CRC-DTRD-185- Patarkuchi To Meghalaya

Amount

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Finishing walls with water proofing cement paint of required shade Old work (one or more coats applied@ 2.20 kg/10 sqm) over priming coat of primer @ 0.80 litrs/10 sqm complete including cost of Priming coat.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade 13.99.1 One or more coats on old work.

White washing with lime to give and even shade Old work( Two or more coats)

Built-Up-Spray Grout (Providing, laying and rolling of built-up-spray grout layer over prepared base consisting of a two layer composite construction of compacted crushed coarse aggregates using motor grader for aggregates. key stone chips spreader may be used with application of bituminous binder( paving bitumen 60/70 ) after each layer,and with key agreegates placed on the top of the second layer to serve as a base conforming to the line,grades and cross section specified,the compacted layer thickness being 75mm (including carriage up to initial lead of 5.0 km from quarry) (including cost of testing of materials at site and laboratory as directed by the deptt.)

Providing and applying tock coat with bitumen emulsion using emulsion distributor at the rate of 0.25 - 0.30 kg per sqm on the prepared granular surface treated with primer and cleaned with hydraulic broom as per technical specification clause 503

Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous [email protected] to 5.6 % of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, level and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no. 509. complete in all respect. (including carriage of mixed materials up to 10.0 Km initial lead from mixing plant Including cost Of testing of materials at site and laboratory as directed by the deptt.) B. with polymer bitumen 70, (ii)for grading II (13mm nominal size )

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied lass beads as per IRC:35 MoSrt&H s specifications

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H's fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.

Providing ' Spakle Solar Road Studs, manufactured by Tata Solar India Ltd of size ( 125mmx125mm) 90 mm height with detachable battery, m6LEDs- three on each side for Bi-directional studs/3 LED on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per studs 700+25 gms, flash rate of 50-65 times per minutes completely water resitant and weather proof with replacement warranty and free maintenance fro one year from the date of installation of studs on rood (installation should be made using adhesive and procedures recommended by manufacturer under the supervision of their competant technician)

Providing and fixing of cautionary. mandatory and Informatory sign as per IRC:67 made of encapwlated lens reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheetng, 1.5 mm thick on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property foundation with M15 grade cement concrete 460 mm x 450 mm x 600 mm. 600 mm below ground level as drawtngs and Technical Specification Clause 801 (ii) 600 mm Equilateral Triangle

Providing and fixing of cautionary. mandatory and Informatory sign as per IRC:67 made of encapwlated lens reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheetng, 1.5 mm thick on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property foundation with M15 grade cement concrete 460 mm x 450 mm x 600 mm. 600 mm below ground level as drawtngs and Technical Specification Clause 801 (ii) 600 mm Circular

Labour for removal of mud, debris, silt from the road surface/ debries from the road sides drain deposited ot side for removoi after excavation upto 5.00 KM out side the city area etc. by truck carriage including cleaninas , sweeping the road surface as necessary loading , unloading with labour and material etc. as directed by the deptt.

Tree reflector made of heigh intensity grade retro-reflectorised sheeting fixed over aluminium sheeting of 2mm/0.28mm thick firml fixed with necessary galvanized nail.

Direction and place identification sign upto 0.9sqm size board. Providing and erecting direction and place identification retro-Reflectrorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3 fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9sqm fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level

M/S ANUJA ENTERPRISE