E-Tender No. 91/2023-24, EUDC-II, Noida

Amount

fo|qr forj.k [k.M xzsVj uks,Mk ds vUrxZr 11 dsoh ds yEcs LiSuks ds chp esa iksy] dzklWvkeZ bUlqysVj] leLr iksy lkexzh ds lkFk yxkus dk dk;Z a

Safe carriage of following stock material, from any of the Store Center of PVVNL to work site including Loading from Store and safe unloading at site for Item No. 3 to 4

11kv Pin Insulatar With Pin

Pcc Pole 8.5 Mtr Long

SUPPLY OF FOLLOWING MATERIAL BY THE CONTRACTOR FROM THE PVVNL APPROVED VENDORS AS PER GTP APPROVED.

11KV Cross Arm 100x50x6 mm G.I channel for 11KV line

Supply and Errection of above the Following material for completing the work as per RESPO.

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 'F' bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. Single Pole (a) 8.5Mtr. Long PCC Pole

Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. Single Pole and Double Pole (a) 8.5Mtr. Long PCC Pole

FIXING OF PIN INSULATOR WITH PIN, COMPLETE WORK IN ALL RESPECT.

FIXING OF 11KV CROSS ARM AS PER SITE REQUIREMENT COMPLETE WORK IN ALL RESPECT.

SUPPLY AND FIXING OF BEST QUALITY CLAMPS FOR CROSS ARM AS PER SITE REQUIREMENT.

fo|qr forj.k [k.M xzsVj uks,Mk ds vUrxZr fo|qr nq?kZVuk jksdus gsrq xkfMZx dk dk;Z

SUPPLY OF FOLLOWING MATERIAL BY THE CONTRACTOR FROM THE PVVNL APPROVED VENDORS AS PER GTP APPROVED.

G.I Guarding angle 75x75x6 mm, (6.80kg/mt)

G.I. Wire 6 SWG

G.I. Wire 10 SWG

Eye Bolts and washers for guarding Wires

Errection of above the Following material for completing the work as per RESPO.

Guarding between two poles like single poles, double poles, four poles, etc. to guard L.T., 11KV Line telephone line and river crossing, road crossing etc. with G.I.wire No.6SWG and G.I.wire No.10SWG including cutting with fabrication and fixing of G.I.Guarding angle 75x75x6mm with Providing & fixing G.I.clamps size 75x10mm, G.I.Turn buckle, G.I.Eye bolt, nut bolts & washer etc, as per drawing.

Shiv Electricals