IMechanical method using Penetration grade Bitumen and 40-60 HMP of appropriate capacity not less than 35 tonnes/hour.

Bhaisa Bhansuli Road 1 2000 3

8 3.13 Construction of sub-grade with Material Obtained from Borrow Pits/Borrow Area Construction of sub-grade with approved material/selected soil having C.B.R. > 8 (unless specified otherwise in the contract) obtained from borrow pits/borrow area with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2

For Side Shoulder

Durg Dhamdha Bemetara Road 1 1200 7 0.1

Jeora Arjuni Boriya Nayapara Road 1 1000 3 0.1

Bhaisa Bhansuli Road 1 800 3 0.1

Pahanda Bargaon Khudmuda Road 1 500 3.75 0.1

Kobiya Berla Road 1 500 5.5 0.1

9 6.3 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications^ For Village roads ) P.C.C. M-10

For Side Shoulder

Durg Dhamdha Bemetara Road 1 379 7 0.1

Jeora Arjuni Boriya Nayapara Road 1 308.3 3 0.1

Bhaisa Bhansuli Road 1 210 3 0.1

Pahanda Bargaon Khudmuda Road 1 150 3.75 0.1

Kobiya Berla Road 1 335 5.5 0.1

10 6.4 Providing and laying Un-reinforced Cement Concrete without Dowel bars including formwork and expansion, contraction & longitudinal joints as per design and as per IRC-62, over a prepared base a per approved mix design and finising to lines and grade as per Drawing for Pavement thickness less than 200mm in Low Volume Roads. With Cement concrete grade M-30 and minimum cement content @ 375 kg/cum

For Side Shoulder

Durg Dhamdha Bemetara Road 1 7 0.1

Jeora Arjuni Boriya Nayapara Road 1 3 0.1

Bhaisa Bhansuli Road 1 3 0.1

Pahanda Bargaon Khudmuda Road 1 3.75 0.1

Kobiya Berla Road 1 5.5 0.1

Remark - All Road SOR Date 01.01.2015 up to date & amendment Item should be taken during work as per Requirement

Sub Engineer Sub Divisional Officer PWD Sub Division Bemetara Executive Engineer PWD Division, Bemetara