PERIODICAL SERVICES CAMOUFLAGE PAINTING AND CERTAIN REPAIRS TO BUILDINGS AT AF STN NATHATOP UNDER GE (AF) UDHAMPUR

Amount

Preparing old plastered or un-plastered surfaces of walls including cornices brooming down with wire brushes including removal of shrubs vegetation, grass and applying one coat of white lime wash complete all as specified and as directed. Note: Unit rate quoted shall include removing of nails, making good holes, cracks etc, work in patches and in narrow widths, spreading and removing covering to doors, windows, floor fittings etc to protect them from splashes, removing and replacing furniture movable cup boards etc and washing floors, cleaning glass, joinery, electric fittings, wiring etc of drops and splashes and leaving premises, clean and dry.

All as per serial item 1 here-in-before but on ceiling.

All as pr Sril item No 01 above but one coat of oil bound distemper on old plastered surfaces of walls, tint and shade after filling putty or white cement to holes, cracks and uneven surfaces etc and where required complete all as specified as approved by the Engr-in-charge. Note : Contractor shall have no claim for colour / shade dark or light what so ever is required at site.

M&L One coats of exterior acrylic paint of any shade in camouflage pattern as approved by GE on old plastered surfaces of walls including preparation of old surfaces as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge, Make : Apex of Asian/Excel of Nerolac/Weather shield of ICI Dulux

Taking down cement or cement lime plaster, any description on brick or stone walls etc, including raking out joints, racking for key, scrubbing down with water etc complete all as specified and as directed including removing rubbish to out side the MOD land all as directed.

M&L for 10 mm thick rendering on fair faces of brick/concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified.

M&L for 15 mm thick rendering in cement mortar 1:4 on brick masonry , finshed even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufactures instruction complete all as specified and as directed. Note : WPC will be measured and paid for separately.

M&L for two coats of exterior acrylic paint of any shade in camouflage pattern over a coat of primer as approved by GE on new plastered surfaces of wall including preparation of new surfaces as per manufacturer’s instructions complete all as specified and as directed. Make : Apex of Asian/Excel of Nerolac/Weather shield of ICI Dulux.

Supply only Liquid water proofing compound conforming to latest IS specifications.

M&L for Racking out joints and pointing to random rubble or polygonal rubble un-coursed or brought up to courses in CM 1:3 complete all as specified and as directed.

M&L for flush pointing to random rubble masonry uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed.

Preparation of old painted wood and wood based surfaces of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. Note : Unit rate quoted shall include taking down, cleaning as directed and re-fixing blinds and fittings, picture, rods, cornice poles and small items of builder's hardware such as door knobs, finger plates, hooks etc, use of dust sheets and other covering for the protection of fixture, fittings, furniture etc shifting of movable cupboards and furniture as required and replacing in position, work in patches including matching with existing work and removing all splash drops, dirt etc and leaving premises in a clean state.

Preparation of old painted steel and iron surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. Note: Unit rate quoted shall include taking down cleaning as directed and refixing blinds and fittings, picture, rods, cornice poles and small items of builder's hardware such as door knobs, finger plates, hooks etc., use of dust sheets and other covering for the protection of fixture, fittings, furniture etc shifting of movable cupboards and furniture as required and replacing in position, work in patches including matching with existing work and removing all splash drops, dirts etc and leaving premises ina clean state.

Painting lines, dashes, arrows, letters etc on roads, pavements and the like exc 10 cm wide with road marking paint white as in helipad all as specified and directed.

Writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 cm height all as specified with thick synthetic enamel paint over a coat of synthetic enamel paint over a cot of sysnthetic enamel paint as base of writing letters all as specified.

M&L for Varnishing one coat of wood surfaces of any description, over 10 cm width or girth including preparation of old surfaces complete all as specified and as directed.

M&L for uprouting of small plants/brushes/roots from walls & making good to distrubed surface with brick work in CM 1:4 and plastering in CM 1:4 on both sides of wall, area of surface n.exc 30 cm x 30 cm complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or described) from aluminium frame, glazed with putty or fixed with beads complete all as specified and as directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square n. exc. 0.5 Sqm in each pane complete all as specified and as directed.

M&L 4 mm thick figured glass, pin head type, glazing with oil putty squares .exc. .5 sqm each pane complete all as specified.

S&F 5mm thick tinted sheet glass ( one side mirror finish) in aluminium frame including necessary rubber gasket and aluminiumm snap beading complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any descriptions, in Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and directed.

M&L 50 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base of floor finished fair and even complete all as specified and directed.

M&L 50 mm thick PCC 1:2:4 type B2, using 40 mm graded aggregate as in paving/path finished fair and even complete all as specified and directed.

S&F glass dividing strips, 3 mm thick 38 mm with inserted in position to confirm to design complete all as specified and directed

RAMAN CONSTRUCTION CO

KESAR CONST CO

RANBIR ENTERPRISES