Providing of cement concrete road including drainage facilities to the LGR free patta distributed area at Maduvupet in Lawspet constituency, Puducherry

Amount

Code No:2.27A.1:- Supplying and filling with gravel (excluding rock) in trenches , plinth,sides of foundations etc . In layers not exceeding 20 cm in depth consolidating each deposited layers by ramming and watering etc .complete including all lead and lift

CodeNo.2.31:- Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Code No:2.8.1:- Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan)including dressing of sides and ramming of bottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m -All kinds of soil.

Code No:4.3.1:- Centering shuttering including struttings, propping etc. and removal of form work for foundations, footings , bases for columns.- Using steel sheet with M.S.frames

CodeNo.4.5.1:- Providing and fixing upto floor five level precast cement concrete string or lacing courses , copings, bed plates, anchor blocks, plain window sills, shelves ,louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering,shuttering complete - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Code No:4.12B. Providing, laying ,spreading and graded stone aggregate to wet mix acadamspecification including premixing the material with water at OMC in mechanicalmix plant carriage of mixed material bytipper to site, laying in uniform layers with paver in sub-base / base course onwell prepared surface and compacting with smooth 3 wheeled steel roller to achievethe desired density (As per MoRTHspecification, 4th Revision)

CodeNo.5.22.7:- Steel reinforcement for R.C.C.work including straightening , cutting , bending,placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more

Code No:7.1A.MO:- Cement concrete 1:4:8 mix with stone aggregate 40mm nominal size in foundation upto a depth of 1.5 metres below ground level and upto height of 1.5 above ground/bed level.

Code No:7.1B.MO :- Cement concrete 1:3:6 mix with stone aggre gates 20mm nominal size mechanically mixed and vibrated in foundation upto a depth of 1.5 metres below ground level and 1.5 metres ground/bed level.

Code No:7.2.MO :- Plain cement concrete m-15 mix with stone aggregates 20mm nominal size mechanically mixed and vibrated in foundation upto a depth of 1.50 metres below ground level and/or 1.50 metres above ground/bed level.

Code No:7.23A.MO :- Providing and fixing premoulded bitumen joint filler, for expansion joints including the cost of sealing compound and priming coat - 12 mm wide

CodeNo.10.25.2:-Steel work welded in built up sections/framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder,railings, brackets,gates and similar works

CodeNo.11.3.1:Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neatcement, including cement slurry, but excluding the cost of nosing of steps etccomplete - 40mm thick with 20mm nominal size stone aggregate

Code No:13.16.1:- 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand)

M BALAMURUGAN

BOOBALAN M

K Ramayan

Balaraman