Execution of Civil Zonal Work for Repairs and Maintenance Works of Service Buildings (including Horticulture work) under SSE/Works/Motibagh & SSE/W/Bailyshop for the period ending up to 30.06.2027 under the jurisdiction of ADEN/works/ NGP.

A-All chapter /Code of CPWD-DSR-23 ver-1. Note:- The chapter/code are Above/

C-Execution of works involved in the work covered by various chapter of

3 mm thick translucent white acrylic plastic sheet.

Stone Aggregate (Single size) : 20 mm nominal size.

Stone Aggregate (Single size) : 10 mm nominal size.

Coarse sand (zone III).

Common burnt clay F.P.S (non modular) bricks class designation 7.5.

Hydraulic door closer tubular type Aluminium section body.

Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm.

MS heavy wt butt hinges 100x75x3.5

mild steel screw 40 mm

mild steel screw 25 mm

Oxidised mild steel sliding door bolt 300x16 mm.

Oxidised mild steel tower bolt (barrel type) 200x10 mm.

Oxidised mild steel handles 125 mm.

Mild steel screw 100 mm

Anodised Aluminium sliding door bolt 250x16 mm.

Anodised Aluminium tower bolt (barrel type) 200x10 mm.

Anodised Aluminium handles 125 mm with plate 175 x 32 mm.

MS wire nails 25-100 mm

Block board construction flush door with commercial ply on both faces 30 mm thick.

Block board construction flush door with commercial ply on both faces 25 mm thick.

Second class teak wood in scantling.

1.0mm thick decorative laminated sheet.

Water proof ply 12mm thick.

UV stabilised 2mm thick plain FRP sheet.

Ply wood 5 ply with commercial ply on both faces 6 mm thick.

Flats up to 10 mm in thickness.

Linseed oil (double boiled).

Aluminium paint

Synthetic Enamel paint in all shades

plastic emulsion paint

oilbound washable distemper / acrylic distemper

Water proofing cement paint.

Premium Acrylic exterior paint.

G.I. pipes 50 mm dia

P.T.M.T Urinal cock 15 mm dia

P.T.M.T. Bibcock with nozzle 15 mm

P.T.M.T. Stop cock (concealed) 15 mm

P.T.M.T. extension nipple 15 mm dia

P.T.M.T. extension nipple 20 mm dia

15 mm PTMT bib cock

PTMT push cock 15 mm dia.

C.P.Brass bibcock 15mm

C.P.Brass long body bibcock 15mm

C.P.Brass stop cock (concealed) 15mm

C.P.Brass angle valve 15mm

Polyethylene water storage tank with cover and suitable locking arrangement

Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore Flanged C.I. standard specials upto 300 mm dia (heavy class)

Flanged C.I. standard specials upto 300 mm dia (heavy class)

White plastic seat (solid) with lid C.P. brass hinges and rubber buffers

Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia

HP. or L.P. ball valve with polythene floats: 15 mm dia

Vitreous china angle back wash basin 600x480 mm (White)

Vitreous china orrisa type w.c. pan size 580 mm

Vitreous china pedestal type water closet

C.I. bracket for wash basin and sinks

Mirror of superior make glass 60x45 cm

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Flushing Cistern P.V.C. 10 litres capacity (low level) (White) (with fittings, accessories and flush pipe)

White vitreous china clay half stall urinal flat back 580x380x350 m m o r angle back 450x375x350 mm with waste fittings as per IS : 2556

C P brass Waste 40 MM

Bleaching powder

Polyvinyl chloride sheet 400 micron thick

Chlorpyriphos 20% E.C. I Lindane 20% E.C.

U pvc pipe single socketed 110 mm dia

Pozzolana Portland Cement

Nut and bolts with washers of all sizes

Rubber packing / insersion washer all size

Miscellaneous G I pipe fittings as nipples/ elbows/ sockets/ bends for GI pipe work.

U-PVC pipes (working pressure 4 kg/cm2 )Single socketed pipe 75m dia

H.P. or L.P. ball valve with polythene floats: 25 mm dia

H.P. or L.P. ball valve with polythene floats: 20 mm dia

Coloured Pedestal type W.C. pan 580x440 mm (European type)

FULL WAY BRASS VALVE 15 MM

Magnesium poly phosphate based concrete fast repair epoxy

Hiring of JCB Machine (in good working condition) for leveling and dressing ground / dismantling structures including disposal of debris through dumpers etc. with contractor's labour, JCB machine, machine operator, fuel, etc. The contractor shall arrange

D-All Chapters of CPWD DSR-2020 Horticulture and landscaping. Note-