MAINTENANCE REPAIR AND RENEWAL OF INTERNAL ELECTRIC WIRING INCLUDING ATTENDING COMPLAINTS OF OTM AND MD ACCN OF UNITS UNDER GE MH AND RH KIRKEE

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking into credit (credit for above items shall be made as per condition laid down under schedule of credit seprately) and making good disturbed surfaces of walls, floors etc all as specified.

M&L for point wiring using approved colour coding as per IS ( Red, black and green for single phase circuits), with multi stranded copper conductor 1.5 Sqmm nominal cross sectional area,single core, PVC insulated and unsheathed FRLS cable1100 volts grade , ISI-694 (1990) marked with valid CML No in and including PVC casing & capping of suitable size on walls/roof/floor etc, ISI marked with suitable accessories, mild steel/ pressed steel sunken box of 1.2 mm thick and 60 mm deep ( with earth dolly ) duly painted with two coat of anti corrosive paint / aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide externally, covered with 3 mm thick plasticlaminated sheet cover for fixing of switches, sockets and fan regulator etc, including PVC insulated multistranded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by engr in charge for the following Make : Polycab /Finolex/ Havells.

One fan/light /bell point controlled by one switch/bell push

One switch socket outlet 5 Amps on independent board

One socket outlet 5 Amps on the same board

All as per Item No 2 here-in-before but with 2.5 Sqmm PVC insulated multistranded copper conductor cable unsheathed FRLS 1100Volts grade and 2.5 sqmm PVC insulated multistranded copper conductor unsheathed as earth continuity conductor for one switch socket outlet 15 Amps on independent board complete all as specified and directed by Engr-in-Charge.

All as per Item No 2 here-in-before but with 4.0 Sqmm PVC insulated multistranded copper conductor cable unsheathed FRLS 1100Volts grade and 4.0 sqmm PVC insulated multistranded copper conductor unsheathed as earth continuity conductor for power socket on independent board complete all as specified and directed by Engr- in - Charge.

M&L for point wiring using approved colour coding as per IS ( Red, black and green for single phase circuits), with multi stranded copper conductor 1.5 Sqmm nominal cross sectional area,single core, PVC insulated and unsheathed FRLS cable1100 volts grade , ISI-694 (1990) marked with valid CML No in and including medium grade,PVC Conduit of suitable size on walls/roof/floor etc, ISI marked with suitable accessories , mild steel/ pressed steel sunken box of 1.2 mm thick and 60 mm deep ( with earth dolly ) duly painted with two coat of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide externally , covered with 3 mm thick plasticlaminated sheet cover for fixing of switches, sockets and fan regulator etc, including PVC insulated multistranded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by engr in charge for the following Make : Polycab /Finolex/ Havells.

One fan/light /bell point controlled by one switch/bell push

One switch socket outlet 5 Amps on independent board

One socket outlet 5 Amps on the same board

All as per Item No 5 here-in-before but with 2.5 Sqmm PVC insulated multistranded copper conductor cable including 2.5 sqmm PVC insulated but unsheathed copper conductor FRLS cable 1100Volts grade and 2.5 Sqmm as earth continuity conductor for one switch socket outlet 15 Amps on independent board through medium PVC conduit complete all as specified and directed by Engr- in - Charge.

All as per Item No 5 here-in-before but with 4 Sqmm PVC insulated multistranded copper conductor cable including 4 sqmm PVC insulated but unsheathed copper conductor FRLS cable 1100Volts grade and 4 Sqmm as earth continuity conductor for power socket on independent board through medium PVC conduit complete all as specified and directed by Engr- in - Charge.

M&L for sub main wiring using two single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into PVC Casing capping of suitable size including 4 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface including taking down old unserviceable/burnt wiring of any type or size all as directed by Engr-in-Charge. Note : Two runs of 4 Sqmm PVC cable and one run of 4 Sqmm earth cable & one run of PVC Casing capping shall be measured as one unit length.

M&L for sub main wiring using two single core multistranded PVC insulated copper conductor FRLS Cable of size 6 sqmm 1100 volt grade drawn into PVC Casing capping of suitable size including 6 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface including taking down old unserviceable/burnt wiring of any type or size all as directed by Engr-in-Charge. Note : Two runs of 6 Sqmm PVC cable and one run of 6 Sqmm earth cable & one run of PVC Casing capping shall be measured as one unit length.

Supply and fix in repair ceiling rose surface bakelite with three terminals type in all as specified and directed.

Supply and fix in repairs switch piano type one way 6 Amps flush type, 240volt AC all as specified and directed.

Supply and fix in repairs socket outlet 2 in1,3 pin 5 Amps all as specified and directed.

Supply and fix in repairs switch socket combination(SSC) 2 in 1, 3 pin, 5 Amps flush type ,240volt AC all as specified and directed.

Supply and fix in repairs switch piano type 16 Amps flush type ,240volt AC all as specified and directed.

Supply and fix in repairs socket outlet 2 in 1, 3/ 5 pin 16 Amps flush type all as specified and directed.

Supply and fix in repairs switch socket combination(SSC) 2 in 1, 3/5 pin, 16 Amps flush type ,240volt AC all as specified and directed.

Supply and fix in repairs Bell push, flush type, 6 Amp flush type ,240volt AC all as specified and directed.

Supply and fix in repairs switch piano type two way 6 Amps flush type ,240volt AC all as specified and directed.

Supply and fix in repairs Bell push, Modular type, 6 Amp flush type ,240volt AC all as specified and directed.

Supply and fix in repair modular switch 1 way 6A 1 module complete all as specified and directed.

Supply and fix in repair modular switch 2 way 6A 1 module complete all as specified and directed.

Supply and fix in repair modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in repair modular socket 6A /16A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in repair modular fan regulator,120 watt - 2 module complete all as specified and directed.

S & Fix in repair stepped type electronic fan regulator 120 watt ,240 volt flush type on the existing phenolic laminated sheet

Supply and fix in repair electric bell Ding Dong, AC 230 volts complete all as specified and directed.

Supply and fix in repair Modular white cover plate with frame of following size complete all as specified and directed.

1 module

2 module

3 module

4 module

6 module

8 module

Supply and fixing replacement of RCCB 63 A , four pole, 30 mA all as specified and directed by Engr-in-charge. Make: Hager/L & T/Standard

Supply and fix in industrial wall mounted plug socket suitable fotr IP 44 degree of protection of 32Amps rating 3p+N +E all as specified and directed. Make: L&T cat part DBPPS563SD or other equivalent make all as specified and directed

S & F sheet metal enclosures for double door distribution board factory made duly painted of following capacity with 200 amps rated bus bar , suitable for fixing MCB /Isolators all as specified Make : L & T/legrand/Havells or equivalent make given under list of makes.

12 way SPN , 240V

8 way SPN 240V

8 way TPN ,415V

S & F MCCB 125 Amps, 4 pole, Breaking capacity 16 KA, 415 V adjustable type all as specified of capacity Make: L &T /Legrand/standard/ BENLO

Supply and fixing miniature circuit breaker (MCB) of following current carrying capacity, in the MCB DB Complete with connection testing and commissioning. Make L &T /Legrand/Havells// BENLO

SP 5 to 32 Amp,240V, 10 KA 'B' curve

SP 40 AMP,240V, 10 KA 'B' curve

SPN 32 Amps,240V, 10 KA 'B' curve

SPN 40 Amps ,240V, 10 KA 'B' curve

TPN 63Amps,240V, 10 KA 'B' curve

Labour only for attending MES complaints received through Mobile App/complaint slip with 01 High skilled electrician and 01 Helper for one shifts from 0830 Hrs to 1730 hrs on all working days at New Mandaly line Officer Qtr, Old Mandaly line Officer Qtr, Old Mandaly line MES Qtr, QMTI OR /JCO Md Accn, 204 PL ASC Supply, AGE E/M (W) Kirkee office, BSO yard, P-20 Burr road VIP bundalow, Range hills Bungalow, Ashok Nagar & BDTC Md Accn, New MAP offr Md accn opposite to Stn workshop EME Kirkee, Stn workshop EME Kirkee, MES Qtr at Goal Market, Siprox Qtr, Aaya Qtr. Note: - (i) The complaints will be entered in complaint slip by JE E/M MCM. (ii) The complaint slip should be returned to JE E/M on completion of the work with stores consumed. (iii) Any delay in attending the complaints for more than 03 days, a penalty of Rs 50/- per complaint will be adhered to the contractor. (iv) The details of stores consumed, complaint slip are to be produced during the RAR bills. (v) T & P, Minor spares like nuts, bolts, screws, washers required for attending the complaints shall be provided by the contractor. (vi) Job card register and complaint register should provided by contractor to note down the mes complaint

Supply & fix in repairs aluminium strip 25 mm x 3 mm complete with saddles and fixing screws for fitting the strip all as specified and directed.

Supply & fix in repairs galvanised iron strip 32 mm x 6 mm complete with saddles and fixing screws for fitting the strip all as specified and directed.

M&L for Air terminations single pointed Aluminium rod 12 mm dia and 300 mm long with necessary fixing arrangements on roof including taking down old all as directed.

M&L for Air terminations single pointed copper rod 12 mm dia and 300 mm long with necessary fixing arrangements on roof all as directed.

Supply and fix test point terminal block made out of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex. head screw including taking down old all as spcified and directed by Engr- in - Charge.

M &L for repair, replacement of damaged, rusted cast iron/pressed steel terminal boxes on inside wall S & F Cast iron/pressed steel terminal boxes of following size and cutting sheet for mounting removed existing and new switches, sockets, fan regulator, etc with 3 mm thick plastic laminated sheet cover making surface good with cement plaster or POP all as specified and directed by Engr-in-charge.

75 mm x 75 mm, 60 mm deep

100mmx100mm, 60 mm deep

150 mm x 75 mm, 60 mm deep

M & L for Hot water water supply pipe duly insulated with glass wool and aluminium cladding 15 mm bore all specified and directed by Engr in charge.

S & F in repairs wall mounted extruded aluminium housing high quality indoor batten of following capacity colour temperature 6500 K lumen 2000 -3000, PF> 0.95, THD less 15% diffused connecting with three core flexible copper wire from connecto to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make : Havells/wipro/Halonix or equivalent make given under list of makes.

LED tubelight fitting of 20 watt, 4 Ft long

LED tubelight fitting of 10 watt, 2 Ft long

S & F in repairs recess mounting LED flat panel light fitting of following wattage and size with efficient LEDs lumen 2000 -3000, PF> 0.95, THD less 15% including taking down unserviceable fitting of any type and make all as specified and directed. Make : Havells/wipro/Halonix or equivalent make given under list of makes.

36 watt of 600mm x 600 mm size

20 watt of 300 x 300mm size

Circular in size 18/20 watt not less then 150mm dia

S & F in repairs wall mounted high quality indoor wall bracket light cylinderical/oval shape aesthetically designed fitting with B22d lamp holder and 12 Watt bulb temp range 4000k to 6500 K as per site requirement connecting with three core flexible copper wire as directed by Engr-in-charge. Make : Halonix cat No: HLWB-01-B22 or evivalennt Havells/wipro

M & L for repair and replace of unserviceable LED driver suitable for 36/40 watt LED panel light fitting 600 x 600 mm size on site all as specified and directed by Engr-in-Charge.

S&F fix high efficent LED building security light 30 watt , 230 V , lumen 2000 -3000, PF> 0.95, THD less 10%, made of pressutre cast aluminuim housing with high power LEDs, lens and toughned glass IP 66 connecting with three core flexible copper wire from connecto to ceiling rose Make : Halonix, Bajaj, Havells or equivalent make given under list of makes.

S & F in repair bracket for mounting building security light made out of 32/ 40 mm dia medium Grade GI pipe bend in angle with holding MS clamps two nos each bracket ox size 25x3 mm including screw etc for fixing all as specidfied and directed by Engr in charge

S & F in repairs high efficient suspended type 150 watt,230v, lumen 2000 -3000, PF> 0.9, THD less 10% LED bay light of die cast aluminium housing with lens embedded PC cover IP 66 with effficany not less then 120 lm/W, as per IS -10322 , high voltage cut off,open and short circuit protection including constant voltage and current LED driver all as directed. Note: (i) Making arrangement for T & P to fixing of bay light is incluidng quoted rate. Make : Havells/wipro/Halonix or evivalennt make given under list of makes.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 40 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete. Note : Rate of item is deemed to be included for excavation in hard rock, by compressor machine to achieve required depth.

Taking down carefully electric water heater (geyser) of storage capacity 25/35/50 ltrs of any make comprising of the following works mentioned here under:- (a) Replacement of worned out spares shall be measured and paid seprately as supply only (b) Inspection, taking down, opening ( dismantling ) descaling, brushing, cleaning of storage tank (c) Examine water tightness of storage tank after cleaning. (d) Carry out operation of all stop cocks, pressure reducing valves etc. to ensures free movement of the working parts. (e) Replacement of the rubber / PVC gasket to ensure water tightness. (f) Checking of safety valve (g) Testing of geysers after repairs.

Supply only thermal cutout ISI marked temp range 50-80/90 degree as required at site for geyser of capacity 25/35/50 Ltr of any make all as directed by Engr-in-charge

Supply only safety valve/high pressure valve ISI marked as per site requirement or all as per directed by Engineer-in-Charge.

Supply only heating element 1/1.5 KW,240 volt including rubber washers all as specified and directed by Engr-in-charge.

Supply only heating element 2 KW, 240 volt including rubber washers all as specified and directed by Engr-in-charge.

S & F in repairs of PVC pipe with brass hexagonal adopters both side, suitable for 15 mm dia pipe 60 cm long for cold water connection all as specified and directed by Engr-in-Charge

S & Fixing in repairs metal braided PVC/CP pipe with brass hexagonal adopters both side, suitable for 15 mm dia pipe 45 cm long for hot water connection all as specified and directed by Engineer-in-charge.

S & Fixing in repairs, non return valve 15 mm dia of brass, ISI marked all as specified and directed by Engineer-in-charge.

S & F stop valve, cast copper alloy screw down high pressure crutch handle, screwed both end for iron pipe suitable for 15 mm bore all as specified and directed by Engr-in-Charge

Taking down unserviceable ceiling/ exhust fans/ aircirculator of any make and type servicing, over hauling, oiling greasing the requisit parts and rectifying the defects including replacement of unserviceable parts and testing and reinstalling at same or any other location as directed at site by Engineer-in-charge. Notes: - (i). The unit rate is deemed to include the cost of taking down carefully fans from existing position after disconnecting electric connections, sealing cable ends, bringing to MES store yard and refixing in same as different locations after repair etc complete all as directed by Engineer-in-charge. (ii) Cost of major items such as winding, ball bearing, gun metal bush, capacitors, canopy, blades and repair/ rewinding /painting etc shall be measured and paid separately under relevant item of this schedule as supply only. (iii) Minor items or works like tightening loose connections in switch, binding insulation tape to the naked wires, replacement of unserviceable clamps, nuts and bolts, split pins, rubber reel,greasing, washers, including flexible twin core copper wire of suitable size from existing ceiling rose to fan etc complete shall be provided without any extra cost and cost of these minor items or works shall be deemed to be included in the unit rate quoted rates against this item and nothing extra shall be paid on this account.

Supply only ball bearing (DE/NDE) to match the existing make suitable for 1200/1400 mm sweep ceiling fan including greasing complete all as specified and directed by Engr-in-Charge. Make: SKF/NBC

Supply only ball bearing suitable for 275-450 mm exhaust fan complete all as specified and directed Make : SKF/NBC or equivalent make given under list of makes.

Supply only fan capacitor 2.5 mfd

Supply only fan capacitor 4 mfd

Supply only , rubber yoke, MS Clamps, bolts nuts with split pin suitable for ceiling fan 1200 /1400 mm sweep complete all as specified and as directed by Engr-in-charge.

Supply only gunmetal bush suitable size for ceiling fan 1200 /1400 mm sweep complete all as specifed and directed by Engr-in-Charge.

supply only fan down rod 300mm long with white enammbeled painted with both side hole for hanging fan of sweep 1200/1400mm sweep all as specifeied and directed by Engr in charge

supply only fan down rod 600mm long with white enammbeled painted with both side hole for hanging fan of sweep 1200/1400mm sweep all as specifeied and directed by Engr in charge

Supply only fan canopy set off white /white coloured as per colour of ceiling fan of sweep1200/1400mm all as specified and directed.

M & L for rewinding of ceiling fan/ exhaust fan/ air circulator of any make by split opening the fan carrying cutting the burnt winding and cleaning the slots and rewinding with super enamelled copper winding wire appropriate gauge including connection,capacitor base and testing complete all as specified and directed by Engr-in-Charge. Note: (a) Bearing ,fan canopy, capacitor, down rod etc will be measured and paid separately under relevant item of schedule.

Ceiling fan of 1200/1400 mm sweep

Exhaust Fan of sweep 275-300 mm

Exhaust Fan of sweep 350-450 mm

Air circulator of sweep 350-600 mm

Fixing only in repair aluminium strip 25 mm x 3mm complete with saddles and screws for fitting the strip.

M & L for repairing, replacment of unserviceable copper container of following capacities of solar water heater of any type after completion of work testing the heater all as specified and directed by Engr-in-Charge

Copper container 50/100 ltr solar

Copper container capacity 25 Ltrs of water heater (geyser)

Supply and replace hylum / PVC sheet 3 mm thick for Junction boxes, circuit boxes for various size and refixing the existing switches, sockets, regulators cut in to requried sizes including fixing with new cadmium plated screws and cup washers complete all as specified and as directed.

M & L for replacement of PVC polycarbonate rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of following size make cutting for fixing existing switches, sockets, regulators and make necessary connection and testing complete all as specified and directed by Engr-in-Charge.

100 x 100 mm x 50 mm deep

200 x 150 x 50 mm deep

250 x 200 x 50 mm deep

150 x 150 x 50 mm deep

S&F stop valve, cast copper alloy screw down high pressue crutch handle, screwed both end for iron pipe suitable for 15 mm bore all as specifed and directed by Engr-in-Charge.

Decarbonizing of indoor MCB / meter box any type removing unserviceable MCCBs, burnt busbars, unserviceable indicator lamps, unserviceable Ammeter, unserviceable Volt meter, replacing burnt, damaged bus bar of any size and fixing proper hanging front and rear openings, welding of hinges including welding of brokieng MS sheet using extra sheets replace burnt thimbles with new existing size thimbles replacing with new MCCB & MCBs, powder coating painting with suitable 'U' type gasket to make it dust and vermin proof, providing fancy locks incluidng dismantling the existing connected cables and re-connecting the same cables complete all as specified and directed by Engr -in- charge. Note : (i)MCCBs,indicator lamps,Ammeter, Volt meter, will be measured & paid separately as supply only. (ii) necessary MS sheet and welding incuding sealing the meter with sealing Lead/PVC seal with MES Emblum empossing on it all are inclusive coated rate. (iii) Required size of neutral bus bars including coated rate. (iv) Required size of copper cable for connecting MCBs and meters are including quoted rate.

metro electrical services

PURVA ELECTRICALS AND ENGINEERS

ONKAR ELECTRIC AND GENERAL STORE

ASHWAMEDH ENGINEERS

M/S. OM ENTERPRISES

TULAJA ENTERPRISES