Repair/Replacement/Maint of LT UG Cable and Maint of LT Panels alongwith connected Items in Domestic Area at AF Stn Bhisiana

Amount

Excavation in trenches not exc. 1.5 mtr wide and n.exc 1.5 mtr depth for foundation of poles/laying of cables/stay/strut etc n.exc 10 Sqm on plan and getting out in soft/loose soil.

Returning, filling including spreading, leveling watering and well ramming in layers not exceeding 25 cm as directed.

Removing excavated material (soil) n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point.

M&L for providing Fazilka river sand as in sand cushioning to under ground cable including punning down of sand in layers as specified and as directed.

M&L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick n.exc 10mm complete all as specified and directed.

Relaying of bricks over cable for protection, obtained from taking down of cable at item Sl No 13,14 & 15 including shifting from obtained place to required site.

M&L for making bore below the road for crossing the GI pipe light grade 50 mm dia for cable protection and fill the putty on both sides of the GI pipe after crossing the armoured cable to avoid the water inside complete all as specified and directed by Engr-in-Charge.

M&L for making bore below the road for crossing the GI pipe light grade 80 mm dia for cable protection and fill the putty on both sides of the GI pipe after crossing the armoured cable to avoid the water inside complete all as specified and directed by Engr-in-Charge.

M&L for making bore below the road for crossing the GI pipe light grade 100 mm dia for cable protection and fill the putty on both sides of the GI pipe after crossing the armoured cable to avoid the water inside complete all as specified and directed by Engr-in-Charge.

M&L for galvanized steel tubing 100 mm light garde (ISI marked) for protection of cable fixed to pole/walls or laid in floors, road crossing ducts with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and directed.

All as per item No. 10 above but having size 80 mm.

All as per item No. 10 above but having size 50 mm.

Taking down LT cable 1100 Volts grade heavy duty UG cable XLPE/PVC of size from 185 to 300 sq mm, 3½ core.

Taking down LT cable 1100 Volts grade heavy duty UG cable XLPE/PVC of size from 70 to 150 sq mm, 3½ core.

Taking down LT cable 1100 Volts grade heavy duty UG cable XLPE/PVC of size from 4 to 50 sq mm, 2 to 4 core.

M&L for taking down unserviceable LT UG cable any type from trenches and removing the fault and relaying of LT UG cable after rectifing the fault and making cable in serviceable condition of 1100 V grade UG cable of size from 185 to 240 sqmm, 3½ core including relaying of bricks and sand complete all as specified. Note : (i) Striaght throuigh joints measured and paid separately. (ii) Excavation, Returning, filling, removal, will be measured and paid separately.

M&L for taking down unserviceable LT UG cable any type from trenches and removing the fault and relaying of LT UG cable after rectifing the fault and making cable in serviceable condition of 1100 V grade UG cable of size from 70 to120 sq mm, 3½ core including relaying of bricks and sand complete all as specified. Note : (i) Striaght throuigh joints measured and paid separately. (ii) Excavation, Returning, filling, removal will be measured and paid separately.

M&L for taking down unserviceable LT UG cable any type from trenches and removing the fault and relaying of LT UG cable after rectifing the fault and making cable in serviceable condition of 1100 V grade UG cable of size from10 to 50 sqmm, 2 to 4 core including relaying of bricks and sand complete all as specified. Note : (i) Striaght throuigh joints measured and paid separately. (ii) : Excavation, Returning, filling, removal, will be measured and paid separately.

Laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 240 Sq mm 3.5 Core with aluminum thimble of same size complete all as directed. Note : Cable will be issued under Sch 'B'.

Laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 185 Sq mm 3.5 Core with aluminum thimble of same size complete all as directed. Note : Cable will be issued under Sch 'B'.

Laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 300 Sqmm 3.5 Core with aluminum thimble of same size complete all as directed. Note : Cable will be issued under Sch 'B'.

Laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 120 Sq mm 3.5 Core with aluminum thimble of same size complete all as directed. Note : Cable will be issued under Sch 'B'.

Laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 95 Sq mm 3.5 Core with aluminum thimble of same size complete all as directed. Note : Cable will be issued under Sch 'B'.

Laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 70 Sq mm 3.5 Core with aluminum thimble of same size complete all as directed. Note : Cable will be issued under Sch 'B'.

Laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 35 Sq mm 3.5 Core with aluminum thimble of same size complete all as directed. Note : Cable will be issued under Sch 'B'.

Laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 25 Sq mm 4 Core with aluminum thimble of same size complete all as directed. Note : Cable will be issued under Sch 'B'.

Laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 Sq mm 2 Core with aluminum thimble of same size complete all as directed. Note : Cable will be issued under Sch 'B'.

Laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 10 Sq mm 2 Core with aluminum thimble of same size complete all as directed. Note : Cable will be issued under Sch 'B'.

Laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 6 Sq mm 2 Core with aluminum thimble of same size complete all as directed. Note : Cable will be issued under Sch 'B'.

Laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 4 Sq mm 2 Core with aluminum thimble of same size complete all as directed. Note : Cable will be issued under Sch 'B'.

Supply, laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 150 Sq mm 3.5 Core with aluminum thimble of same size complete all as directed.

Supply, Laying, jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 50 Sq mm 3.5 Core with aluminum thimble of same size complete all as directed.

M&L for cable jointing kit for 1100 volts grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 35 to 95 sqmm, complete all as directed at site.

All As per Item No. 33 above but for cable of size 120 to 150 sqmm.

All As per Item No. 33 above but for cable of size185 to 240sqmm.

M&L for PCC (1:3:6) type C-1 with 20 mm gradded stone aggregate for copping of poles Pedestal (PCC) or complete all as specified and directed by Engr-in-Charge.

M&L for stretching the ACSR conductors from the poles of any size/type, with the help of T&P, taking all safety precautions complete all as specified and directed by Engr-in-Charge.

M&L for Trimming the trees branches from OH line upto 3 mtrs including cleaning the site and removing of tree branches from site complete all as directed by Engr-in-Charge.

S&F in replacement for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meter deep below normal ground level connected to galvanized earth strip of size 32x6 mm, 7.5m long means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR part I connecting to earthing test point and testing on completion with and including PCC pit in mix 1:3:6 type C-1 with RCC 1:2:4 type B-1, 40mm thick cover reinforced with 6mm dia MS bars 3 Nos both ways with lifting book made out of 6mm dia bar, watering arrangement with funnel and wire mesh and 20mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work, complete all as directed.

S&F in replacement of MCCB 40 Amps, 4 Pole, 16/25 KA with thermal magnetic settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.

S&F in replacement of MCCB 63 Amps, 4 Pole 16/25 KA with thermal magnetic settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.

S&F in replacement of MCCB 100 Amps, 4 Pole 25 KA with thermal magnetic settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.

S&F in replacement of MCCB 125 Amps, 4 Pole 16 Ka with thermal magnetic settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.

S&F in replacement of MCCB 160 Amps, 4 Pole 16 Ka with thermal magnetic settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.

S&F in replacement of MCCB 200 Amps, 4 Pole 25/26KA Ka with thermal magnetic settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.

S&F in replacement of MCCB 250 Amps, 4 Pole 25/26 KAwith thermal magnetic settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.

S&F in replacement of MCCB 315 Amps, 4 Pole 25/35KA with thermal magnetic settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.

S&F in replacement of MCCB 400 Amps, 4 Pole 36/37 KA with thermal magnetic settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.

S&F in replacement of Aluminium Thimble of size:-

M&L for preparation of old steel surfaces including welding work of door, hinges with locking arrangement and applying one coat of synthetic enamel ivory paint (Smoke grey) to steel LT Panel/bus bar box and junction boxes surface after disconnecting the electrical connections and reconnecting LT cables after painting, complete as specified and directed by Engr-in-Charge.

S&F of sheet metal (MS) bus bar box single door, outdoor type weather proof, size 300x300x200mm mounted on ground with iron angles (25x25x4mm) having alluminium bus bar 4 nos, rated 100 Amp all as specified and directed by Eng-in-Charge.

Servicing of LT panel of any size including disconnecting of supply, removing brunt out wires, cable joints, thimbles, MCCBs, nuts, bolts and bus bars and fixing new thimbles, wire, MCB, MCCB, bus bar etc and restore the supply after connecting and testing. Thimbles, MCBs, MCCBs and bus bars are measured and paid separately.

Aman Enterprises

M/s Luxmi Constructions

Rasvinderpalandco