SPECIAL REPAIRS TO BLDG NO P-134 (TOTAL 15 MD ACCN) AT BALWANT LINE AT CMP CENTRE AND SCHOOL UNDER GE (SOUTH) BANGALORE.

Amount

Dismantling floor hearth/ stone slabs/mosaic tile flooring or wall tiling including cement mortar bedding (but not backing) or plastering and removing servicebale tiles to stores and rubbish off the same out side the MD land complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed of 15mm thick in CM 1:6 etc complete all as specified and directed.

S&F coloured glazed ceramic tile in vertical surface 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering CM 1:4 backing coat complete all as specified and as directed.

M&L 18-20 mm thick Granite black colour including rounding edges to exposed portion as in platforms for wash hand basin / sink (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid in cement mortar (1:4),10mm thick incl pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade granite including cutting for securing of slab,including after dismantling of existing any type of stone or concrete etc complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or sub floors finishing the surfaces even and rough to receive the topping layer complete all as specified and directed.

Demolition of reinforced cemet concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including cutting of reinforcement

M&L for Demolition of un reinforced cement Concrete of any description and in any position not otherwise specifically provided for sunken slabs

M&L for PCC 1:5:10 type E2 ( using 40 mm graded stone aggregates) for sunken slabs

M&L 10mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finished the surfaces even and fair complete all as specified and as directed.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

M&L Bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5kg. per sqm per coat complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 Sqm etc complete all as specified and directed.

Taking down steel windows glazed and gauged with guard bars exc 0.50 Sqm and n.exc 1.0 Sqm each and including all fittings and fixtures and removed to from site and disposed off outside MD land complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F rectangular/Square hollow mild steel section as in purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

Taking down steel windows glazed and gauged with guard bars exc 1.0 Sqm and n.exc. 1.50 Sqm each and including all fittings and fixtures and removed to from site and disposed off outside MD land complete all as specified and directed

Taking down or detaching old MS grill by cutting and refixing in the same location incl. all necessary arrangement and T&P by contractors own arrangement of size exc. 0.5 sqm and not exc. 1 Sqm each with PCC (1:3:6) type C-1 using 20mm graded stone aggregateand incl. all fittings and fixtures and removed from site and disposed off outside MD land after measurement, entry in MB as Sch of credit material and signature by both parties complete all as specified and directed.

Taking down or detaching old MS grill by cutting and refixing in the same location incl. all necessary arrangement and T&P by contractors own arrangement of exc. 1 Sqm and not exc. 1.5 Sqm each with PCC (1:3:6) type C-1 using 20mm graded stone aggregateand incl. all fittings and fixtures and removed from site and disposed off outside MD land after measurement, entry in MB as Sch of credit material and signature by both parties complete all as specified and directed.

S&F for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165etc. complete, as specified.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length incl all necessary fittings complete as per direction of Engineer-in-Charge. complete all as specifed.

S&F Factory Made Solid PVC Moulded Door Shutter,with particle board 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with particle board core.

S&F 30 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc divided in to squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered complete all as specified.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard 2/3 track sliding/rectangular/square section of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified.

S&F powder coated Anodised aluminium sliding window shutter type without sash bars, aluminium sections weighing 0.55 kg/m including powder coating of any colour ,thickness not lessthan 50 microns necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary locking arrangement and roller complete all as specified

M&L 18mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc complete all as specified and as directed .

M&L 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc complete all as specified and as directed .

M&L for 0.9mm thk Decorative laminate type I of surface finish ,colour and pattern as approved fixed with approved adhesive all as per makers instructions and etc complete all as specified and as directed.

S & F 6mm thick teak wood lipping to exposed surfaces of block board or particle board fixed with nails complete all as specified and as directed.

S&F soft closing hinges for cabinets doors complete all as specified

S&F MS 40mm dia, drawer/cupboard knobs fixed with nut, screw and washer of brass polished, bright finished complete all as specified.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S & F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

S&F 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified.

S&F cold rolled mild steel butt hinges medium weight of size 100mm fixed complete all as specified and as directed.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

S&F 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

S&F 150 mm size extruded aluminium alloy handles fabricated type with plate anodized complete all as specified.

S&F for floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete all as specified

S&F mild steel 150 mm helical door springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified.

S&F in repair 25mm dia stainless steel curtain rod including 2 Pair of fancy type brackets/corners with each piece of curtain rod ,fixed with 45cm long mild steel screws complete all as specified

Cutting chases, pinning in, stone concrete block or slabs wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth and removal of debris otside of MOD land complete all as specified.

S & F in repair of CPVC pipes 25mm Incl. SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified.

S & F in repair of CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified.

S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed.

S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed.

S&F of 20 mm dia female/male brass threaded adapter complete all as specified and as directed.

S&F of 15 mm CP extension nipple complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) floor/Nahani trap, plain with grating including solvent cement with dismatnling of old nahani trap with necessary PCC/ cement work complete all as specified and as directed.

S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed.

S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed.

S&F PVC bends any radius 75mm dia with access door complete all as specified and as directed.

S&F PVC bends any radius 110mm dia with access door complete all as specified and as directed.

S&F PVC Single T any radius 110 mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) branch piece, double (double Y) equal or unequal any radius 110 mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) branch piece, double (double Y) equal or unequal any radius 75 mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) 75 mm vent cowl complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) 'P' or 'S' trap including dismantling of old Water closet complete all as specifed and as directed.

S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short/long bendetc. complete all as specified and directed

S&F in repairs PVC connection 15 mm size 60cm long with PTMT adopter,check nuts and washer on both sides for cold water complete all as specified.

S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repairs 2 way bib cock double handle with flange and all necessary fittings all as specified and directed.

S&F in repair, bib taps, brass, fancy type, long body, chromium plated for 15 mm bore pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair 15 mm bore diameter brass CP wall mixer mixing hot & cold water complete all as specified and as directed.

S&F in repairs 15mm dia quarter turn swan neck pillar tap for WHB brass fancy type, chromium plated complete all as specified

S&F in repairs 15 mm nominal bore stop valves/angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed .

S&F in repairs over head shower chromium plated 95 mm dia with 3 flow with SS over head shower arm of 180mm with flange complete all as specified and directed.

S&F,in repairs 15mm size health faucet, ABS body , with wall hook and 1 metre stainless steel braided rubber hose pipe complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 32 mm dia PVC collapsible waste pipe for WHB/Kitchen sink complete all as specified.

S & F in repairs looking mirror of 5 mm thick 500mmx700mm with double coat for protection and longevity grounded edges for safety and silver plating on the back for better refelection and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed.

S&F in repairs Glass corner shelf including CP railing, radius 300 mm complete all as specified and directed by the Engr-in-Charge, fixed in repairs.

S&F in repairs SS soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed

Taking down plastering incl raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and fair complete all as specified and as directed.

M&L for newly plaster surface of walls and applying two coats of oil emulsion distemper over a coat of primer over 1 mm thick wall care putty, including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, complete all as specified and directed.

M&L for washing, rubbing and brooming for preparation of existing surface and cleaning with water of old painted surfaces of walls and applying two coats of oil emulsion distemper over a coat of primer over a coat 1 mm thick wall care putty, including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, complete all as specified and directed.

M&L rendering 15mm thick in CM (1 :4) with liquid WPC as per manufacturers instruction on fair faces of brick work or concrete surfaces finshed even and fair complete all as specified and as directed. (Note : WPC will be measured and paid separately) under relevemt item of this schedule.

M&L for newly plaster surfaces of Wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm incl all necessary safety norms to the workers all as specified and directed. Note:- Painting of external wall surfaces catered for G+3 Bldg and contractor have to arrange Scaffolding for the same for painting of outer surface and quoted rate will be inclusive of all scaffolding work. No extra payment will be considered

M&L for rendering 5mm thick in CM 1:3 on ceiling of concrete surfaces finished even and smooth without using extra cement including taking down plaster, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coat of oil emulsion, distemper incl priming the surface with alkali resistant primimg paint complete all as specified and as directed.

M&L for preparation of old decorated /painted surfaces of ceiling and applying one coat of oil emulsion, distemper all as including cleaning splashes of distmeper on floor/objects etc all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

M&L for RCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) for shelves, chajjas and similar location complete all as specified.

M &L providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in roof/Chajjas kerb or mud stops, rounded or chamfered as pading concerete.

M&L for mild steel TMT bars 10 mm cut to length bend to shape require including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips all as specified and as directed.

M&L for mild steel TMT bars 6 to 8 mm cut to length bend to shape require including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips all as specified and as directed.

S&F for Providing and erecting at site self supported steel H- Frame Scaffolding only for structural repairs of column,beams, chajjas, balconys, fins/facaias with cross bracings of good quality without dents and corrosion to reach place of work including approchases, extensuion, working platform ladders, lifting tackel necessary wall anchores for men and materials till completion of all structural repair items of work and curring period etc. complete. The work should be caried out with all the safety belt and adequate labour insurance under the supervision of qualifed supervisor this item should be used only for structural repair work for entire period of building. ( Payment should be only once irrespective of duration of scaffolding.) etc. complete

M&L for Breaking carefully the loose concrete of distressed member without damaging existing storng concrete by means of sharp chiesel which should tempred regularly of high frequancy low impact hammeris used, cleaning the surface by water jet pressure pump at 4 to 5 kg/ sqcm pressure to remove chlorides and loose particals , air drying the surface etc. The work should be carried out with all the safety measures like helmet , safety belt and adequate labour insurance under the supervision of qualifed supervisor. etc. complete

M&L for applying two coats of concrete penetrating hi- tech corrosion inhibition mechanism inhibits corrosion of steel in concrete at the poles, cathode & anodic simultaneously on concrete surface which is prepared earlier. The work sholud be be carried out with all the safety measures like like helmet , safety belt and adequate labour insurance under the supervision of qualified supervisor. ( The damage ceiling/ concrete all be measured) etc. complete. Make: Sika, SP Concare, Chembond, Krishna Conchem, FOSORC Chemicals, Dr. Fixit, ROFF, CICO, BASF, Hilti/Fischers, Sunanda Speciality Coatings Pvt. Ltd.

Providing and applying approved epoxy resin before polymer plaster/ concrete to have the perfect bond between old concrete and new concrete/ polymer plaster surface confirming to ASTM-C- 882-87 using nylon brushes scaffolding labour etc. complete. Make: Sika, SP Concare, Chembond, Krishna Conchem, Fosroc Chemicals, Dr. Fixit, ROFF, CICO, BASF, Hilti/Fischers, Sunanda Speciality Coatings Pvt. Ltd.

Making up lost section of concrete / mortor with 30 mm thick thixotropic repair mortor is one component thixotropic dual shrinkage compensated fiber reinforcement formulation for structural members. Build up section by hand packing as per manufacturers specfication , applied by mean of hand glouse by expert applicator, the rehabilated surface should be free from air gaps, voids should be in line with existing requried line and line with existing surface,including curing, cleaning the area etc. complete. The work should be carried out with all the safety measures like helmet, safety belt and adequate labour insurance under the supervision of qualifed supervisor etc. complete. Make: Sika, SP Concare, Chembond, Krishna Conchem, Fosroc Chemicals - Renderoc HS Xtra, Dr. Fixit, ROFF, CICO, BASF, Hilti/Fischers, Sunanda Speciality Coatings Pvt. Ltd.

Providing and applying 15 mm thick polymer mortar to load carrying R.C.C member in two layers in proportion of 1:5:15 by weight with polymer of approved quality and make, cement and wash quartz sand with requried W.C. ratio for desired floating, curing after initial setting time etc. complete. Make: Sika, SP Concare, Chembond, Krishna Conchem, FOSORC Chemicals, Dr. Fixit, ROFF, CICO, BASF, Hilti/Fischers, Sunanda Speciality Coatings Pvt. Ltd.

Material and labour for replacing distressed/loose/ cracked/ porous carbonated, loose part of concrete and repairing the damaged surface of concrete , fix the form work/ structural element, pour the free flow ready mix micro concrete mix with 5 1t to 7 1t of water in the form work. Micro concrete should be mixed in steel tray homogeneously makeup concrete is based on types of structural element and its location. The work should be carried out with all the safety measures like helmet , safety belt and adequate labour insurance under the supervision of qualified supervisor etc. complete. Make: Sika, SP Concare, Chembond, Krishna Conchem, FOSORC Chemicals - Renderoc RG, Dr. Fixit, ROFF, CICO, BASF, Hilti/Fischers, Sunanda Speciality Coatings Pvt. Ltd.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, for layers UG Cables or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. (Note : Earthwork required for E/M works also measured under this item)

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. (Note RFR required for E/M works shall also measured under this items)

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed

Supply only liquid water proofing compound complete all as specified and as directed.

Taking down copper / aluminium point wiring ( light, fan, socket or power) complete, including fitting & fixtures such as switches, ceiling roses, pendants, regulators, sockets , light fitting etc. removing materials to store for keeping in safe custady or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down unserviceable main switch/DB, Teak wood boards etc

M & L point wiring complete with 1.5 Sqmm Single core PVC insulated, unsheathed cable 1100 volts grade multistranded copper conductors drawn through and including casing caping required at site and its accessories fixed on surface of walls/ceilings etc including 1.6mm thick pressed steel terminal boxes concealed in walls covered with plastic laminated sheet top cover 3mm thick fixed with cadmium plated or brass screws for housing switches, socket outlets, fan regulators etc including provision of 1.5 Sqmm single core PVC insulated unsheathed copper cable with multistranded conductors as earth continuity wire connected to common earth dolly all as specified and as directed for :-

One light point controlled by one switch complete all as specified and as directed by Engr-In-Charge.

One Bell point controlled by one switch complete all as specified and as directed by Engr-In-Charge.

One fan point controlled by one switch complete all as specified and as directed by Engr-In-Charge.

One 3 pin 5 Amps socket outlet point on independent board complete all as specified and as directed by Engr-In-Charge.

One 3 pin 5 Amps socket point on the same board with other switches complete all as specified and as directed by Engr-In-Charge.

S&F call bell, musical type, 230 volts AC Single pole complete all as specified and as directed by Engr-In-Charge.

All as per item No 3 here in before but wiring with 2.5 sqmm unsheathed single core PVC insulated multistranded copper conductor for 3 pin 15 Amps socket outlet complete all as specified and as directed by Engr-In-Charge.

M & L switch piano, flush type single pole, one way 5 Amps complete all as specified and as directed by Engr-In-Charge.

M&L switch socket outlet 2in1, 3pin,5A complete all as specified and as directed by Engr-In-Charge.

M&L switch socket outlet 2in1, 3pin 15A complete all as specified and as directed by Engr-In-Charge.

M&L ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and as directed by Engr-In-Charge..

S&F steped type electronic fan regulator flush type, 230 volt, AC complete all as specified and as directed by Engr-In-Charge.

S&F MCB Single pole, 240 volts 6 to 32 Amps complete all as specified and as directed by Engr-In-Charge.

S&F MCB Single pole and neutral 06 to 32 Amps, 240 Volts complete all as specified and as directed by Engr-In-Charge.

S&F MCB triple pole and neutral 32 to 63 Amps, 415 Volts complete all as specified and as directed by Engr-In-Charge.

M & L for lamp holder , PVC/ Polycarbonate type with back plate sutaible for LED 9W lamp fittings Complete all as specified and as directed by Engr-In-Charge.

Supply and fixing of LED lamp 9W including driver holder Complete all as specified and as directed by Engr-In-Charge.

S&F sheet metal enclosure (for DB's when MCBs to be used), Single pole and neutral double door, 8 way, 240 Volts complete all as specified and as directed by Engr-In-Charge.

S & F in replacement VTPN DB - Dobule Door made out of CRCA mild steel sheet flushed in wall, TPN 4 way with 200 Amp rated bus bar, 415 volt with PVC MCB blanking plate, stove enamelled for incorporated of MCBs, insulators and MCCB of capacity upto 125 Amps TP/FP etc, complete all as specified and as directed by engineer in charge

M&L submain wiring with 2 runs of single core 6 sqmm size PVC insulated unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC conduit and its accessories including provision of one run of 6 sqmm PVC insulated single core unsheathed copper multistranded conductor cable as earth continuity wire complete all as specified and directed including taking down of existing submain wiring casing and caping/conduit type with 2 runs of 6 sqmm aluminium conductor complete all as specified and as directed by Engr-In-Charge.. Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.

Supply and fixing surface mounted Mini Mirror light LED batten 2feet with extruded aluminium housing and robust construction 10 W system lumen with all accessories if required flexible copper 2 core wire from fitting to ceiling rose all as specified and directed by Engr-in-Charge.

Supply and fixing surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 20 W system lumen including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories all as specified and directed by Engr-in-Charge.

S & F LED flood light 30W made up of pressure die cast aluminium housing wth toughened glass and LEDs as a light source prewired with electronic driver suitable for 30 watts light fitting with IP 65 protection with Surge protection device for protection of LED driver, lumen efficacy of light fitting shall be not less than 100 lm/W. with necessary mounting arrangements colour as per deside at site including taking down old unserviceable light fitting.complete all as specified and directed by Engr-in-charge.

S&F in replacement wall mounting fancy light fitting in plastic body with lamp holder B22 base and diffiuser sutaible for and including 9w LED Lamp of colour as decided with mounting provision complete all as secified as directed by Engr-in-Charge.

Taking down unserviceable ceiling fan, wall mounted fan, cabin fan, exhaust fans etc of any type and size from position, disconnecting electric supply, repair/replacement of unserviceable items, including cleaning oiling/greasing,tightening of nut bolt and refixing matching with existing. complete all as specified and directed by Engr-In-Charge.

Supply only following items to be fixed under item no 137 complete all as specified and directed by Engr-In-Charge. Ball/Roller bearing of size and shape matching with existing suitable for ceiling fans

Ball/Roller bearing of size and shape matching with existing suitable for ceiling fans

Gun metal bush of size and shape matching with existing suitable for exhaust fans

Gun metal bush of size and shape matching with existing suitable for Exhaust fans

Motor stator for ceiling fans wounded with copper wire of size matching with existing with insulation with casing complete.

Motor stator for exhaust fans upto 250 mm sweep wounded with copper wire of size matching with existing with insulation and casing matching with existing complete.

Motor rotor prewired for ceiling fans of size and type matching with existing

Motor rotor prewired for Exhaust fans/wall mounted fans of size and type matching with existing

Fan blades for ceiling fan of any type and size matching with existing

Fan blade for exhaust fan metal body any type and size with mounting provisions matching with existing.

Plastic cup with screw for ceiling fans

Rubber bush with MS bolts, nuts & washers with 'U' clamps for ceiling fans complete all as specified and as directed.

S&F in replacement capacitor 2.5 Mfd suitable for ceiling / exhaust /wall mounting fans complete all as specified and as directed.

S&F in replacement down rod of 30/45 cm with nut, bolts and safety pin for ceiling fans complete all as specified and as directed.

M&L for Preparation of surface & painting the ceiling fans with blades complete after cleaning & applying one coat of stove enamelled white paint by spray painting, writing No complete all as specified & as directed by Engr -in-Charge.

M&L for Preparation of surface & painting the Exaust fans with blades complete after cleaning & applying one coat of stove enamelled white paint by spray painting, writing No complete all as specified & as directed by Engr -in-Charge.

Taking down, dismantling of geysers of any type/capacity from site for repair and Inspection, cleaning, descaling, brazing inner tank, internal wiring including replacement of unserviceable items as reqd, reassembling & reinstallation after necessary repair incuding testing after repair complete all as specified & directed. Note :(a) Replacement of major unserviceable items shall be measured & paid separately under respective item of work.. (b)Cost of replacement for minor items like washers, gaskets, nuts, bolts etc and items not mentioned below is deemed to be include in quoted rates.

Supply only following items to be fixed under item no -27 complete all as specified and directed by Engr-In-Charge. Inner tank for geyser of capacity 25 ltrs of shape matching with existing.

Siphon Assembly suitable for geyser of capacity 25 ltrs of shape matching with existing.

Heating element rated 1.5/2.0 KW with mounting provisions round/tikona as reqd of shape matching with existing

Thermostat with auto cutoff provision switch capillary/screw type, with range 0-80 deg celcius of shape and size matching with existing suitable for geyser of capacity 25/50 Ltrs.

Indicator lamp red and green with coloured diffuser for geysers matching with existing.

Safety valve/high pressure valve matching with existing for geysers

NRV for geysers matching with existing.

Base fixing cover matching with existing.

Cover outer for geyser of capacity 25/50 ltrs of shape and size matching with existing.

Supply , lay, test & commisoning LT UG cable XLPE insulated sheathed and armoured, with aluminium stranded conductor, LT 1100 Volts grade of SSRze 35 sqmm 4 core complete all as specified and as directed by Engr-In-Charge.

Removing excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 M above the starting point all as directed.

M&L for sand cushioning in trenches for bricks of u/g cable with coarse sand laid dry in trenches with uniform thickness complete all as specified and as directed by Engr-In-Charge.

Supply and lay burnt bricks of sub class 'B' laid dry across in trenches for cable protection all as specified and directed Complete all as specified and as directed by Engr - In - Charge.

Supply and laying 40 mm GI pipe fitting tubes medium grade galvanished with all fittings complete laid in trenches including taking down the old unserviceable GI pipe from trenches Complete all as specified and as directed by Engr-In-Charge.

Supply and laying 25 mm GI pipe fitting tubes medium grade galvanished with all fittings complete laid in trenches including taking down the old unserviceable GI pipe from trenches Complete all as specified and as directed by Engr-In-Charge.

Supply and laying 15 mm GI pipe fitting tubes medium grade galvanished with all fittings complete laid in trenches including taking down the old unserviceable GI pipe from trenches Complete all as specified and as directed by Engr-In-Charge.

Supply and laying 20 mm GI pipe fitting tubes medium grade galvanished with all fittings complete laid in trenches including taking down the old unserviceable GI pipe from trenches Complete all as specified and as directed by Engr-In-Charge.

S & F of float valves of size 20 mm and as reqired at site as complete brass fitting with rod and plastic ball Complete all as specified and as directed by Engr-in-in Charge.

Supply and fixing bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule but fancy type of size 15 mm complete all as specified and as directed .

S & F gun metal gate valve with inner wheel head, screwed both ends in iron pipe and fixed of Size 20 mm Complete all as specifed and as directed by Engr-In-Charge.

S&F in replacement meter box, Size not less than 900mm x 900MM x 250MM , fabricated out of sheet steel, wall mounting meter box suitable for mounting 8 nos energy meters of size matching with existing, concealed type, painted with stove enamelled paint over a coat of red oxide primer on 2.0 mm thick sheet steel, weather proof with double stud hinged door front open with internal locking arrengement and externally locking arrengement with aldrop bolt and meter mounting sheet sutaible size should be fixed inside box including dismantling old meters and cutouts from old box and refixing energy meter with complete connection in new meter box complete all as specifed and as directed by Engr-In-Charge.

M & L earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of G I or steel all as shown in electrical plate No. 5 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, 20 mm dia GI pipe medium grade for watering purpose,necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified and as directed by Engr-In-Charge.

SKANDA CONSTRUCTIONS (BID ID -3463666)

M AND V ENTERPRISES (BID ID -3468405)

Srisrinivasaenterprises (BID ID -3458023)

M/S POTHIRAJ AND CO (BID ID -3468914)

PRAGATHI BUILDERS (BID ID -3468846)