CWE/D-22/2023-24

Amount

REPAIR TO CHARPOY GI PIPE NYLON NEWAR TO CHARPOY GI WITH PLY TOP (FD-220)

Replacement of old unserviceable nylon newar/old unserviceable ply top from Charpoy GI Pipe, tightening of loose components of complete charpoy. S&F 12 mm thick plywood commercial type BWR grade size 1950mmx900mmx12mm thick (in one piece only) as top of the charpoy GI Pipe with mild steel Screw bolt (Machine made) of size 75 mm long, 6 mm thick with hexagonal or square head at one end and screw the other with washer, complete all as per specified and as directed by Engr-in-charge. Make of ply : Green Ply/Century/Archid/Green Panel.

REPAIR TO CHARPOY GI PIPE WITH PLY TOP (FD-220)

M&L dismantling of existing unserviceable/broken long rail and S&F new long rail of GI pipe medium grade 32 mm size bore duly ISI marked including threading at both ends complete all as specified and directed . Make Jindal/TATA/PRAKASH.

M&L dismantling of existing unserviceable/broken short rail and cutting of old long rail obtained from Srl No 2.01 to the required size for short rail including threading at both ends complete all as specified and as directed by Engr-in-Charge.

Removing of Old u/s legs of Charpoy and S&F of new legs made out of old broken short rails retrieved from item Sr No 2.02 above by cutting and threading at one end and fixing 3mm thick base MS circular plates of 55mm dia duly painted at other end as directed by Engr - in - Charge.

Supply and fixing MS Iron Strips 08 Nos of size 50mmx6mm, 75mm long duly holed/drilled for tightening plywood and strip with countersunk screws/suitable nuts, bolts and washers and welded to rails of charpoys each side 02 Nos strips including two coats of synthetic enamel paint over a coat of red oxide/primer, Complete all as directed by the Engineer - in- Charge. Note : One Number of MS flat iron strip 50mmx6mmx75mm long is measured as one unit.

Supply and fixing flat MS iron 02 Nos of size 50mmx6mm thick , 900 mm long providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with long rail with countersunk screws/suitable nuts & bolts with washers on both sides of flat MS iron and including preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide/primer, Complete all as directed by the Engineer - in- Charge. Note : One Number of MS flat iron strip 50mmx6mmx900mm long is measured as one unit.

M&L dismentling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitable for GI Pipe med grade 32 mm bore pipe complete all as specified and directed .

S&F in replacement of unserviceable check nut 6 mm thick suitable for 32 mm bore GI pipe charpoy of approved make complete all as specified and directed .

REPAIR TO CHAIR EASY CUSHOINED Drg No. (TP) -

S&F in repair approved upholstery like FRC sheet 80 mm Markeen, Hassian cloth and tapestry cloth first quality for chair easy cushioned for seat and back including taking down the old unserviceable upholstery. Note : Colour, shade, texture design pattern and quality of tapestry cloth shall be as approved by GE/Engr-in-Charge. The cost of tapestry cloth shall not be more than Rs. 250.00 per RM complete all as directed by the Engr-in-Charge.

Legs Made of 1st Class hard wood (Teak Wood)

Side rail for seat Made of 1st Class hard wood (Teak Wood)

Front/Back Rail for seat Made of 1st Class hard wood (Teak Wood)

REPAIR TO CHAIR DINING WITH LONG BACK (TP) :

S&F in replacement of unserviceable seat and back of chair dining long back and upholstering the same as per existing pattern with seat and back with 100 mm thickness 40 density as specified and as directed by the Engr-in-Charge

REPAIR TO ALMIRAH MED STEEL DRG, TP/(FD-1032) :

Dismantling of unserviceable bottom legs, S& F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer made of 1 mm thick PBI sheet by welding.

S&F of cleats shall be made of 2 mm thick MS Steel made to shape and fix in the Almirah to support the shelves complete as directed.

S&F in replacement of unserviceable shelves with new shelves to be made of 1 mm thick MS sheet duly painted made shape and size as specified in drg or as directed by Engr -in-Charge.

Dismentling of unserviceable bushes of locking asembly and S&F new MS bushes of locking assemly as directed by Engr-in Charge.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping of existing coat of paints filing, finishing and painting of Almirah Medium Steel with two coats of synthetic enamel paint in dual shade of approved color (make Berger/AsianPaint) with spray including complete removal of existing paint over a coat of red oxide primer as directed by Engr-in-Charge.

REPAIR TO ALMIRAH LARGE STEEL/ 1/2 H 1/2 S/WITH SHELVES (FD-1031) :

S&F of cleats shall be made of 2 mm thick MS Steel made to shape and fix in the Almirah to support the shelves complete as directed

Dismentling of unserviceable bottom legs, S& F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer made of 1 mm thick PBI sheet by welding.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping of existing coat of paints filing, finishing and painting of Almirah Medium Steel with two coats of synthetic enamel paint in dual shade of approved color (make Berger/AsianPaint) with spray including complete removal of existing paint over a coat of red oxide primer as directed by Engr-in-Charge.

REPAIR TO BED HARD PLY TOP STEEL (FD/E6/MAP/08(R) :

S&F in replacement of unserviceable top of bed hard steel to be made of 12 mm thick (7 Ply) commercial plywood BWR grade, confirming to IS 303-1989 and ISI marked and to be fixed with appropriate sizes of SS nuts & bolts with washers without having any joints after tightening of frame by welding. make : Green Ply/Century Ply/Archid Ply shape and size as per drg and as directed by Engr-in-Charge.

REPAIR TO HEAD BOARD : Removing of unserviceable board of head rest and S&F new board of Head rest to be made of 18 mm thick Ext grade MDF prelaminated (Both side) board of approved shade duly covered with PVC beading 2 mm thick all around (Make : Action Tesa/Novapan/Green Pannel) of size with suitable Screws with the cleats as specified on drg and as directed by Engineer-in-Charge.

REPAIR TO FOOT BOARD :All as per Srl item No. 7.02 but for foot board.

M&L, scraping of existing coat of paints complete filling, finishing and painting of Bed Hard steel with two coats of synthetic enamel paint (Make: Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed by Engr-in-Charge.

S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge.

M&L for removing the existing broken or unserviceable components of wooden furniture items as given below from Srl No. 9.00 to 19.00 including preparation, S&F New Ist class hard wood well seasoned teakwood free from cracks and dead knots including two coats of PU polish to all replaced components complete to match the original all as specified in drawings and as directed by Engineer-in-Charge :

REPAIR TO TABLE DINING FOR 6/8 PERSONS (FD-273, FD-376) :

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated (Both side) board of approved shade Make : Action Tesa/Novapan/Green pannel (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top.

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

REPAIR TO TEAPOY WOODEN (FD-232/278/382) :

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF Prelaminated (Both side) board of approved shade Make : Action Tesa/Novapan/Green panel (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top.

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

Centre/Side stiffener made of Ist class hard wood (Teak wood).

REPAIR TO TABLE PEG (FD-384/277)

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF Prelaminated (Both side) board of approved shade Make : Action Tesa/Novapan/Green panel (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top.

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

Centre/Side stiffener made of Ist class hard wood (Teak wood).

REPAIR TO TABLE WRITING TP/(FD-275)

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF Prelaminated (Both side) board of approved shade Make : Action Tesa/Novapan/Green panel (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top.

Legs made of Ist class hard wood (Teak wood).

Side/Bottom Rail made of Ist class hard wood (Teak wood).

Front/Back Rail made of Ist class hard wood (Teak wood).

Centre Stiffener made of Ist class hard wood (Teak wood).

S&F in repair shutters to be made of 18 mm thick prelaminted MDF board of ext grade edging all around with teak wood beading of 4 mm thick with piano type hinges/MS Hinges with approved SS knob/Handle.

S&F drawer to be made of sides and back of 12 mm commercial ply wood BWR , bottom of 6 mm thick commercial plywood , Front top of 18 mm thick prelaminated ext grade MDF board whatever shown on drg including SS knobs/Handles bears including removing of unserviceable drawer..

S&F in replacement of unserviceable back ply shall be 6 mm commercial ply BWR of size as existing. .

REPAIR TO TABLE CENTRE/ 2 TIER (FD-274)

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF Prelaminated (Both side) board of approved shade Make : Action Tesa/Novapan/Green panel (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top.

Legs made of Ist class hard wood (Teak wood).

Front rail made of Ist class hard wood (Teak wood).

Side Rail/stiffener made of Ist class hard wood (Teak wood).

REPAIR TO TABLE DRESSING LADIES WITH MIRROR (FD-32(M)/251/378/MAP) :

S&F, in repair, unserviceable looking mirror 5 mm thick Make : Modi Guard/Atul along with new 6 mm thick commercial plywood back of mirror frame. Make : Green ply/Archid/Century Ply

S&F Glass panes of shutters made of 5mm thick plane glass as existing of Make: Modiguard/Saint Gobain with aluminium sliding .

New 1st Class hard wood (Teak Wood) Frame for 5mm thick mirror of dressing table ladies complete.

S&F, in repair, unserviceable Back of the Table Made of 12 mm thick Ply wood as shown in Drg.

S& F new drawers as per drawing

REPAIR TO TABLE DRESSING GENTS WITH MIRROR (FD-230) :

S&F, in repair, unserviceable looking mirror 5mm thick Make : Modi Guard/Atul along with new 5.5/6 mm thick commercial plywood back of mirror frame including two coats of French Polish to all parts. Make : Green ply/Archid/Century Ply/

S& F new drawers as per drawing

Top/Bottom of Made of 18/19 mm thick Exterior grade Prelaminated both side MDF Board as shown in Drg.

Sides/Partition of Box Made of 18/19 mm thick Exterior grade Prelaminated both side MDF Board as shown in Drg.

Back of the Box Made of 18/19 mm thick Exterior grade Prelaminated both side MDF Board as shown in Drg.

REPAIR TO HAT STAND WITH MIRROR (FD-233 ) :

S & F Peg hook brass as per drg.

S&F in replacement of unserviceable mirror with new mirror 5 mm thick of make : Atul/Modiguard/Saint Gobain

M&L in replacement of unserviceable front ply and S&F new ply 3/4 mm thick one side teak faced

M&L in replacement of unserviceable Back ply and S&F new ply 3/4 mm thick

REPAIR TO SOFA SET 3 PCS 5 SEATER (FD-258/281)

Arms made of 1st class hard wood (Teak wood)

Wooden batten of seat frame made of 1st class hard wood (Teak wood))

Wooden batten of back frame made of 1st class hard wood (Teak wood))

Front rail of seat of 3 Seater Sofa made of 1st class hard wood (Teak wood))

Side rail of seat of 3/1 Seater Sofa made of 1st class hard wood (Teak wood))

Front rail of seat of single Seater Sofa made of 1st class hard wood (Teak wood))

Supplying and fixing in replacement foam cushion (ISI Marked IS-1741) (Make : Sleep Well/Kurl-On) 10 Nos in each set for sofa 3 pieces, 5 seater. Size of cushion 22"x21"x4" thick foam of 40 density for seat & back covered with superior quality tapestry cloth not less than Rs. 180/- per metre as approved by GE/Engr-in-charge. NOTE: The foam cushion in original packing with warranty card and tapestry cover (with zip opening system) shall be brought seperately at furniture yard and after inspection the same shall be fixed.

Removing of old unserviceable tapestry cloth from existing foam cushion, supplying and fixing superior quality tapestry cloth, size of the cover should be 22"x21"x4" with Zip opening system of best quality easy to removeable and washable not less than Rs 180/- per metre to 180/-RM as approved by GE/Engr - in - Charge to the foam cushion (10 Nos in each set) as per existing. Complete all as directed.

REPAIR TO TABLE BED SIDE STEEL (FD/E6/MAP/15(R)-

Removing of unserviceable sides in any position, S&F new sides made out of 18/19 mm thick exterior grade MDF board of approved shade Make : Action Tesa/Novapan/Green Pannel (ISI Marked) including tightening of loose joints of existing frame before fixing the sides with steel corners and screws shape and size all as specified on drg and as directed by Engr-in-Charge.

All as per Sl. No. 18.01 but for Back of Table Bed side.

All as per Sl. No. 18.01 but for top of Table Bed side.

S&F new top drawers made of MDF prelaminted board of exterior grade.

Removing of unserviceable channels in any position, S&F new steel channels with screws (ISI Marked).

S&F new SS handles for drawers of approved shape and size as directed by Engr-in-Charge.

S&F hard PVC shoes of best quality as approved by Engr-in-Charge.

CHAIR DINING CUSHIONED (FD/MAP/-II/04)

Supplying and fixing in replacement of unseviceable seat foam of 75 mm thick 40 density covered with superior quality tapestry cloth/Rexine of approved shade of premium quality as directed Engr-in-charge.

Supplying and fixing in replacement of unseviceable seat cover with superior quality tapestry cloth/Rexine of approved shade of premium quality as directed Engr-in-charge.

Rear Legs Made of 1st Class hard wood (Teak Wood)

Front legs Made of 1st Class hard wood (Teak Wood)

Stiffners centre/side Made of 1st Class hard wood (Teak Wood)

Bend Stiffners for back rest Made of 1st Class hard wood (Teak Wood)

Side rails Made of 1st Class hard wood (Teak Wood)

Wooden Corner brackets of size 65x65x20 mm

S&F of SS Knobs of approved quality.

M&L for removing the existing u/s eye hook and S&F new MS eye hook/Palmet Patti all as specified, complete in all respect at site.

S&F of PVC Shoes of white colour as approved by Engr-in-Charge.

M&L removing of old polish completly by paint remover from furniture Items Srl No 24.01 to 24.21 preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying two coat of glossy PU polish for glossy finish of approved make Asian/Berger over a two coat of sealer finally till the smooth glossy finish complete rest all as specified or as directed by Engineer-in-charge. (Note : All the work as to be executed at Anand Parvat Officer Mess & Officer's Enclave)

Chair Easy FD - 17/229/TP

Table dining 6/8 pers FD-30/239/273

Table writing FD - 33/275

Peg table FD - 25/277

Table dressing Gents FD-230/382/379

Table dressing Ladies FD- 251

Table centre/2 tier, TP/FD-214/274

Sofa set 5 seater FD - 281/258

Stool dressing FD 27/252

Hat stand FD-206/233/362

Teapoy wooden FD-232

Chair Dining, TP/MAP

Board Notice 900x600 mm with glass, TP

Bar Stool, TP

Chair Dining Long Back, TP

Magzine Stand, TP

TV Table, TP

Cofee Chair, TP

Corner Coffee Table, TP

Console, TP

Table dining with four chair, TP

SMS Enterprises

M/S CHANDER SHEKHAR

Pradeep Bros