Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
14 Sept 2026, 1:30 pm
Single Packet
Normal Tender
No
Not Applicable
Total Value Wise
Lowest to Highest
TPI Agency
Not Applicable
90 days
Expenditure
General
55
1 condition · 1 needing a document upload
The Railway reserve the right to place orders for entire or bulk quantity on OEMs or their authorized dealers as per GTC Clause No. 16.5 of ER.( Tender specific authorization certificate must be submitted by the bidder.)
34 conditions
Authorisation: In case of authorized dealers, firm has to submit tender specific authorization/dealership from OEM along with the offer, otherwise their offer will be liable to be rejected.
Make/Brand: Maker's name [and/or Brand] must be mentioned in the offer. If no make is mentioned, it will be presumed that stores will be of OWN make.
Delivery Place :FOR SSE/MCTR (Dy.CME/CRANE/JMP)
Marking: Manufacture name & date of manufacturing (month & year) should be pasted or marked/embossed on the product box/products without affecting the functional utility of the product. The material should be supplied in properly packed condition. Equivalent IS specification will also be applicable in place of DIN specification.
Guaranty/Warranty: As per Specification/drawing. If not mentioned in specification/drawing, it will be as per IRS conditions of contract.
Confirmation: You have gone through the Tender Documents consisting of Instructions to Tenderers, General Tender Conditions and Special Conditions of Tender, and you are agreed and confirm to abide by the Instructions to Tenderers, General Tender Conditions, IRS Conditions of Contract and the Special Conditions of Tender.
MSE: If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprise(in percent of order value) with further breakup of MSE owned by SC/ST. (Information will be provided in % terms with 6 fileds; Micro owned by SC, Micro owned by ST, Micro owned by Others, Small industry owned by SC, Small industry owned by ST, Small industry owned by Others)
PVC: PVC clause will not be applicable in this tender.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions. Please refer to clause 28.0 for details.
Delivery from OEM's place: If you are dealer/authorized person, you are agreed to dispatch the stores directly from the manufacturer to the Railways consignee.
Proper address with PIN no of the Place of Inspection along with proof as per Tendered Condition must be mentioned
Valid UDYAM, specifically for Tendered Item must be submitted if applicable.
GST: (A) It shall be the responsibility of the Bidders to quote correct HSN Number and corresponding GST Rate, (B) The offer shall be evaluated based on the GST rate quoted by each bidder and same will be used for determining the inter-se-ranking. While submitting offer, it shall be the responsibility of the Bidder to ensure that they quote correct GST rate and HSN number, (C) Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate if quoted by the bidder, (D) Wherever the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase Order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the purchase order or billed, (E) Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax billed as per invoice to match the all inclusive price as mentioned in the purchase order, (F) Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.
MTC and MGC must be provided by the firm at the time of inspection as well as at the time of supply of materials.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Inspection by TPI Agency against MTC & MGC. (If P.O value below 5 Lakhs then inspection by consignee else inspection by TPI.)
Material should be properly packed in original packing of OEM to avoid and damages during Transportation.
1 condition
Offer validity: Offer must be valid for minimum 90 days from the date of tender opening.
2 locations across Bihar · 310 Numbers · 75 Set total
Brake Coil System
55266509~ER
55266509
Open - Indigenous
Goods
Patna, Bihar
₹0
Exempted
20 Aug 2026
20 Aug 2026
7 items · 310 Numbers · 75 Set total
Brake Coil System Complete Spare Coil Set in Aluminum casting concealed in bonded resin (s tator) with class 'F' insulation (Fail Safe Disc Brake Assmly.) suitable for 7.5 HP Motor; 1400 to 1600 RPM, v oltage 410-430V, 3 phase, 50Hz AC. DAT for Type- SEDB, Size- 70, for European style Brake with 7.5 Kgm t orque. Make:- Delta or Petha or ABB or Crompton or BCH. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/MCTR/JAMALPUR, ER | Bihar | 50.00 Numbers |
| Total | 50 Numbers | |
Limit switch Oil tight and dust proof, die cast aluminum housing suitable for 415 Volts (or ab ove), 50 Hz, 10Amp. AC supply for quick braking, spring loaded lever with roller 01 NO.+01 NC Auxiliary co ntact with normal angular lever as per ESSEN model type LSRS or BCH catalogue Code No.-LLGS. Mat spec n. IS-2147/1962(or latest), IES: 60947-5-1, IP-65 or similar of make- BCH or L&T or Jeevan/Schineider or SIE MENS or ESSEN. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/MCTR/JAMALPUR, ER | Bihar | 200.00 Numbers |
| Total | 200 Numbers | |
Air brake direct on-line starter wall mounting type with push button control suitable for 3 pha se 50Hz, 415v, for 20HP motor. The contactor coil of the starter must be suitable for 3 phase, 50hz, 415 v a c supply the starter shall be complete with overload and no load protection. Mat. & Specn is : 8544 (part-1) . The starters are as per is :13947-4-sec -1, 1993. Make : BCH or SIEMENS or Havells or Jeevan or SCHNEIDER or L&T. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/MCTR/JAMALPUR, ER | Bihar | 10.00 Numbers |
| Total | 10 Numbers | |
Two way Pendent type push button assly. with 2 Nos. of normally open inching type push but ton (indicated UP and DOWN button), suitable for 415V (or above) 10 amps (or above) with cable entry arra ngement through uPVC nipple as per SIEMENS model no.-3SB5802-8AC3 or similar. Make - BCH or Schineid er or SIEMENS or ESSEN or SNT. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/MCTR/JAMALPUR, ER | Bihar | 25.00 Numbers |
| Total | 25 Numbers | |
Air brake direct on-line starter with 2 sets of 3 pole contactor, each set control separately by 415v, 50 hz, ac contactor coils. Detail follows as : 01 set of contactor coil is to be controlled by the forward direction of rotation through an inching type push button and the other set through another inching button to control the reverse direction of 5 hp, 3 phase, 50hz, 415 volts, ac motor. There must be electrical interlo cking contact to prevent both sets of contactors to close simultaneously. Each of above push buttons shoul d have one normally closed auxiliary contacts and one stop push button are required. The starter shall be c omplete with over load, shall be wired and shall be provided with power plug and socket with locking arran gement as shown in schematic diagram drg. no. 1736/23 and 1737/23,alt.1 Mat. Specn is : 8544 (part-1), is :13947-4-sec- 1/1993. each starter is to be provided with 02 nos. power plug and socket and 2(two) nos. co ntrol plug and socket. Maximum dimension 280 mm(b) x 360 mm(l) x 162 mm(t). The starters are as per is :13947-4-sec -1, 1993. Make :BCH or SIEMENS or Havells or Jeevan or SCHNEIDER or L&T. [ Warranty Peri od: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/MCTR/JAMALPUR, ER | Bihar | 25.00 Numbers |
| Total | 25 Numbers | |
(i) 4 Pin plug & Socket, 30A, 415V, AC, 3P+E. Make:- BCH / Havells / SIEMENS /Jeevan. (ii) 5 Pi n plug & Socket, 30A, 415V, AC, 3P+N+E. Make:- BCH / Havells /SIEMENS / Jeevan. 1 set consisting of SL No . (i) 1 no.each & SL No. (ii) 1 no. each.Accepted Make:- BCH [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/MCTR/JAMALPUR, ER | Bihar | 50.00 Set |
| Total | 50 Set | |
1 set consisting of following two items as in Sl No. A & B (A) Direct On-line Starter with 2 sets of 3 pole / 4 pole contactors (2 sets AC contactor coils, 25 AMP each), each set controlled separately by 415 V, 50HZ AC Contactor Coils. One set of Contactor Coil is to be controlled by the forward direction of rotation through an Inching Type Push Button and the other set through another Inching Button to control the rever se direction of 7.5 HP, 3 Phase, 50HZ, 415Volts, AC Motor. There must be electrical interlocking contact to prevent both set of contactors to close simultaneously. Each of above Push Buttons should have one norma lly closed auxiliary contact and one Stop Push Buttons are required. The starter shall be complete with ove r load, shall be wired and shall be provided with Power Plug and Socket with locking arrangement as shown in schematic Drawing No. 1736/23 and 1737/23 Alt.-1. Each Starter is to be provided with 2 Nos. Power Plu g and Sockets and 2 Nos. of Control Plug and Sockets. Maximum dimension of the Starter should not excess ed 280mm (B) X 430mm (L) X 175mm (T) irrespective of Dimension. Material Spec.: IS: 13947 Pt.-4 Sec.-1, 1993. Make: BCH or SIEMENS or Havells or Jeevan / SCHNEIDER or L&T. Qty. 1 no. (B) Supply & Fitment of Material for 7.5 HP DOL Starters (Individual) in SL No. (A) of 25T Universal JMP Jack. Sl No. (i) Up indicating L ED Lamp 415V AC (Red), Qty-1 No. (ii) Down indicating LED Lamp 415V AC (Red), Qty-1 No. (iii) Trip Indicat ing Lamp 415V AC (Amber), Qty-1 No. (iv) ) 415V AC 2NO+2NC FS-C 45MM Control Relay, Qty-1 No. (v) 3 P hase (RYB) indicating LED Lamp, (vi) Reset Button to release overload relay in case of tripping, Qty-1 No. & (vii) 30A 3 way Terminal Block, Qty-2 Nos. (1 set consisting of Sl No. i to vii). Make: BCH or Siemens or L&T or C&S or Jeevan. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/MCTR/JAMALPUR, ER | Bihar | 25.00 Set |
| Total | 25 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
10.1736-23.PDF
ATTACHMENT
11.1737-23alt-1.PDF
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].