SPL REPAIRS TO TOSD OFFICE BLDG AT CAD PULGAON

Amount

Dismantling of Ceiling boards insulation, including cover fillets any thickness complete all as specified and directed.

M&L 8mm thick designer ceiling board (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 22x22mm of white colour all as per instruction complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer in charge.

M&L Vitrified Ceramic light shade tiles 10 mm thick (square/rectangular) polished, area of each tile n. exc, 0.36 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified.

All as item No (04) here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:4 complete all as specified.

M&L ceramic coloured matt/glossy finish tiles 7 to 8 mm thick ( square/rectangular) area of each tile exc. 0.06 sqm but n. exc, 0.11 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed by E-in-C.

M&L glazed coloured ceramic tiles 450 x 300m x 7mm thick on vertical surfaces of walls as dado etc set and joined in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in cm 1:4 complete all as specified and as directed .

M&L for Chequred cement concrete coloured tiles with glozy finish painted surface size 300 mm x 300 m x 22-25 mm thick laid over and including 20 mm thick cement mortar screed in CM 1:6 as in floors complete all as specified and directed.

Taking down cement plaster on brick or stone wall including racking out joint hacking for key scrubbing down with water complete all as specified and as directed.

M and L for rendering 10mm thick in CM 1:6 on brick masonry surface on internal wall finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work/stone or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement for mixed with integral water proofing compound at the rate of 3% by weight of cement all as per manufactures instructions incl necessary scaffolding etc for any height complete all as specified and directed. Note : Water proofing compound will be measured and paid separately

Supply only Integral water proofing compound for mixing in padding concrete.

M&L for preparation of old / New surfaces and applying Two coat of weather shield coat in camouflaging pattern over a coat of primer on external surfaces of walls Acrylic based paint (APEX) all as specified and directed by Engr-in-Charge.

M & L for applying one coat of oil bound distemper including prepration of old decorated surfaces of wall by Washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed.

M & L for preparing newly plastered wall surfaces and applying two coats of oil bound distemper incl one coat of wall care putty complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thick (below or above ground level) complete all as specified and directed

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggragate as in coping/bed blocks, bed plates etc including weathering slightly rounded or chamfered angles and throating making groves for fixing of man hole cover including necessary form work

M&L for hard core of broken stone or boulders of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, ridge, valley gutter and eves board fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified

M&L for rolled mild steel section as in main and cross beam, hip and jack rafter, purlins, brackets, extentions for rafters fixed on wooden members for fixing galvalume sheet where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, Fe-290 (Gde E-165) including drilling, cutting,bolting, welding etc. complete all as specified and directed. Note applicable for each item: 1. For cutting, drilling, welding etc machine will be supplied by mobile generator on own arrangement by contractor 2. Wastage of time for TFF issue from ISO/Fire station (as usage of generator involved) may be considered while quoting

M&L for painting with two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces and exc 10 cm width or girth including preparation of new steel surfaces all as specified and directed by EIC

M&L Preparation of old painted surfaces of steel and iron work over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified.

Preparing surfaces of wood and wood based materials,new or old, of any description and girth, not otherwise described and treated with one coat of Creosote oil as per direction.

M&L for preparing of new untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer all as specified.

Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters) of any description n exc 1.50 Sqm each all as specified and directed.

Hacking out old broken glass of any thickness/size & any description from wooden or steel frame fixed with clips/putty/wooden beading and S&F with 3.50mm thick ordinary sheet glass fixed with clips and oil putty/wooden beading completed in squares not exc 0.50 Sqm each pane all as specified and as directed.

Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B1 complete, depth of embedded portion of hold fasts not exc half brick all as specified & directed.

S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred,put to gether with glue pinned at joints complete all as specified.

S&F 2nd class hard wood 30mm thick made glazed and skelton window shutter open rebated and prepared to receive glass , gauze etc with sash bbeads for securing glass including guard bars etc, size of members of window shutters as spfd in SSR Part-I , section 8, clause 8.24(b) including taking down existing complete all as specified and directed by E-in-C.

S & F 35mm thick, factory made panelled door shutter (two panel), plain, framed with 2nd class hard wood lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and stile as per IS-1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed.

Supply & Fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified & directed.

Supply & Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F Power coated Aluminium frame work in partition/doors/windows with shutter all a round and including aluminium beading,glazing cleats fixed in frames, Neoprene rubber beading/packing including 150 mm handle, 200 mm tower bolt etc complete all as specified

S&F prelaminated particle board 12mm thick, exterior grade, prelaminated both sides with decorative choice laminations fixed to aluminium frame.

S & F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane.

Supply and fix MS butt hinges, 100mm medium weight and fixed all as directed.

S & F 150 mm aluminium anodised barrel tower bolts of extruded section

S & F 150 mm extruded aluminium alloy handles , fabricated type, anodised

S&F Mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia, 300mm leng, with and including a minimum of 6 bolts and nut, four on bolt plate and two on staple plate and fixed

S&F floor door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring fixed in floor 140mm long overall length of cover plate complete all as spicified.

S&F Mortice lock, vertical type, size 100 mmMild Steel 4 levers complete all as specified

Supply & Fixing in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by EIC.

S & F GI tubing 15mm bore medium graded with all fitting and Fixed complete to walls and ceilings or laid in floors, including taking down complete all as specified.

Refixing old steel tubing and connection new or old position on wall or under floor 15 mm bore of pipe complete all as specified and directed by EIC.

S & F GI tubing 20mm bore medium graded with all fitting and Fixed complete to walls and ceilings or laid in floors , including taking down complete all as specified.

Refixing old steel tubing and connection new or old position on wall or under floor 20 mm bore of pipe complete all as specified and directed by EIC.

S&F in repair CP bib taps 15mm bore dia, fancy type, cast copper alloy capstan head chromium plated, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repairs vitreous china wash basin white of size 550x400 mm with padestal stand (ISI marked) including 32 mm CP waste coupling & PVC flexible waste pipe of min 90 cm long, flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed in repairs all as specified and directed.

S&F in repairs 15mm bore, stop valve/angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs 15 mm dia fancy type, pillar taps cast copper alloy with capstan head chromium plate screwed dwon high pressure long shank and fly nut screwed for iron pipecomplete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts, length 450 mm complete all as specified and directed.

S&F PVC flexible waste pipe with PVC cap suitable for fixing to WHB waste coupling in suitable length 32 mm dia omplete all as specified and directed. .

S&F in repairs vitreous china wash down water closet pan (Pedestal Pattern) white with 'P' or 'S' trap excluding flushing cistern and flush pipe

S & F in repairs for 10 ltr capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle incl brackets

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

M&L for Providing precast cement concrete solid building blocks or slabs type B1 1:2:4 (20mm graded aggregate) 7.5cm thick (with plain or interlocking joints as directed) setting in mortar 1:4 complete, in floor.

M & L PCC 1:3:6, 75mm thick type C2 as in plinth protection complete all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A'

Demolition of Concrete (un-reinforced) of any description and in any position not otherwise specifically provided for

Dismantling of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings,

Walling of random rubble, uncoursed stone masonry, well bonded, bedded and solidly hearted built in CM 1:4 all as specified.

M&L for brick work with Old size Fly ash ’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for Cement concrete PCC 1:3:6 in surface channels and drains complete all as specified and directed.

Material and Labour for 15 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform , and other similar situation complete all as specified and as directed.

M&L machine pressed precast interlocking paver blocks of any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-40 grade

M&L Sand filling for sand cushion under interlocking tiles or floors or in foundations complete all as specified and directed

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Dismantling water tanks of capacity exc 250ltr but not exc 500ltr and removing from site complete all as specified & directed by Engr-in-Charge.

Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks Triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I

S&F ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 15 mm dia complete all as specified & directed by Engr-in-Charge

S & F for framed work such as grills or grating etc with ends ofr bars shouldered as framed guard bars conforming to Fe-290 Gde E- 165 all as specified and directed.

S&F sheet glass ordinary quality 3mm thick and glazing with oil puty or fixed with wdn beads in squares n.exc. 0.50 sqm in each pane complete all as specified.

M&L for reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

M & L for reinforced Cement Concrete Type 1:1.5:3 (using 20 mm graded granite stone aggregate) in Beams, cantilevers, roof beams, lintels over 1.5 M span.

M&L for use and waste of form work to sides and soffits of floor or roof beams, lintles, cantlevers, shelves incl supports etc for rough finished surface of concrete.

S&F 110 /150mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints s, laid in trenches or in floors

M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:4 (with plain or interlocking joints as directed) setting in mortar 1:4 complete.

Taking down carefully concealed/casing capping point wiring copper/aluminium(light/fan/socket) complete (with fittings such as switches ceiling rose, pendents, regulators,sockets etc) and making good disturbed surface with existing specification all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring complete with 1.5 sqmm single core sheathed PVC insulated FRLSH cable 1100 V grade multistranded copper conductor of code red, blue and yellow for phase, black for neutral and green for earth of ISI marked drawn through and including PVC casing caping of suitable size with accessories ISI marked on wall/ceiling including PVC insulated copper cable FRLS 1100 V grade multi stranded for earth continuity conductor of same type and size and connected to earth dolly including provision of MODULAR boxes of suitable size MODULAR boxes,cover plate for mounting switches/sockets and regulators complete all as specified and as directed. (a) One light point controlled by one switch one way

All as per item No 2 here in before, but One Ceiling fan/ Exhaust fan point controlled by one switch one way

All as per item No 2 but one bell/buzzer point controlled by one push button on the same board with other swiches or independent with 1.5 sqmm size.

All as per item No 2.00.. But Using 2.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable for 3/6 pin 6/16 Amp socket outlet controlled by one switch on independend board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and directed .

M&L Modular switch one way, 6 Amps, 240 V complete all as specified and directed

S&F modular socket outlet 2/3 pin type,6 Amps, 240 V complete all as specified and directed

S&F socket outlet modular but 6A/16A flush,2 module type complete all as specified and as directed.

S&F switch modular 15/16A complete all as specified and as directed.

S&F in replacement lamp holder,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed

S&F call bell electrical operated complete all as specified and as directed

S&F fan regulator modular type 120w 2 module complete as specified and directed.

S&F bell switch modular type complete all as specified and directed.

S&F ceiling rose surface type with 3 terminals complete .

Taking down carefully submain wiring including batten/conduit by unscrewing from wall, ceiling and making good surfaces to match with original status as specified and directed

M&L sub main wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in PVC Casing caping of 2 run of 4sqmm PVC FRLS copper cable and 1run of 4sqmm PVC FRLS copper cable for earth wire complete all as specified and directed. Note for sub main wiring :- (i) 2 runs of wire and 1 run of earth wire will be measured as one unit i.e RM (ii) Groove Cutting ,pinning and plastering of disturbed surface etc shall deemed to be included in the quoted rate.wiring 2 run of wire and1 run of earth wire

S&F in replacement to LED street light fitting 35 Watt 230 volt AC outdoor type with high pressure die cast housing and heat resistance with complete with driver ,lamp with bracket with impact and corrision resistance including thermal management in multiple optics complete with IP -65/66 protection complete all as specified and directed.

S&F in replacement LED tube light lamp 1 x 18/20 watt ,220 V AC decorative box type with driver , holder including LED tube light connecting up with 3 Core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F 40/36W 2x2 LED Panel 2 feet x 2 feet Backlit Panel,Cool White Light (6500K) ,Recessed Panel for False-Ceiling Aluminium Housing complete all as specified and directed.

S&F in replacement of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN, 8 ways,240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces complete all as specified and directed.

S&F in replacement of MCB SPN 40 Amps 240V ,50 Hz ,breaking capacity 10 KA," C " series complete all as specified and directed.

S&F in replacement of MCB SP 06-32 Amps 240V ,50 Hz, breaking capacity 10 KA," C " series complete all as specified and directed.

S&F in repairs of sheet steel enclosure with Double door TPN 4 ways 440 volt factory fitted rated bus bars,earth bar,neutral links complete including blanking plates as required and making good the disturbed surfaces all as specified and as directed.

S&F in replacement of MCB TPN 63 Amps 415V ,50 Hz ,breaking capacity 10 KA," C " series all as directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5M depth for laying of cables,GI/CI pipe lines etc getting out including forming bottom surface to required level and gradient in hard/dense soil.complete all as specified and directed.

M&L for Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in hard/dense soil. complete all as specified and directed.

Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed.

Supply and fix in replacement of 9 watt LED Bulb retrofit type complete all as specified and directed

Material and labour earthing complete with galvanised earth plate electrode 60cmx60cmx6mm thick buried directly in ground not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level connected to galvanised earth lead 4 mm dia by means of bolts, nut check nuts and washers of galvanised iron or steel, earth lead protection pipe 15mm bore GI medium grade, watering pipe 20mm bore GI medium grade all as shown in electrical plate No 3 connected to main switch distribution board complete and testing on completion all as specified and directed by Engr-in-Charge. Note : (i) The unit rate shall also includes for excavation earth work, type of soil, pit in PCC 1:3:6 type C1 funnel with watering pipe from earth test point upto equipment to be earthed, RCc 1:2:4 type B1 cover for earth chamber, 50mm thick with 8mm dia for steel 150mm C/C both ways and 6mm dia MS round bars at handles of cover slab all as specified in addition to sl No 1 (a) to (e) and 3 of under sub heading earthing as specified on ser page No 441 of SSR Part-II-2010. (ii) The rate shall be deemed to include for taking out existing earthing complete.

Supply and fix exhaust fan steel body AC single phase 230 Volts of size 300mm sweep with blades and frame and louvers complete all as specified and directed including necessary arrangement in wall for fixing the exhaust fan in kitchen including making hole,connection with 1.5 sqmm FRLS cable from near ceiling rose.

Supply and fixing ceiling fans complete with blades, down rods, clamp,and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) hanging complete all as specified and as directed. Note:- Price includes taking out of OLD UNSV fan from site and store to AGE E/M yard as directed by Engr In charge.

Supply and lay galvanized pipe, “light class”, for pipe protection 50 mm (2") dia complete all as specified and as directed.

M&L for cutting existing GI water mains for branch connections for insertion and including new tee 80/50mm bore for branch connections in position, including jointing, earth work excavation in any type soil complete all as specified & Directed.

Supply and laying in trenches steel tube medium grade with all fitting and fixed complete to wall,tubing and ceiling or laid in floor/trenched of size 50mm (1'') dia

Supply and laying in trenches steel tube medium grade with all fitting and fixed complete to wall,tubing and ceiling or laid in floor/trenched of size 25mm (1'') dia

Supply and fixing of gunmetal gate valve with iron wheel screwed both ends for iron pipe and fixed of 50 mm dia.

M&L for construction of brick Masonarry valve pit chamber 750mm x 750mm x 750mm (internal size), 100 mm thick PCC 1:4:8 type D2 lean concrete foundation using 40 mm graded stone aggregate providing well burnt brick masonary wall of 23mm thick build in CM 1:6 rendaring 15mm thick in cement 1:6 finished even smooth using extra cement internally and 20mm thick in CM 1:4 and finished fair and even supply and fix 3.5mm thick MS sheet steel cover fixed on 50 x50x6 mm thick angle iron frame embbeded in PCC coping with locking arrangement and 1 Nos 50mm size 4 levers lock with key in duplicate Standard size and MS coats of synthatic enamel paint of approved shade over a coat of primer (Red oxide) to all exposed surface making good all disturbed surface to match surrounding complete all as specified & Directed.

M/s VILAS RATAN MENDHE (BID ID -3195672)

M/S.Chourasia Construction Company (BID ID -3195598)

M/S Ramakant Chourasia (BID ID -3195748)

SHRI RANI SATI TRADERS (BID ID -3196125)

M/S L M Chourasia (BID ID -3195240)

Bidder Name

M/S L M Chourasia

SHRI RANI SATI TRADERS

SHREE CONSTRUCTIONS

M/S.Chourasia Construction Company

M/s VILAS RATAN MENDHE

M/S Ramakant Chourasia