Construction of Central Laboratory, Auditorium and Guest House at Koinadhora with Boundary Wall under SOPD during the year 2019-20.

Amount

EARTH WORK IN EXCAVATION

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.

(A) Up to a depth of 2.00m below the existing ground level.

(a) In ordinary soil

Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered)

(a) Upto a depth of 1.5 metre

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.

(c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified.

(a) Within Guwahati city only

Extra lead per km truck carriage for sand gravel beyond the initial lead of 8 km.

CEMENT CONCRETE WORKS:

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).

(a) In prop 1cement: 3 sand :6 coarse aggregate by volume

(b) In prop 1cement: 4 sand :8 coarse aggregate by volume

Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete.

c) 100mm thick

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

REINFORCED CEMENT CONCRETE WORKS

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)

(I) Using Mixer Machine

(A) In substructure up to plinth level

Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

a) M15 grade concrete or Prop. 1:2:4

Using batching plant/RMC/ Truck mounted batching plant including Transit mixer and concrete Pump

p) Using admixture , plasticiser etc

c) M25 grade concrete

SHUTTERING & FORM WORK

TIMBER SHUTTERING ( FORM WORK)

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:

Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.

(b) Using 25mm thick plank

Sides of tie beams, grade beams etc. at or below ground level.

(b) Using 25mm thick plank

Columns, Pillars, Posts & Strut

(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face

(ii) Using 25mm thick plank

(b) Circular or curved in plan (Using 38mm thick plank)

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

(a) For depth not exceeding 1.0M.

(ii) Using 25mm thick plank

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.

(a) Floors etc. upto 200mm in thickness.

(ii) Using 25mm thick plank

Sloping or Battering sufaces such as sloped slabs etc. including folded plates.

(a) Where inclination to horizontal plane does not exceed 30o requiring shuttering only on the underside.

(ii) Using 25mm thick plank

Vertical surface such as walls (any thickness), parapet walls, partitions, walls of septic tank, inspection pit and the like including attached pilasters, butresses, plinth and string courses and the like.

(ii) Using 25mm thick plank

Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc.

(ii) Using 25mm thick plank

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank)

Providing form work of ordinary timber planking and removal of the same in edges of slabs and breaks in floors and walls etc. of in-situ reinforced concrete works upto first floor level.

(a) Thickness not exceeding 200mm.

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.1.1 & 3.1.3(b).

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.1.3(a).

Providing scaffolding using L&T-Doka access scaffold system upto a height of 40m. supported by frames of timber H-beams, bracings including suitable couplers, pins, tower spindles and 2nd class timber plank platforms complete as specified and directed by the department. (measurement to be taken on elevation area of the building/ structure).

MASONRY WORKS:

BRICK WORKS ( CONVENTIONAL / FLY ASH )

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.

(a).Brick on flat soling.

(c).Stone soling of thickness 150mm.

Filling sunken floor with broken jhama brick bats and sand including compacting and supplying of materials complete as specified and directed for all levels.

Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.

(I) In Sub-structure upto plinth level including dewatering if necessary

(b) In proportion 1:4.

(II) In superstructure above plinth level up to 1st floor level.

(b) In proportion 1:4.(1 cement:4 sand)

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)

(A) 112mm thick brick wall

(a) In cement mortar in proportion 1:4. (1 cement:4 sand)

Extra for brick walling for each subsequent floor or part thereof above the 1st floor level.

(a) 112mm thick brick/ R.B wall

Superlight Weight Autoclaved Aerated concrete Block work using Grade-I AAC block of size 625x240 mm of different thickness of compressive strength 40 kg / sqm having dry density 550 to 650 kg/ cum conforming to IS- 2185 Pt-3 or pt-4 in cement morter of prop 1:4 including racking out joints and curing complete as specified & directed . ( protruding rod is to be provided at every 3 course interval and will be measured and paid seperately )

(II) In superstructure above plinth level up to 1st floor level.

(c) 125mm thick wall

Extra for AAC block walling for each subsequent floor or part thereof above the Ist floor level.

(iii) 125 mm thick wall over item no 4.4.2 (II) ( c)

CEMENT CONCRETE FLOORING

25 mm thick cement concrete topping 1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 12 mm nominal size) finished with a floating coat of neat cement finish to be laid in panels including curing complete as directed.

Providing and fixing glass strips in joints of cement concrete flooring /Terrazo flooring in all level

(a) 25 mm wide

(i) 4 mm thick

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor.

(a) 15 mm thick

Supplying, fitting and fixing 38mm thick (finished size) wooden flooring with sal wood plank butt jointed, fitted on sal wood joist of size 100mm x 125mm spaced not more than 900mm apart fitted with 16mm dia bolt and nuts with iron clamp of 50mm x 5mm size inserting in the cement concrete floor base (floor base to be measured and paid separately) including providing 25mm thick damp proof course with water proofing compound as recommended by the manufacturer over C.C floor base including providing kiricide oiling two coats to the timber joists, underside of the flooring planks, two coats of anti-corrosive paint to the iron works, including providing ventilation gaps for the timber works of specified size (75mm x 75mm) covered with welded mesh fabrics at the face of the gap including dressing, levelling, finishing complete as specified and directed by the department at all levels (measurement shall be taken at the finished area of the works).

TILES WORKS

CERAMIC TILES

B) ON WALLS

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).

c ) Delux range Somany/ Orient/Nitco/Varmora Make

i) Of size 300mmx450mm and above

VITRIFIED TILES

A) ON FLOOR

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)

b) Executive range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make

i) Of size 800mmx800mm

KOTA STONE SLAB / SAND STONE FLOORING

Kota-stone slab flooring of 18 mm thick over 20mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

(2) 600mm x 900mm and above

Kota stone slab of 18 mm thick in riser of steps, skirting, dado and pillars laid with 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete.

(2) 600mm x 900mm and above

Extra for nosing in steps of red or white, fine dressed and rubbed with sand stone.

GRANITE FLOORING

Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department).

(i) Normal Quality

(i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)

MARBLE FLOORING

18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels.

(i) Dungri slab

ANTISKID TILES

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.

(A) CERAMIC

i)Normal range (Sizes 300 mm x 300mm and above)

(a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate

CEMENT PLASTERING

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

a) In cement mortar 1:3

b) In cement mortar 1:4

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

A) On rough side

a) In cement mortar 1:3

b) In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for providing and mixing water proofing materials in cement mortar in prop as recommended by the manufacturer including curing complete as directed.

i) 10 mm thick plaster

b) In cement mortar 1:4

ii) 15 mm thick plaster

b) In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed

Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed.

a) On Single coat plaster

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed.

a) On Single coat plaster

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed.

a) On Single coat plaster

b) On two coat plaster

15 mm thick plain cement mortar bands in cement mortar 1:4 in width including curing complete as directed.

A) Up to 300 mm width

a) Flush band

ROOF TREATMENT

Grading roof for water proofing treatment with

(a) Cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size)

BLOCK BOARD SHUTTERS

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws.

a) Decorative type face panel and block board core.

(ii) 35 mm thick .

M.S GRILL WORK

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws.

I . Plain grill

(c) Fixed to Brickwork/P.C.C/R.C.C.

CASEMENT WINDOW UPVC

Supplying and installing uPVC- Casement Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC sections of wall thickness 2.4mm, multichambered with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent.

a) Single leaf Side hung Window using uPVC section of size 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash. With 5mm clear float glass (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

CASEMENT DOOR UPVC

Supplying and installing uPVC- Casement Door made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC sections of wall thickness 2.4mm, multichambered with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, locking arrangement, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent.

(b) Double leaf Side hung Door with a Dummy Mullion - French Door using uPVC section of size 58mm x 69mm x 2.4mm thick wall for frame, 58mm x 109mm x 2.4mm thick wall for glass sash, 58mm x 61mm x 2.4mm thick wall for dummy mulion, Aluminium threshold at bottom. (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

i) Using 5mm clear glass

P.V.C. DOORS & DOOR FRAMES

Providing, fitting and fixing 40mm x 48mm wood reinforced PVC chowkhats fixed to the columns / stiffeners / walls with necessary holdfast / sleeves etc. as specified and directed at all levels.

Providing, fitting and fixing 24mm/ 29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately)

a) 24mm thick

DISTEMPERING

f) Distempering with dry distemper of approved brand and manufacture(two coats)and of required shade on new wall surface to give an even shade, over and including priming coat of white primer after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth.

i). Extra over item no (f), (g) and (h) above for distempering every subsequent coat of distempering with dry distemper of approved brand and manufacture.

j). Extra over item no. (f) above for distempering with dry distemper on ceiling and or sloping roof.

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)

(i) Thickness = 1.5 mm thick

PAINTING ON WOOD AND WOOD WOOD BASED SURFACES

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting.

(a). With ready mixed paint , Wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.

(i).Surfaces over 100mm in width or girth.

a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

PAINTING ON STEEL AND OTHER METAL SURFACE

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.

a). With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

(i).Surfaces over 100mm in width or girth.

a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

(ii).Surfaces up to 100mm in width or girth.

a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

SPECIAL WATHER PROOF COLOURING

Finishing old/new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Dulux (ICI) paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

ALUMINIUM FITTINGS

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )

a) Sliding door bolts

i) 300mm x 16mm

b) Tower bolts

i) 300mm x 12mm

c) Door handles

iii) 150mm

REINFORCEMENT

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level)

a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL

(ii)Super Ductile (SD) TMT reinforcement bars

c) ISI approved Mild steel reinforcement bar(M.S.Bar)

Extra over item 18.1.1(a,b,c) for each subsequent floor or part thereof above first floor level.

BEAMS AND JOISTS

Structural steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint (up to 4.6m height) from plinth level including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed.

b) In flat up to 25mm thickness

c) In M.S. angles, channels, Tees etc.

COLLAPSIBLE / ROLLING SHUTTERS

Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.

ANGLES/ FLATS/ BOLTS AND NUTS

Supplying fitting and fixing M.S.angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed.

a) M. S. Angles…….

b) M. S. Flats…….

c) M. S. bolts & nuts…….

DOOR FRAMES

Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). (a) 1.25mm thick sheet (i) Size 90mm x 60mm (Single rebate)

STEEL RAILING

Providing and fixing Stainless Steel ( Grade 304 ) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing,polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge. ( For payment, only weight of Stainless Steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners etc will be considered)

PLINTH PROTECTION AND DRAIN

Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.

i). 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm.

MACHINE DRIVEN PILES

Providing cast in-situ machine driven reinforced cement concrete piles of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings including using of Bentonite solution. (Reinforcement to be measured and paid seperately as per item no. 21.4.1)

C) UNIFORM PILE

(II) Concret garade M25

v) Pile dia 400 mm

MISCELLANEOUS

Extra for using admixture & plasticiser

(b) RCC grade M25

iv) Pile Dia 400 mm

Empty boring for specified diameter piles from ground level to cut-off level.

f) Pile Dia 400 mm

REINFORCEMENT

Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc)

(A) TMT bar made of Primary producer (From Primary producer)

LOAD TEST ON PILES

ROUTINE TESTS

Routine test for test loading to 1.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)

Initial test for test loading to 2.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)

Integrity testing of pile using low strain/ sonic integrity test/sonic echo test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust and chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of engineer in charge.

SURFACE PREPARATION

Preparing the RCC surface in roof slab, chajjas, terraces, sunken slabs, septic tank, OH tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels.

WATER PROOFING OF CHAJJAS, ROOF SLABS, TERRACES, SUNKEN SLABS, SEPTIC TANK,OH TANK, RAFT SLAB IN BASEMENT, WALLS ETC.

(A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.: (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ratio 1:2 as a prime coat. (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals) @ 15% by weight of cement. (iii) 1mm thick coat of Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals) mixed with cement in the ratio 1:2 as final coat.

Demolishing R.C.C./ P.C.C. pile head of different diameters carefully without disturbing the remaining portion of the pile including opening out of the pile head to be demolished by excavating the earth upto required depth and clearing the debris as directed.

Jungle clearence including uprooting of vegitation, grass, brush-wood, sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm

Providing and fixing galvd. / M.S. tube (light grade) outlet (spout) in cement mortar 1:3 including cutting and making good the wall

(a).25mm bore - 300mm long.

Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed.

b) 75mm thick slab

PRE CONSTRUCTION ANTI - TERMITE TREATMENT

Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment in the back fill in immediate contact with the foundation structure after completion, column, wall etc. to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emulsion @ 5 (five) litres per square meter towards the concrete and masonry walls so as to ensure earth in contact with the structure well treated - with chemical (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying in the junction of walls, column with the floor before laying floor and after operation of item no. 26.1.3 above making a channel 30mmx30mm all over the walls and making rod holes @ 150mm apart up to ground level below and applying emulsion @ 11 litres per square meter of vertical plinth wall surface inside the building so as to soak the soil with the emulsion up to the ground level and refill the holes and channel with the original materials obtained in making channels (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying the soil along the external perimeter of the building (after construction completed) to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along the line @ 150mm apart to a depth of 300mm and applying emulsion @ 4.5 litres per running meter ensure moistening of the soil with emulsion (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified.

a) In exposed surfaces or in trenches.

(iv) 75mm dia.

EUROPEAN TYPE WATER CLOSET

Providing fitting and fixing Vitreous china Dual Flush / Floor Mounted Coupled / Extended water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)

A) Parryware make

a) White

(i) Universal Closet S Trap (Cat No.C0271) (Anglo Indian) (inclusive of seat cover)

AUTOMATIC FLUSHING CISTERN

Supplying, fiting and fixing automatic flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)

ii) Hindware make

a) White

Auto Cister 10 litre (Cat. No.C61002)

DIVISION PLATE

Supplying fiting and fixing vitreous china division plate including fitting and fixing compete as directed and specified.

(A) Parryware Make

(a) White

(i) Partion Magnum / Large (Cat. No.C0571/07)

WASH BASIN

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)

PEDESTAL BASIN (with pedestal)

(A) Parryware Make

(a)White

(iv) Cascade NXT 550 x 440 with long Pedestal (Cat. No.C0404/C0380)

Counter Top Basin

(A) Parryware Make

(iii) Cascade NXT 550 x 445 (Cat. No.C0430) (coloured)

KITCHEN SINK (STAINLESS STEEL)

Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately

(ii) Single Bowl with Drain Board (400 x 200) Flat Edge - Glossy (Cat.No.C8537)

MIRROR

Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.

Providing fitting and fixing Decorative Mirror complete as directed and specified.

SHELF

Glass shelf with C.P. guard rail

(ii) Sona make (Cat. No.TR-0701)

SOAP TRAY,SOAP DISH,LIQUID SOAP DISPENSER AND LIQUID SOAP CONTAINER

Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified.

(a) Parryware Make

(ii) Wall Soap tray (Cat. No.C9951)

Providing, fitting and fixing Liquid soap dispenser and liquid soap container complete as directed and specified.

(iv) SONA make (Cat. No.AL-1011)

TOWEL RAIL,TOWEL RACK & TOWEL RING

Providing, fitting and fixing CP towel rail complete as directed and specified.

(b) Sona make

(i) Towel rail Diplomat 300mm long (Cat.No.TR-0605)

Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified.

(b) Sona make

(i) Towel ring round (Cat.No.TR-06051)

(ii) Towel ring round Aristo (Cat.No.TR-0652

TOILET PAPER HOLDER

Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified.

(a) Jaquar make

(i) Continental toilet paper holder (Cat.No. ACN-1151N)

WASTE COUPLING

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified

(b) Sona

(i) Rupa 32mm (HT/ FT) (Cat.No.WS-0801)

BOTTLE TRAP

Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified.

(b) Sona make

(i) Bottle trap indian 32mm (Cat. No.BT-0751)

Providing, fitting and fixing Chrome Plated bottle trap pipe complete as directed and specified.

(a) Sona make

(i) Pipe for bottle trap 300mm long (Cat. No.BT-0761)

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified.

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

(iv) 75mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.

(ii) 110mm dia.

(iv) 75mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

(iv) 75mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.

(ii) 110mm dia.

(iv) 75mm dia.

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

(iv) 75mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.

(ii) 110mm dia.

(iv) 75mm dia.

Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

(iv) 75mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.

(ii) 110mm dia.

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.

(ii) 110mm dia.

(iv) 75mm dia.

Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

(iv) 75mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.

(ii) 110mm dia.

(iv) 75mm dia.

Supplying fiting and fixing PVC single ‘Y’ of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

(iv) 75mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.

(ii) 110mm dia.

(iv) 75mm dia.

Supplying fiting and fixing PVC single ‘Y’ with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

(iv) 75mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.

(ii) 110mm dia.

(iv) 75mm dia.

Supplying fiting and fixing PVC double ‘Y’ plain of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.

a) In exposed surfaces or in trenches.

(iv) 75mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.

(ii) 110mm dia.

(iv) 75mm dia.

Supplying fiting and fixing PVC cross ‘T’ with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

(iv) 75mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.

(ii) 110mm dia.

(iv) 75mm dia.

Supplying fiting and fixing PVC coupler of (Supreme / Prince)or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.

a) In exposed surfaces or in trenches.

(ii) 110mm dia.

(iv) 75mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.

(ii) 110mm dia.

(iv) 75mm dia.

Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.

a) In exposed surfaces or in trenches.

(iii) 110 mm x 90 mm

(iv) 110 mm x 75mm

(viii) 75 mm x 63mm

Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. in exposed surface or trences as necessary complete at all levels including below G.L. as directed and specified.

(ii) 110mm dia.

(iv) 75mm dia.

COWEL

Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.

(iii) 90mm dia. PVC cowel of ISI make

GRATING

Providing fiting & fixing C.I. Grating to the floors complete as directed and specified.

(a) 110mm dia

SOAK PIT AND INSPECTION CHAMBER

Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.

Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.

INTERNAL WATER SUPPLY WORKS

PIPING

Providing and fixing 3 layer (Outer green / GREY coloured UV Stabilised, middle black coloured UV Stabilised and inermost layer white coloured with antimicrobial property) Fusion welded PP-R ( Poly propylene-random copolymer) Pipes, SDR 7.4 having thermal stability for hot and cold water supply conforming IS 15801-2008 including all plain PP-R fittings and brass threaded PP-R fitting and clamping, cutting and making good to the damages.

(A) Exposed or in trenches

SFMC/ FUSION brand or other brand of equivalent quality.

a) PN-16 Pipe,16mm OD,SDR-7.4

b) PN-16 Pipe,20 mm OD,SDR-7.4

c) PN-16 Pipe,25 mm OD,SDR-7.4

d) PN-16 Pipe,32 mm OD,SDR-7.4

e) PN-16 Pipe,40 mm OD,SDR-7.4

f) PN-16 Pipe,50 mm OD,SDR-7.4

(B) Concealed pipe with cutting chases & making good the walls

SFMC/ FUSION brand or other brand of equivalent quality.

a) PN-16 Pipe,16mm OD,SDR-7.4

b) PN-16 Pipe,20 mm OD,SDR-7.4

c) PN-16 Pipe,25 mm OD,SDR-7.4

d) PN-16 Pipe,32 mm OD,SDR-7.4

e) PN-16 Pipe,40 mm OD,SDR-7.4

f) PN-16 Pipe,50 mm OD,SDR-7.4

BIB COCK

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately)

Essco make (Delux/Sumthing spl./Tropical)

(a) Bib cock short body

STOP COCK

Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately

I) Brass stop cock (heavy) of Sant make

(i)15mm dia

(ii)20mm dia

(iii) 25mm dia

(iv)32mm dia

(v) 40mm dia

(v) 50mm dia

PUSH BIB COCK

Supplying fitting and fixing push bib cock 15mm dia complete as directed and specified as follows. (pipes will be measured and paid separately).

a) C.P.C.H.

(a) Light type

PILLAR COCK

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed.

SONA make

(a) Light type

Supplying fitting and fixing Telephonic Chrome Plated (C.P.) shower of approved brand as directed and specified. (Pipes will be measured and paid separately)

Essco make

(b) Telephone shower delux with 1.5m PVC tube and swinging hook

VALVE

Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.

a) 50mm dia

b) 40 mm dia.

c) 25 mm dia.

d) 2O mm dia.

e) 15 mm dia.

Supplying and fitting ball valve as specified and directed..

a) 25 mm dia. (gun metal)

b) 20mm dia. (gun metal/Copper)

Supplying fitting and fixing gun metal check valve including necessary threads to pipes.

a) 50 mm dia (Heavy type)

b) 40 mm dia (Heavy type)

Supplying fitting and fixing G.I. Foot valve with strainer including cutting necessary threads to pipes.

a) 50 mm dia (Heavy type)

b) 40 mm dia (Heavy type)

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes

2000 Lt capacity

(a) Sintex make

1500 litre capacity

(a) Sintex make

Internal Electrical Works

Wiring in surface/ recessed PVC conduit FR (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) cable

Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete

Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Medium point up to 6.00 metre. Length.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.

Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt./ Havells make), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)

Extra long point up to 15.00 metre. length.

Extra long point up to 20.00 metre. Length.

Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.

With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.

With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete

Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Supplying and fixing of Call bell ( Buzzer ) including 5/ 6 amp capacity button piano type bell push switch including connection as approved by the Deptt.)as required. [CB]

Fitting and fixing of brackets on the wall in GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover with all accessories such as GI/ MS switch board (ISI marked) with phenolic laminated sheet cover including connection as approved by the Deptt.)as required complete. [BK]

INDUSTRIAL SOCKETS, DB WITHOUT MCB & MCCB , MCB, RCCB, RCBO, SFU, CHANGE OVER ETC. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make)

Supplying fitting and fixing industrial Plug & Socket in surface mounting SPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of DP MCB complete with making necessary connection etc. as specified and directed by the Deptt.

20A Capacity. (ABB, Schneider MG, legrand, Hager make)

MCB DB (ABB, SCHNEIDER MG, LEGRAND, HAGER MAKE) & (SCHNEIDER NEO BREAK, C&S, Havells, INDOASIAN, HPL OR EQUIVALENT MAKE AS PPROVED BY THE DEPTT.)

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.

ABB, Schneider MG, legrand, Hager make)

8 way SPN double door

12 way SPN double door

MCCB IN-comer TPN (vertical DB)

Supplying with fitting and fixing MCCB income and MCB outgoing sheet steel, phosphatised, powder painted double door IP-43 surface mounting vertical TPN MCB DB incorporated with bas-bar up to 250A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.

ABB, Schneider MG, legrand, Hager make)

4 way TPN (4+12) double door

MCB, MCCB, RCCB, RCBO (ABB, SCHNEIDER MG, LEGRAND, AND HAGER MAKE) & (SCHNEIDER NEO BREAK, C&S, Havells, INDO ASIAN, HPL OR EQUIVALENT MAKE AS PPROVED BY THE DEPTT.) MCB (Conform to IS / IEC 60898-1:200/ MCCB (Conform to IS/IEC 60947- RCCB (Conform to IS/IEC 12640 / 61008)

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.

C Series (Schneider MG, legrand, Hager make)

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.

C Series (ABB, Schneider MG, legrand, Hager make)

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.

C Series (ABB, Schneider MG, legrand, Hager make)

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.

100/300mA sensitivity DP RCCB (ABB, Schneider MG, legrand, Hager make)

MCCB with Thermal & Magnetic Release

EARTHING

Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Extra for using salt (5 K and Charcoal (96 K in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .

Supplying & laying of 25X5mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of 25X5mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Supply, fitting & fixing 20 mmx5 mm G.I. strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode G.I. strips and Lightning Arrestor etc. as specified and directed by the deptt.

Supply, fitting & fixing of Lighting Finial Arrestor made of 25 mm dia 300 mm long solid Copper tube having 85 mm dia. single prong at top and 3 mm thick base plate at bottom complete with fitting & fixing with Brass nuts & bolts on roof, RCC slab, top of column etc. as specified and directed by the deptt.

LUMANARIES

Supplying, installation, testing and Commission of the following indoor CFL/Fluorescent luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection cable, as approved by the Deptt.)with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department.

Supply and Installation of 15W LED Surface mounted Ceiling Light Make Havells/Syska/Bajaj/Philips

Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection as approved by the Deptt.)with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department.

Supplying, installation, testing and Commission of the following indoor Decorative recessed typed mirror optics luminaries of T5 complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department

Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make)

Energy efficient 5-star 1200 mm sweep. ORIENT PSPO / Usha / CROMPTON / Havells/ ATC or equivalent make [ F ]

CEILING FAN, EXHAUST FAN AND AIR CURTAIN

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.

Domestic

Trans Air 300 mm sweep (Crompton make) [ EF ]

Supplying including fitting fixing of following A.C. Wall fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.

ORIENT make or equivalent Usha make

Air Circulator wall fan 450 mm sweep Turbo force

Supplying fitting and fixing of ceiling fan Regulator including connections etc. complete as required complete and as directed by the department.

Electronic StepType

GEYSER

Supplying and fitting fixing of electric storage water heater [Geyser] of VENUS/RAMSON/RACOLD/V Guard/ HAIER or equivalent make) including necessary connection etc. as required complete and as directed by the Department.

Vertical

25 Litre Capacity

U. G. CABLE AND CABLE WORKS

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured/Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make).

Core - 3.5 A2XFY

120 Sq.mm 3 and 1/2 core armoured cable

CABLE GLAND, TERMINAL, TRAY, FLOOR RACEWAY

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make).

Size of Tray

304 Metre

Transformer

Supplying, installation testing and commissioning of the following rating copper wound indoor / out door type transformer complete including the payment to be made to power supply authority for supervision charge, labour charge, cost of L.T/H.T metering etc. (excluding the cost of load security) and making necessary arrangement for charging approval of the sub-station from the competent authority as directed and specified by the department. Transformer should be as per CEA guidelines as ammended up to date upto 200 KVA star rating up to 5 star, above 200KVA as per CEA guidelines for losses along with LV enclosure. ( Including Load security )

160 KVA,.33/0.433 KV. Oil filled transformer with Off Circuit tap change.

NON-SCHEDULE ITEMS

MAIN LT PANElL

SITC of factory assembled cubicle type fully compartmentalised out door type 3 phase power control distribution pane(PCC)l suitable for operation at 415 volts, 50HZ AC supply complete with hinges on front opening door suitable for indoor installation conforming to IS 8623(Part I and II) having diamensions 1500 mm L X 1200 mm H X 400 mm Depth (excluding canopy) made with 2mm thick CRCA sheet with locking arrangement, totally enclosed, weather proof, dust proof, damp proof, vermin proof having slanting drip proof top complete powder coated to shade RAL 7032, connections, interconnections with suitable size double copper conductors, with name plate, danger notice board, removable gland plates made with 2 mm thick sheet steel mounted on M.S angle iron frame made with 50mm X50mm X 5mm thick angle iron having 4 nos 450 mm long legs ,and providing and fixing / integration of following accessories complete as required.

Incommer:

250 A 4P MCCB, 25 KA

100A 4P MCCB, 25 KA

63A TP MCCB, 25 KA

(iii) 63A 4 Pole 220VAC Contactor -01 nos Make Siemens/Schneider,L&T

(iv) 50-63A Thermal overload relay 01 nos Make: Siemens Schneider/L&T

100A 4P On-load changeover switch

Outgoing:

63 A FP RCCB

63 A TP RCCB

63A TP MCB

32A TP MCB

16-32A DP MCB

6A SP MCB

DIGITAL AMMETER

DIGITAL VOLTMETER

Analysis

Supplying, installation, testing and commissioning of the following prewired CFL/Flourescent luminaries complete with all accessories such as ballast, starter etc. directly on wall/ceilling including connection with 1.5 sq. mm PVC insulated single core copper conductor as reqd. and as directed by the Deptt.

Superior finish extruded aluminium body with anodised aluminium reflector and aluminium cross louver assembly. CFL Luminaires of make Bajaj Cat No. BSM 218 CFL ‘L’ type CFL 2 x 18W or equivalent inlcuding lamps etc. complete. [CLT]

AIR CONDITIONING WITH MRV ( VRF) SYSTEM

Supplying, installation, testing and commissioning of variable refigerant flow(VRF) air- conditioning system suitable for mass gathering both with higly efficient DC inverter driven scroll/rotary compressors complete with indoor and outdoor units with individual controllers and with fittings etc, as per requirement given below. The compressors have a intelligent soft start technology to achieve the set temperature quickly . The VRF units have wide operational range from -5 DEG C to 45 DEG C to ensure stable operation. The units are precharged with R-410A refrigerant gas, complete with duly powder coated etc as required. The outdoor unit heat exchangers have innovatively designed inner grooved type copper piping to enhance heat exchange and increase the subcooling of refrigerant to reduce system resistance and improve reliablility.The heat exchangers are specially designed for corrosion resistance with blue fin treatment. The units are Modbus Compatiable and have special night time silent operational feature. including remote control devices, and any other hard ware and stationary to complete the work in all respect. consisting of followings: 1. Ductable unit (For Auditorium)-Capacity: 8 TN : 7 nos 2. High wall unit - Capacity: 1 TN : 2 nos 3. High wall unit -Capacity: 1.5 TN : 2 nos 4. High wall unit -Capacity: 2 TN : 5 nos

ACOUSTICAL WORKS

1. Wall Treatment:-1: Supply and installation of Fabric Covered Heradesign fine wood wool panel ( Made in Austria ) of size 1200 x 600 x 25mm mounted on supplied G I Frame work consisting of basic profile, main profile & edge profile.The woodwool panel will be back lined with 50mm thick 1000GSM Polyester Wool. Tile Specification : Tile description : Magnesite bonded wood wool acoustic panel with fibre width of 1.5mm ; 1200 * 600 * 25mm thickness; Edge Detail : Square Edge ; Humidity Resistance : 90% ; Reaction to fire acc to EN 13501-1 B-s1,d0 ; NRC = 0.90 ;

2. Wall Treatment:-2: Supply and installation of FR grade 150mm wide 12mm thick Laminated plywood (150mm wide slat and 3mm gap between 150mm wide plywood) backed with 50mm thick 1000GSM polyester wool. Frame work consists of 25mm thick GI wall channels with fully knurled surface of 0.55mm thick 80mm width, having two equal flanges of 26mm. A GI wall channel is fixed to the walls in horizontal direction with the help of suitable fastners at 600mm C/C then an another 25mm thick GI wall channel is fixed vertically over the horizontlly laid wall channel at 600mm C/C . The frame work shall be back lined by using polyester wool having a density of 1000 GSM and 50mm thick. 150 mm wide 12 mm thick Vineered plywood is fixed on to frame work and 3mm gap is maintained between 150mm wide plywood and length as per the drawing of approved finish and then fixed to GI frame work by using suitable fasteners and ensure proper level of the panel surface.

3.Stage Side & Rear: Supply and installation of Heradesign Superfine coloured wood wool panel ( Made in Austria ) of size 1200 x 600 x 25mm mounted on supplied G I Frame work consisting of basic profile, main profile & edge profile.The woodwool panel will be back lined with 50 mm 24kg density glass wool. Tile Specification : Tile description : Magnesite bonded wood wool acoustic panel with fibre width of 1mm ; 1200 * 600 * 25mm thickness; Edge Detail : Square Edge ; Humidity Resistance : 90% ; Reaction to fire acc to EN 13501-1 B-s1,d0 ; NRC = 0.90 ; Thickness/Weight : 15 mm 7.8 Kg/m2;

4. Ceiling Area-1: Supply and installation of Heradesign Superfine coloured wood wool panel ( Made in Austria ) of size 1200 x 600 x 25mm mounted on supplied G I Frame work consisting of basic profile, main profile & edge profile.The woodwool panel will be back lined with 50 mm 24kg density glass wool. Tile Specification : Tile description : Magnesite bonded wood wool acoustic panel with fibre width of 1mm ; 1200 * 600 * 25mm thickness; Edge Detail : Square Edge ; Humidity Resistance : 90% ; Reaction to fire acc to EN 13501-1 B-s1,d0 ; NRC = 0.90 ; Thickness/Weight : 15 mm 7.8 Kg/m2;

4. Ceiling Area-2: Supply and Installation of GFR grade micro perforated (3 x 3mm square) gypsum plaster board of size 1200x 2400x 12.5mm thick back lined with acoustical fleece. Gypsum boards used shall have tapered edge along the length having base density of minimum 800Kgs/m3, and lined with paintable glass fabrics and 1000 gsm 50 mm polyester fiber infill. Including all channeling work and painting.

STAGE LIGHTING

Supply, installation, testing and commissioning of the following item of work, at all levels and locations, complete in all respects as per specifications requirement of the project and instruction of Engineer-in charge.

1. High quality CE Certified 54x3W LED PAR Light used as a Effect Light, Spot Light and Strobe Light etc. with below specifications: • Lamp: 54 X 3W RGBW LED (12R+18G+18B+6W) • Max. Power consumpsion: 160W • Power supply: 100-230V AC, 50/60Hz • Power cable: 3 core 1.5 sq. mm. copper PVC insulated • Channels: 8 Channel DMX-512 • Beam angle: 25° • LUX @ 2m: 11,000 • Control mode: DMX,Manual and Master Slave • Dimming: 0 - 100% • Function: strobe, dimming, sound active and Master slave. • Housing: Diecast aluminium with black epoxy polyster powder coated • Power and DMX: Loop in and loop out • Dimension: W 220 x L 240 x H 335mm • Weight: 2.9 Kg • Certification: CE (Make: Canara lighting/ Daylight / Chauvet)

2. High quality CE Certified200W LED Profile Spot Light used as a Spot Light and high-contrast gobo projection Light. Other Technical specifications as below: • Lamp Power : 200W COB LED • Power Supply : AC 110-230V, 50Hz. • CRI : >90 • Colour Temperature : 3200K • Focus : Manual Focus • Beam Angle : 19° • Control : DMX, Autorun and Master/Slave • Shutter arrangements : Beam shapping shutter or plastic gobo projection assembly. • Lux Level - 20,375 lux @ 2 Mtr with beam angle 19°,3200K • Dimming : 0 - 100% dimming • Protection Rating : IP20 • Body Color : Black • Weight : 7.50Kg • Dimentions : W 300 x L 700 x H 310 mm. (Make: Canara lighting / Daylight / Spotlight)

3. 1000W spun aluminum PARCAN made out of spun aluminum 16 SWG in 2 piece cylindrical construction with punched slot on Par can housing for natural ventilation and floating ceramic GX16d base lamp socket,Yoke made of MS flat 25 X 3mm with 13mm free mounting hole to fit the adapter, spigot with 28mm and filter frame but without lamp. "Lamp: 1000W 240V PAR-64,Lamp Socket: Ceramic type GX 16D,Housing: Aluminum sheet cylindrical construction with black epoxy polyester "Switching options: Local control and Digital DMX control through Dimmer,Dimming option: Digital DMX control through Dimmer,Yoke: Fabricated using MS flat-accepts mounting on 28mm spud Focus: Sealed beam angle,Accessories: Filter frame. (Make: Canara lighting / Daylight / Spotlight)

4. High Quality CE Certified 20x15W RGBWA 5 in 1 LED Wash Light fixture with below specification details. • Light Source : 20 x 15W RGBWA 5 in 1 LEDs • Operating Voltage : 100-240VAC, 50-60 Hz • Power: 300W Max • IP Rated IP20 /IP 65 • Beam angle : 45°/30° • DMX Channels : 5/9 • Operating Modes : DMX512 / Manual / Color Preset • Dimmer : 0-100% linear adjustment • Operating Modes DMX, Master/Slave, Color Preset • Housing Cast aluminum housing with natural cooling system • Power cable & DMX cable In-out looping cables • Dimension: 360 x 210 x 350 mm • Net Weight: 7.4 kgs (Make: Canara lighting / Daylight / Chauvet)

5. High quality CE Certified 200W LED Fresnel light used as a Key light, Back light, Fill light with dimming, spot & flood focus versions for creating various effects for multiple applications with specifications as below. • Lamp power - 200W COB LED • Power supply - 100-240 AC, 50/60 Hz • Power cable - 3 core 1 sq. mm. copper PVC insulated • Color Temperature: 3200K • Control : DMX512, Manual and RDM Technology • Spot - Flood focus adjustment : Manual • CRI > 95 • TLCI>95 • Dimming - 0-100% through manual, DMX & RDM • Beam Angle - 10°-50° • Protection rating - IP20 • LUX at 2m: 38,270 at 10° & 3,557 at 50° (3200K) • Dimension - W 250 x L 370 x H 295 mm • Weight – 8.5 Kg • Certification: CE (Make: Canara lighting / Daylight / Arri)

6. 8-leaf barndoor for 200W LED FRESNEL light, undergone through 7 Tank chemical treatement to keep them rust free and, duly powder coated in black matt texture finish. (Make: Canara lighting /Daylight / Arri)

7. Diecast aluminum "C" clamp with safety locking chain, duly powder coated in black matt texture finish and technical specifications as below. • Lock - MS threaded Galvanized lock key, Plastic Glass filled nylon moulded M6 key. • Receptacle - 28mm standard TV spigot. • Safety - MS Galvanized chain with pin. • Finish - Pretreated and black epoxy polyester powder coated. • Self weight - 0.54Kg • Safe working load – 150Kg. (Make: Canara lighting /Daylight / Arri)

8. Safety bond with lock clip to be fixed around the grid to avoid fall of the material in case if the "C" clamp is not locked properly . SWL 100Kgs. (Make: Canara lighting /Daylight / Arri)

9. Identification name plate round 79MM undergone through 7 Tank chemical treatement to keep them rust free and duly powder coated in matt White texture finish. (Make: Canara lighting /Daylight / Arri)

10. MS suspender consisting of fish plate of 150X150X6mm undergone through 7Tank chemical treatement to keep them rust free and with requisite anchor fastner duly powder coated in black matt texture finish & stud with 12mm threaded rod to keep the Bar rigidly held With SWL of 200kg. (Make: Canara lighting /Daylight / Thomas)

11. MS Pipe Class B dual barrel 40NB powder coated with Matt black finish, 2.2 mm wall thickness Pipe should have under gone 7 tanks chemical treatment process and rusto cleaned. (Make: Canara lighting /Daylight / Thomas)

12. Motorized Light bar, Made using 40NB dual construction. Dual barrel duly powder coated with matt black texture finish paint to keep them rust free.Powder coated 60 microns black matt finish with proper chemical treatment and methodogy. Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum. Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller, With cable management system & cable trays. Safe working load of 200Kg. (Make: Canara lighting /Daylight / Thomas)

13. Fixed FOH light bar, length 8 Mtrs made using 40NB dual barrel with perforated Cable tray undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish and provided with suitable suspender and clamps. (Make: Canara lighting /Daylight / Thomas)

14. Side Lighting lader, made using 40NB pipe undergone through 7 Tank chemical treatement to keep them rust free and duly powder coated in black matt texture finish Size of 1.2 Mtr x 0.6 Mtr and provided with suitable suspender and mounting clamps. (Make: Canara lighting /Daylight / Thomas)

15. Main Scallop fixing arrangement using 40NB Pipe 2mm thick, 8 Mtr in length MS pipe, undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with matt black texture finish with mounting brackets to suspend the arrangement. (Make: Canara lighting / Daylight / Waagner Biro)

16. MS Power junction box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 4 way 10A IEC Socket of below specifications:- • Fixing : Snap fit /15 (1.5mm) • Total Max Rating : 10A, 250V a.c • Operating Temp : –20˚C to +70˚C • Mouldings : Nylon, Flammability Rating UL94V-0 (Make: Canara Lighting/Daylight / ABB)

17. MS Signal junction box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 5 pin XLR DMX out connector. (Make: Canara Lighting / Daylight / Schindler)

28. DMX lighting junction loop box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 5 pin XLR DMX in / out connector. (Canara Lighting / Daylight / Schindler)

29. MS Auxilary fabricated marshalling boxes made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish for all the light bar with required no of grey connectors. (Make: Canara Lighting / Daylight / Havels)

20. 15 Way Direct Lighting Distribution Board made up of MS CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish consists of suitable rating TPN incomer, SP Mcb's and for the junction boxes fixed on the top of the grid including wiring and busbar connection with proper earthing and Hingable door with magnetic door lock complete. (Make: Canara Lighting / Daylight / Havels)

21. MS Fabricated made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish power junction box (PJB) to terminate the Motorized section power connections. (Make: Canara Lighting / Daylight / L&T)

22. MS sheet metal fabricated power junction box duly powder coated and fitted with 2 10amps 3 pin IEC socket,ON/OFF switch and necessary glands to power splitters and console undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with Matt black texture finish for dimmable points along with the FC7 glands. (Make: Canara Lighting / Daylight / ABB)

23. Installation hardwares such as clamps, connectors, glands, lugs, ferruels, welding rods etc. (Make: Canara Lighting / Daylight/ Customized)

24. MS perforated trays with tray lid of size 40 mm X 75 mm X 40 mm, treated with 7 tank process with various chemical treatment to keep them rust free, duly powder coated with matt black texture finish paint along with clamping arrangement. (Make: Canara Lighting / Daylight /Ricco)

25. Grid mount photo isolator DMX Amplifier unit 1 DMX input and 8 isolated output with following specifications: • Power Supply: 90-240V AC, 45-63Hz. • Control: DMX 512 protocol, • Control Signal input: 5 pin XLR female, • Size: 482 x 44 x 128mm , • Weight: 2Kg.with splitter bracket. (Make:Daylight /Liteputer / Canara Lighting)

26. Digital Lighting Console with 1024 DMX channels • 1024 Channels. • 96 Fixtures. • 96 Dimmer Control Channels. • Time control of scenes: Fade in/out, LTP slope • Channels for each fixture 40 primary + 40 fine tune • LCD display with back light • 60 Scenes/Playbacks • 600 Scene step • 10 Scenes to run simultaneoulsy • Shape generato: Shapes of Dimmer, Pan/Tilt, RGB, CMY, Color, Gobo, Iris and Focus • Master slider - Global, playback, fixture • USB Memory - FAT32 supported (Make: Avolites / Daylight / Canara Lighting)

27. 5 pin XLR male / female connectors. (Make: Neutrik / CL / Amphenol)

28. 5 Pin XLR Termination plug. (Make: Neutrik / CL / Amphenol)

29. Valcro Tape (White if available) (Make: Customized / / Daylight)

30. PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 3cx1.5 sq mm. (Make: Walna / SBEE / Polycab /KEI.)

31. FRLS PVC copper multistrand flexible cable 7 core x1.5 sq.mm. (Make: Walna / SBEE / Polycab /KEI.)

32. PVC Copper armoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 4cx2.5 sq mm. (Make: Walna / SBEE / Polycab /KEI.)

33. DMX signal cable for DMX network. (Make: Falcon / Canara / Polycab / KEI.)

STAGE DRAPERY SYSTEM

Supply, installation, testing and commissioning of the following item of work, at all levels and locations, complete in all respects as per specifications requirement of the project and instruction of Engineer-in charge.

1. Main Austrian Curtain Mechanism Size- 3 Mtr Height X 8 Mtr Length as per the drawing includes - • Pedastal drive arrangement with 3 phase induction motor • Worm Gearbox • Panel board, push button- up down stop • Limit switch Double Cam operated • Pile Winding drum • GI wire steel rope- 4mm • Guide pulley, drop and diverter pulley sets • Hardwares • Counter weight • And necessary Pipe and C track arrangement (Make: Canara lighting / Daylight / Waagner Biro)

2. Rear curtain track system 7 Mtr long, centre parting with overlap of 0.9mtr provided with, Heavy duty extruded aluminium I track of 48x84mm, powder coated Track mounting brackets constructed of C track of dimension 40X50X40mm Electromechanical drive unit with 3PH INDUCTION MOTOR, 1.1KW, 3000RPM, 90B5 FLANGE MOUNT with GI wire ropes of 3mm in diameter constructed with 7 bundles of 7 strands with steel core at center Curtain holding Nylon wheel trollies consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm throughout the track.Nylon moulded 6201 Ball bearing Diverter pulley with with 90mm for outer diameter, 72mm diameter at groove base, 19mm pulley thickness & MS yellow passivated Routing pulleys with 165mm for outer diameter, 150mm diameter at groove base with 12mm pulley thickness. (Canara lighting / Daylight / Waagner Biro)

3. Cyclorma arrangement using aluminium extruded ''I'' track of 48 x 84mm duly powder coated in black texture finish to use as straight cyclorama track with MS fabricated Grid/wall mount bracket constructed of C track of dimension 40X50X40mm duly powder coated to hold the track, MS fabricated Tie down railing cut length 3 mtr duly powder coated to keep the cyclorama in drum tight arrangement, 2 wheeler trolley placed uniformly at specific interval of 200mm throughout the track, MS powder coated Leading edge frame to keep the cyclorama in drum tight arrangement of Size 4 Mtr x 2.5 Mtr. (Make: Canara lighting / Daylight / Waagner Biro)

4. MS, Wing frame construction, made out of MS square pipe with 2mm in thickness powder coated of size H 3 Mtr x W 1 Mtr, provided with 1.5meter wing track of 48X84mm with gridmount brackets made of 40X50X40mm C track Pivotable 4wheeled suspension trolley Adjustable floor locking screw jacks with rubber grips Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp Extruded track Aluminium I Profile to be laid through out the dept of the stage. (Make: Canara lighting / Daylight / Waagner Biro)

5. Well designed and engineered Wall mount 2 feeder motor control centre panel & Remote control panel with emergency trip, necessary contactors and relays, push button stations and contact elements to control the motors system for curtains. (MCCP/RCP - 2). (Make: Canara Lighting / Daylight / L&T)

6. Internal earthing copper bare conductor network related to work coming under our scope. (Make: Canara Lighting / Daylight / Customized)

7. Fire retardant velvette fabric 300% (4 times of the finished dimension) gathering for main Scallop as per the approved patern and colour, not less than 300 GSM, duly stitched along with and eyelets. (Make: Canara / Omphile / Daylight.)

8. Fire retardant velvette fabric with lining 300% (4 times of the finished dimension) gathering for main curtain as per the approved patern and colour, not less than 300 GSM, duly stitched along with eyelets. (Make: Canara / Omphile / Daylight.)

9. Fire retardant cotton fabric 50% (1.5 times of the finished dimension) gathering for Rear curtain as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets. (Make: Canara / Omphile / Daylight.)

10. Fire retardant cotton fabric 50% (1.5 times of the finished dimension) gathering for Frill as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets. (Make: Canara / Omphile / Daylight.)

11. Fire retardant cotton fabric 0% gathering for wings as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets. (Make: Canara / Omphile / Daylight.)

12. Perforated plastic Cyclorama seamless welded screen, off white, with eyelets along all four sides, perforated plastic screen with eyelets. (Make: Canara / Showtex / Daylight.)

AUDITORIUM CHAIR

Supply, installation, testing and commissioning of the following item of work, at all levels and locations, complete in all respects as per specifications requirement of the project and instruction of Engineer-in charge. Auditorium Chair: Size of Chair: Centre to centre : 21" minimum to 23" maximum Seat and Back: Inner frames (total weight 5 kg) 50 x 25 mm tube 16g with 3 serpentine springs 25 mm x 5 mm thick MS steel frame with 3 zig zag springs, weight: 3 kg or PPCP plastic molded seat frame 1.50 Kg Seat and back polyurethane molded foam cushion (total weight 2.25 kg) Both seat and back cushioned with 50 density non-sagging molded polyurethane foam Fabric for seat, back and side stands: Seat, back and Side Stand covered/ upholstered with “Vimal Harmony” brand fire retardant grade fabric made by M/s Reliance Industries Limited. Fabric Lamination: Seat, back top and side stand fabric further laminated with 6 mm thick U-foam with polyester lining underneath for quilting and extra strength. Push Back System : (8 kg): Synchronized push back system with seam less / welding less 14g seat supporting tray. 2 nos. of 12G back clamps. 2 nos. of 14G roller holders with 2 nos. 30 mm rollers 2 nos. of 50 x 25 mm MS tubes of 16G tubes 4 nos. of 25 mm x 6 mm MS flat arms Side Stand, 4.50 kg: 16G CRC sheet 2 nos. in box type construction. Heavy gauge one piece footrest Covered with duly laminated upholstery fabric as used in seat and back. Armrest: Integrated skin type polyurethane foam made arm rest without cup holder. Accessories: Aisle light boxes and seat numbers made with reflective tape. Contd.Paint: All steel work epoxy powder coated painted in 55 microns. Back Cover : PPCP moulded back cover (weight 1.5 kg) Installation: Installation with anchor fasteners of 16 mm dia 65 mm long x 4 nos. each side stands. Supply and installation at all levels of Auditorium Seats (Make: Penworker/ Theater Solution or other approved equivalent)

DIMMABLE LIGHTING SYSTEM WITH DALI/ DSI SYSTEM

Supply, installation, testing and commissioning of the following item of work, at all levels and locations, complete in all respects as per specifications requirement of the project and instruction of Engineer-in charge.

1. SITC of Diffused /6500K; Article No.: Luminous flux (Luminaire): 2221 lm; Luminous flux (Lamps): 2220 lm; Luminaire Wattage: 22.0 W; Luminaire classification according to CIE: 100; CIE flux code: 52 83 97 100 100; Fitting: 1 x LED/6500K (Correction Factor 1.000). (Make: Dynalite/ Legrand/ Cyska)

2. SITC of Mirrored /4000K; Article No.: Luminous flux (Luminaire): 3963 lm; Luminous flux (Lamps): 3980 lm; Luminaire Wattage: 46.7 W; Luminaire classification according to CIE: 100; CIE flux code: 98 99 100 100 100; Fitting: 1 x LED40/4000K (Correction Factor 1.000). (Make: Dynalite/ Legrand/ Cyska)

5. SITC of QS device: International seeTouch QS 10-button with raise/lower wallstation. Two contact closure inputs via a connector onthe back of the wallstation. Unit dimensions with faceplate: (87 mm x 87 mm). Mounts in European and UK wallboxes. Similar to Lutron make QSWE-10BRLN-AW or equivalent at Council's Chamber. (Make: Dynalite/ Legrand/ Cyska)

6. SITC of Electrical Cables, PVC Conduits etc (Make: Polycab/ Finolex)

MS Luhit Enterprise