CA NO CWEAFJ-36/2026-27 REPAIR/RESURFACING OF ROADS IN DOMESTIC AREA AT AF STATION JAMMU UNDER GE (AF) JAMMU

M&L for repair to pot holes size not exceeding 1.00 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth, and making good by applying bituminious tack coat @ 5 kg per 10 sq m (Using VG-10), putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10sq m , blinded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm complete all as specified and directed by Engr-in-Charge.

M&L for premix bituminous macadam using paving bitumen (VG-30) any penetration @ 4% by weight of total mix, laid using self propelled mechanical paver/rolled and compacted to required gradient and camber consolidated average thickness n exc 50mm using 8 to 12 Tonne Power roller complete all as specified and directed. Note : Please note that repairs to patches where depressions over 5mm thick shall also be carried out under this item. Contractor's Quoted Rates for this item shall be deemed to include for cleaning of surface and removal the rubbish material to a distance not exceeding 50m from the starting point omplete all as specified and directed by Engr-in-Charge.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing cacked mud etc. Sweeping brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc including scarify surface if required complete all as specified and directed by Engr-in-Charge.

M&L for bituminous premix asphaltic semi dense concrete consolidated thickness 40mm with 5.5% of binder content by weight to total mix, using Viscosity Grade paving bitumen of grade VG-30 prepared in hot mix plant and laid by using self propelled mechanical paver, rolled and compacted to required camber and gradient to achieve uniform smooth surfaces and rolled with 8 to 12 tone power roller/tandem vibrating roller complete all as specified and directed by Engr-in-Charge. Note:- 1. Premixed carpet shall be laid using self propelled mechanical paver and prepration of mix shall be done using computerised hot mix plant. 2. The exact quantity of bitumen to be used shall be determined by design mix by Marshal method.

M&L for marking the dashes, arrow etc not exc 10 cm wide on road surfaces, using hot applied thermoplastic road marking plant 2.5mm thick mixed with redium glass beads @ 250gm/Sqm with automatic machine to provide reflectivity and night vision ( approximate temperature being 200 degree at the time of laying) including cleaning the surface of all dirt and other foreign materials, demarcation at site and control including taking out and refixing of old eye/solar stud complete all as specified and directed by Engr-in-Charge.

Supply and fixing solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturer instructions etc and including taking down of exiting cat eye, all as specified and directed by Engr-in-Charge.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and including MS stud of suitable size as per manufacturer instructions complete all as specified and directed by Engr-in-Charge.

Taking down of existing convex mirror and supply and fixing new convex mirror of size of 800mm fixed with pole including other necessary accessories as required on ground including excavation for pole and PCC 1:2:4 for fixing as required complete as per manufacturer instructions etc all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector redium type of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 using 20mm crushed stone aggregate complete all as specified and directed by Engr-in-Charge.