Loading…
Loading…
Tender Value
₹2.8 Cr
EMD Value
₹2.9 L
Closing Date
3 Feb 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DIVISION
13 conditions · 2 needing a document upload
Financial Eligibility Criteria:--- The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria:--- (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. (Please refer Tender booklet for further clarification) Similar Nature of work - Any type of civil work viz. building up to G+4 and structures work, pipe lines, underground and overhead tanks, foundation treatment works in any Railway embankment/cutting, any earth work, cover over platform, bore wells, level crossing works including lifting barriers, cement concrete apron works etc.
4 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
As per tender document attached.
Tenderers may please note - During lockdown period (declared due to COVID - 2019 pandemic) - A) Necessary authority to travel to site of work on a specific request indicating date shall be issued by Railway Administration to facilitate site visit. B) TC meetings and Negotiation can be conducted through online Video/Audio chat on conference call. Record of same should be kept.
Sch(1) Khandwa:-Improvement to water supply lines from filter house to RCC tank of Ghaspura colony and chidiya maidan colony and extenion of WRP water supply line from PF No.5 to PF No. 1/2 and repairs to pump installation of Aabna pump house, filter house and Pump room No.01 (ID No.01.01.51.25.3.00.016) (2) Bhuranpur(BAU)- Replacement of old damaged Water tank by 140000 ltr capacity RCC HS tank at Bhurahanpur.(ID No.01.01.51.25.3.00.017) (3) CDI-Provision of EI (Panel) building at Chandni.(ID No. 01.01.33.25.3.50.003)
DRMWBSL022026t1~CR
DRMWBSL022026t1
Open
Works - General
9 Months
Jalgaon, Maharashtra
₹0
₹2.9 L
3 Feb 2026
9 Jan 2026
20 Jan 2026
37 items across 2 schedules · ₹1,02,56,459.11 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Cost of carriage including loading, unloading & stacking for first 50 metres | cum | 130 | 227.18 | 29,533.4 |
| 2 | All kinds of soil | cum | 138 | 177.5 | 24,495 |
| 3 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 62 | 7,878.5 | 4,88,467 |
| 4 | Foundations, footings, bases for columns | Sqm | 78 | 392.15 | 30,587.7 |
| 5 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 64 | 392.15 | 25,097.6 |
| 6 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 124 | 736.4 | 91,313.6 |
| 7 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 105 | 961.3 | 1,00,936.5 |
| 8 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 5700 | 107.85 | 6,14,745 |
| 9 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 9000 | 107.85 | 9,70,650 |
| 10 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 58 | 9,504.75 | 5,51,275.5 |
| 11 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 66 | 9,860.4 | 6,50,786.4 |
| 12 | Cement Mortar 1:6 (1 cement : 6 coarse sand). | cum | 28 | 6,295.15 | 1,76,264.2 |
| 13 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 56 | 9,095.05 | 5,09,322.8 |
| 14 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 2200 | 117.35 | 2,58,170 |
| 15 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 4800 | 133.7 | 6,41,760 |
| 16 | Hot finished seamless type tubes | Kg | 800 | 206.35 | 1,65,080 |
| 17 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 1350 | 172.6 | 2,33,010 |
| 18 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 152 | 738.65 | 1,12,274.8 |
| 19 | Ridges plain (500 - 600mm) | Metre | 22 | 532.35 | 11,711.7 |
| 20 | 1:4 (1 cement: 4 fine sand) | Sqm | 360 | 399.45 | 1,43,802 |
| 21 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 480 | 116.9 | 56,112 |
| 22 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 12 | 2,434.25 | 29,211 |
| 23 | In lime mortar | cum | 48 | 1,158.1 | 55,588.8 |
| 24 | Channels, angles, tees and flats | Kg | 1068 | 2.3 | 2,456.4 |
| 25 | G.S. Sheet | Sqm | 180 | 164.95 | 29,691 |
| 26 | Asbestos Cement sheet | Sqm | 160 | 77.3 | 12,368 |
| 27 | Moorum | cum | 92 | 768.25 | 70,679 |
| 28 | 50 mm dia nominal bore | Metre | 20 | 762.15 | 15,243 |
| 29 | 80 mm dia nominal bore | Metre | 30 | 1,041.7 | 31,251 |
| 30 | 50 to 80 mm nominal bore | Each | 12 | 1,785.35 | 21,424.2 |
| 31 | 50 mm nominal bore | Each | 2 | 1,026.65 | 2,053.3 |
| 32 | Class I | Each | 2 | 4,791.2 | 9,582.4 |
| 33 | Class I | Each | 2 | 6,966.55 | 13,933.1 |
| 34 | Up to 600 mm dia | Quintal | 4.3 | 20,009.7 | 86,041.71 |
| 35 | 100 mm dia Ductile Iron Class K-7 pipes | Metre | 1025 | 1,257.8 | 12,89,245 |
| 36 | 150 mm dia Ductile Iron Class K-7 pipes | Metre | 1510 | 1,789.6 | 27,02,296 |
| Schedule total | ₹1,02,56,459.11 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .