REPAIR TO WOODEN SOFA SETS, SOFA CHAIRS, LOCKER BED SIDE (WOODEN), TABLE OFFICE OFFICER (WOODEN) and CERTAIN MISC WORKS UNDER GE (AF) BAMRAULI

Amount

Repair of under mentioned furniture items will be carried out as follows (Sl No 1.01 to 22.04):- (a) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints. (b) Work will be executed where the furniture exist in different User Units/Md accns of GE (Air Force ) Bamrauli including BSO's Furniture Yard as directed by Engineer-in-Charge (From sl No 1.01 to 22.04) (c) All Timber shall be of 1st class seasoned hard teak wood free from knots and cracks else specified in drg. (From sl No 1.01 to 22.04) (d) Anti-termite and anti-bug treatment shall be done before polishing the wooden items. (From sl No 1.01 to 22.04) (e) M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of existing polish making surfae smooth by sanding and grinding with standard workmanship as directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. Note: All material will be used to execute the work should be supplied by contractor in full no peacemeal material will be execpted. (From sl No 1.01 to 22.04)

Sofa Set 4/5 seater (FD-281) :-

Material and labour for in replacement of Arm rest made of 1st class teak hard wood of size 70mmx35mm of required shape & length complete all as specified and shown in drawing and as directed

Material and labour for in replacement of front long rail of size 35mmx70mm of required shape & length made of 1st class teak hard wood for 3 seater sofa complete all as specified and shown in drawing and directed

Material and labour for in replacement of back long rail of size 35mmx70mm of required shape & length made of 1st class teak hard wood for 3 seater sofa complete all as specified and shown in drawing and directed

Material and labour for in replacement of front rail of size 35mmx70mm of required shape & length made of 1st class teak hard wood for single seater sofa complete all as specified and shown in drawing and directed

Material and labour for in replacement of back rail of size 35mmx70mm of required shape & length made of 1st class teak hard wood for single seater sofa complete all as specified and shown in drawing and directed

Material and labour for in replacement of batten of back rest made of 1st class teak hard wood of size 51mmx20mm of required shape & length complete all as specified and shown in drawing and directed

Material and labour for in replacement of batten of seat made of 1st class teak hard wood of size 51mmx20mm of required shape & length complete all as specified and shown in drawing and directed

Material and labour for in replacement of cushion of size 560 mm X 530 mm X 100 mm thick, 40 density (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon), including tapesty cloth of best quality (cost not less than Rs.500/- per metre ) and stitching in required shade and colour including one side shall be left open by giving proper margin of cloth towards inside upto 2 inch for the purpose of washing to cover complete as per sample all as specified and shown in drawing and directed

Material and labour for in replacement of leg made of 1 st class teak hard wood of size 70mmx35mm of required shape & length complete all as specified and shown in drawing and directed.

Material and labour for preparation of old/new wooden surfaces of 5 seater by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and directed.

Material and labour for preparation of old/new wooden surfaces of 4 seater by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and directed.

Repair of sofa sets 05 seater (TP)

Material and labour for in replacement of unserviceable cloth Rexin upholstering from seat and back of sofa set of five seater (Special) with new material such Cloth Rexin of approved quality including 40 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly French polished on wooden surface from all sides complete directed. Note : Cost of cloth / Rexin shall not be less than Rs.800/-RM) and shade shall be as approved by GE Trade pattern/ Godrej/ Methodex/ Durrian complete all as specified and shown in drawing and directed.

Repair of sofa sets 04 seater (TP)

Material and labour for in replacement of unserviceable cloth Rexin from seat and back of sofa set of four seater (Special) with new material such Cloth Rexin of approved quality including 40 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly French polished on wooden surface from all sides complete directed. Note : Cost of cloth / Rexin shall not be less than Rs.800/-RM) and shade shall be as approved by GE Trade pattern/ Godrej/ Methodex/ Durrian complete all as specified and shown in drawing and directed.

Repair of sofa sets 03 seater (TP)

Material and labour for in replacement of unserviceable cloth Rexin from seat and back of sofa set of Three seater (Special) with new material such Cloth Rexin of approved quality including 40 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly French polished on wooden surface from all sides complete directed. Note : Cost of cloth / Rexin shall not be less than Rs.800/-RM) and shade shall be as approved by GE Trade pattern/ Godrej/ Methodex/ Durrian complete all as specified and shown in drawing and directed

Repair of sofa sets 02 seater (TP)

Material and labour for in replacement of unserviceable cloth Rexin from seat and back of sofa set of Two seater (Special) with new material such Cloth Rexin of approved quality including 40 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model name Goldline of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly French polished on wooden surface from all sides complete directed. Note : Cost of cloth / Rexin shall not be less than Rs.800/-RM) and shade shall be as approved by GE Trade pattern/ Godrej/ Methodex/ Durrian complete all as specified and shown in drawing and directed

Repair of sofa sets Single seater (TP)

Material and labour for in replacement of unserviceable cloth Rexin from seat and back of sofa set of Single seater (Special) with new material such Cloth Rexin of approved quality including 40 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly French polished on wooden surface from all sides complete directed. Note : Cost of cloth / Rexin shall not be less than Rs.800/-RM) and shade shall be as approved by GE Trade pattern/ Godrej/ Methodex/ Durrian complete all as specified and shown in drawing and directed

Table Bed Side {FD/E6/MAP/15}

Taking out old unservicable pre-laminated board from the back of table bed side and S&F new back with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick PVC edging all around the table top, complete, all as specified and shown in drawing and as directed

Taking out old unservicable pre-laminated board from the side of table bed side and S&F new back with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick PVC edging all around the table top, complete, all as specified and shown in drawing and as directed

Taking out old unserviceable top of table bed side and S&F new top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick PVC edging all around the table top, complete, all as specified and shown in drawing and as directed

Taking out old unserviceable powder coated telescopic channels of 1.6mm thick and S & F new powder coated telescopic channels of 1.6mm thick fitted in drawers complete all as specified and shown in drawing and directed

Taking out old unserviceable drawers of table bed side and S&F new drawers shall be with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed

Taking out old broken/ unserviceable handle from table bed side and S&F new handle as approved by GE in table bed side complete all as specified and shown in drawing and as directed

Taking out old PVC edging to table bed side and S&F new PVC edging of 1.5mm thick fix in table bed side complete all as specified and shown in drawing and as directed

M & L for welding of broken joints of Table bed side (MAP) including preparation of surface and applying two coats of black synthetic enamel paint over a coat of red oxide primer complete all as specified and shown in drawing and directed

Repair to Locker Bed side wooden ( FD-54M ) :-

Material and labour for in replacement of top of Bed side wooden with 18/19mm thick one side teak faced pre laminated particle board, ISI Marked including 6mm thick teak wood edging all-round , complete, all as specified and shown in drawing and as directed

Material and labour for in replacement of shutter with 18/19mm thick one side teak faced pre laminated particle board ISI Marked alongwith hinges as per drawing and as specified and directed

Supply and fixing 100 mm long aluminium handle, ‘D’ type, ISI Marked fixed to shutters of locker bed side , complete, all as specified and shown in drawing and as directed

Material and labour for in replacement of back side of locker bed side with 9 mm thick commercial plywood BWR grade ISI marked , complete, all as specified and shown in drawing and as directed

Supply and fixing in repair 75mm long , aluminium Hasp and staple, ISI Marked fixed to shutters of locker bed side , complete, all as specified and shown in drawing and as directed

Supply and fixing in repair CP hanging rod 20mm dia fixed to locker bed side as per drawing and as specified and directed by the Engineer-in-charge

Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and directed

REPAIR TO TABLE OFFICE OFFICER WOODEN :-

Material and labour for in replacement of top of table office officer wooden with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed

Material and labour for in replacement of leg of table of required size made of well seasoned 1st class teak wood,, complete, all as specified and shown in drawing and as directed

Material and labour for in replacement of front rail of required size made of well seasoned 1st class teak wood,, complete, all as specified and shown in drawing and as directed

Material and labour for in replacement of side rail of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed

Material and labour for in replacement of drawer with knob of required size made of well seasoned 1st class teak wood, complete all as specified and shown in drawing and as directed

Material and labour for in replacement of stiffener of required size made of well seasoned 1st class teak wood, complete all as specified and shown in drawing and as directed

Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and directed

Repair of under mentioned furniture items will be carried out as follows (Sl No 10.01 to 10.09):- (a) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints. (b) Work will be executed where the furniture exist in different User Units/Md accns of GE (Air Force ) Bamrauli including BSO's Furniture Yard as directed by Engineer-in-Charge (From sl No 1.01 to 22.06) (c) All Timber shall be of 1st class seasoned hard teak wood free from knots and cracks else specified in drg. (d) Anti-termite and anti-bug treatment shall be done before polishing the wooden items. (e) M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of existing polish making surfae smooth by sanding and grinding with standard workmanship as directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge

Table 3'X2' with / without Drawer (FD-55/284/283 or simillar ) :-Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg

Table Dining 4 Persons : (FD-273, 30 or similar type/MAP Drg) :- Top for table dining table 4 pers made of 18 mm thick BWP grade plywood (Make :- Kitply (Gold)/Century(Bond)/Archid ply (Gold) duly post -formed with 0.8 mm thick sunmica of make : (Make :- Kitply/Century/Archid ply) pasted on exposed view and other side with balancing white sunmica with suitable adhesive all as directed by GE/EIC. 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with suitable adhesive and edge banding machine all as directed by GE/EIC

Table Dining 6 Persons : (FD-273, 30 or similar type/MAP Drg) :- Top for table dining table 6 pers made of 18 mm thick BWP grade plywood (Make :- Kitply (Gold)/Century(Bond)/Archid ply (Gold) duly post -formed with 0.8 mm thick sunmica of make : (Make :- Kitply/Century/Archid ply) pasted on exposed view and other side with balancing white sunmica with suitable adhesive all as directed by GE/EIC. 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with suitable adhesive and edge banding machine all as directed by GE/EIC

Table Dining 8 Persons : (FD-273, 30 or similar type/MAP Drg) : Top for table dining table 8 pers made of 18 mm thick BWP grade plywood (Make :- Kitply (Gold)/Century(Bond)/Archid ply (Gold) duly post -formed with 0.8 mm thick sunmica of make : (Make :- Kitply/Century/Archid ply) pasted on exposed view and other side with balancing white sunmica with suitable adhesive all as directed by GE/EIC. 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with suitable adhesive and edge banding machine all as directed by GE/EIC

Table 3'X3' (FD- 88& 291or simillar):- Top for table 3'X3' made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg

Table writing (FD-33,275, DB-3982 or similar type) :- Top for table writing made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly pasted with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg

Table peg (FD-277/ 384, DB-3973):-Top for table peg made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formedwith 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg

Table centre (FD-274 / 235):-Top for table centre made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formedwith 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg

Teapoy (FD-278, 34, 382):-Top for table centre made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg

a) Anti-termite and anti-bug treatment shall be done before polishing the wooden items. b) M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of existing polish making surfae smooth by sanding and grinding with standard workmanship as directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. There should be atleast one day gap in each step during polishing. c) Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE (AF) Bamrauli including BSO's Furniture Yard as directed by Engineer-in-Charge

Table 3'X2' with / without Drawer (FD-55/284/283 or simillar)

Table 3'X3' (FD- 88& 291or simillar)

Table Dining 4 Persons (FD-273, 30 or similar type/MAP Drg)

Table Dining 6 Persons (FD-273, 30 or similar type/MAP Drg)

Table Dining 8 Persons (FD-273, 30 or similar type/MAP Drg)

Table writing (FD-33,275, DB-3982 or similar type)

Table Centre (FD-274 / 235)

Teapoy (FD-278, 34, 382)

Peg Table (FD-277/ 384, DB-3973)

Chair Easy

Chair Writing

Chair Dining

Sofa Set 5 Seater

Sofa Set 4 Seater

Charpoy IP Hard top (FD/MAP-II/01 )

M&L for in replacement of plywood from Charpoy IP Hard top with new 12mm thick plywood top of size 1980mmx900mm BWP Grade (Make: Gold from Greenply/ Club Prime from Century Ply) fixed with existing mild steel GI bolts of 6mm dia of suitable lengths including washers and nuts with painting the charpoy duly scrapped the existing paint all as specified in drg and directed

Poishing of various type of TP furniture with Duco Paint by scrubing of the full existing polish of the furniture with water paper/ sand paper with disturbing the surface of the the furniture and applying two coat of duco paint with proper spray painting machine and gun to give it aesthatic or uniform look as required complete all as specified and directed by the Engineer-in-Charge.There should be atleast one day gap in each step during polishing

Table Executive

Chair visitor wooden

Side unit

Pedastal with drawer

Table Peg with Glass top

Center table with Glass top

Corner Table with Glass top

Repair of under mentioned furniture items will be carried out as follows:- (a) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints. (sl No 14.01 to 16.06) (b) Work will be executed where the furniture exist in different User Units/Md accns of GE (AF) Bamrauli including BSO's Furniture Yard as directed by Engineer-in-Charge.(sl No 14.01 to 16.06) (c) All Timber shall be of 1st class seasoned hard teak wood (Shegun/ Assam teak) free from knots and cracks else specified in drg. (d) Anti-termite and anti-bug treatment shall be done before polishing the wooden items.(sl No 14.01 to 16.06) (e) Scrapping/Grinding will be carried out for renewal of existing dust, dirt, faded polish etc strictly as directed by GE/EIC, M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of existing polish making surfae smooth by sanding and grinding with standard workmanship as directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing will be directed by GE/Engr-in-Charge. (sl No 14.01 to 16.06)

CHAIR DINING

Rear legs as per drg

Front Leg as per drg

Seating Frame members front, back sides as per drg

Bottom/Centre stiffener as per drg

Back strip as per drg

CHAIR EASY,

Rear legs as per drg

Front Leg as per drg

Seating/back Frame members front, back,side rail as per drg

Arm rest as per drg

CHAIR WRITING

Rear legs as per drg

Front Leg as per drg

Seating Frame members front, back sides as per drg

Bottom/Centre stiffener as per drg

Arm rest as per drg

Back strip as per drg

REPAIRS TO ALMIRAH LARGE STEEL (FD- 1031) :-

Material and labour in replacement for lock of almirah large steel of Make : Harison, Godrej of suitable size with duplicate keys as per sample, fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge

Material and labour for repair to door shutter with denting and necessary adjustment incl whole body denting and tighting as required complete all as specified and directed by the Engineer-in-Charge

Material and labour in replacement for door shutter of almirah large steel made of 1.2 mm thick mild steel black sheet complete all as specified and shown in drawing and directed by the Engineer-in-Charge

Material and labour in replacement for handle of almirah large steel chromium plated fixed with screws, complete all as specified and shown in drawing and directed by the Engineer-in-Charge

Material and labour in replacement for leg of almirah large steel made of 1.2 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge

Material and labour in replacement for hinge of almirah large steel,mild steel, 100mm size of approved quality fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge

Material and labour in replacement for shelf of almirah large steel made of 1.2mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge

Material and labour for preparation of old / new painted steel surfaces (external and internal duly rubbing the whole almirah including intenally and existing old paint from almirah) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty and primer wherever required complete all as specified and directed by the Engineer-in-Charge.There should be atleast one day gap between every step of painting

REPAIRS TO ALMIRAH MEDIUM STEEL WITH SHELVE, FD-67M

Material and labour in replacement for lock of almirah medium steel of Make : Harison, Godrej of suitable size with duplicate keys as per sample, fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge

Material and labour for repair to door shutter with denting and necessary adjustment incl whole body denting and tighting as required complete all as specified and directed by the Engineer-in-Charge

Material and labour in replacement for door shutter of almirah medium steel made of 1.2 mm thick mild steel black sheet complete all as specified and shown in drawing and directed by the Engineer-in-Charge

Material and labour in replacement for handle of almirah medium steel chromium plated fixed with screws, complete all as specified and shown in drawing and directed by the Engineer-in-Charge

Material and labour in replacement for leg of almirah medium steel made of 1.2 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge

Material and labour in replacement for hinge of almirah medium steel,mild steel, 75mm size of approved quality fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge

Material and labour in replacement for shelf of almirah medium steel made of 1.2 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge

Material and labour for preparation of old / new painted steel surfaces (external and internal duly rubbing the whole almirah including intenally and existing old paint from almirah) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty and primer wherever required complete all as specified and directed by the Engineer-in-Charge.There should be atleast one day gap between every step of painting

Repairs to various type of executive chair with high back

Material and labour in replacement for old unserviceable steel base of chair and supply and fixing of new Steel base for Make: Godrej / durian /Methodex complete all as specified and shown in drawing and as directed

Material and labour in replacement for old unserviceable fiber base of chair and supply and fixing of new fiber base Make: Godrej / durian /Methodex complete all as specified and shown in drawing and as directed

Material and labour in replacement for old unserviceable hydrolic of chair and supply and fixing of new hydrolic Make: Godrej / durian /Methodex complete all as specified and shown in drawing and as directed

Material and labour in replacement for old unserviceable tilt mechanism of chair and supply and fixing of new tilt mechanism complete all as specified and shown in drawing and as directed

Material and labour in replacement for old unserviceable arms of chair and supply and fixing of new arms Make: Godrej / durian /Methodex complete all as specified and shown in drawing and as directed

Material and labour in replacement for old unserviceable push back of chair and supply and fixing of new push back of complete all as specified and shown in drawing and as directed.

Material and labour in replacement for old unserviceable wheel of chair and supply and fixing of new wheel of complete all as specified and shown in drawing and as directed

Material and labour in replacement for old unserviceable seat base of chair and supply and fixing of new seat base 12mm thick readymade as per existing of complete all as specified and shown in drawing and as directed

Material and labour in replacement for old unserviceable back base of chair and supply and fixing of new back base 12mm thick readymade as per existing of complete all as specified and shown in drawing and as directed

Material and labour polishing old wooden arms of chair by scrubbing and applying lacquer polish one or more coat to achive required finish complete all as specified and shown in drawing and as directed

Material and labour polishing old wooden base of chair by scrubbing and applying lacquer polish one or more coat to achive required finish of approved colour and shade

Material and labour in replacement for old cloth and cushion for seat and back of chair by taking out seat and back, changing cloth of seat and back with leather / crape or matti of not less than Rs 200/- per meter including changing / replacement of foam cushion of seat and back with 32 density foam (as approved) of required existing thickness and size including all new hardware and accessories and refixing complete all as specified and directed

Repairs to various type of chair computer:-

Material and labour in replacement for old unserviceable steel base of chair and supply and fixing of new STEEL BASE of make Feda / World Wide / Nobel complete all as specified and shown in drawing and as directed

Material and labour in replacement for old unserviceable fibre base of chair and supply and fixing of new fibre base of all as specified and shown in drawing and as directed

Material and labour in replacement for old unserviceable hydrolic of chair and supply and fixing of new hydrolic of complete all as specified and shown in drawing and as directed

Material and labour in replacement for old unserviceable tilt mechanism of chair and supply and fixing of new tilt mechanism of complete all as specified and shown in drawing and as directed

Material and labour in replacement for old unserviceable arms of chair any type and supply and fixing of new arms of PU/fibre complete all as specified and shown in drawing and as directed

Material and labour in replacement for old unserviceable push back of chair and supply and fixing of new push back of complete all as specified and shown in drawing and as directed

Material and labour in replacement for old unserviceable wheel of chair and supply and fixing of new wheel of complete all as specified and shown in drawing and as directed

Material and labour in replacement for old unserviceable seat base of chair and supply and fixing of new seat base 12mm thick readymade as per existing of complete all as specified and shown in drawing and as directed

Material and labour in replacement for old unserviceable back base of chair and supply and fixing of new back base 12mm thick readymade as per existing of complete all as specified and shown in drawing and as directed

Material and labour polishing old wooden arms of chair by scrubbing and applying lacquer polish one or more coat to achive required finish complete all as specified and shown in drawing and as directed

Material and labour for polishing old wooden base of chair by scrubbing and applying lacquer polish one or more coat of melamine to achive required finish of approved colour and shade

Material and labour in replacement for old cloth and cushion for seat and back of chair by taking out seat and back, changing cloth of seat and back with leather / crape or matti of not less than Rs 200/- per meter including changing / replacement of foam cushion of seat and back with 32 density foam (as approved) of required existing thickness and size including all new hardware and accessories and refixing complete all as specified and directed

Repairs to various type of Visitor Chair

Material and labour in replacement for old unserviceable arms of chair any type and supply and fixing of new arms of PU/fibre of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge

Material and labour in replacement for old Chromium plated steel surfaces and making Chromium plating after taking out all pipe and refitting after Chromium plating complete all as specified and shown in drawing and directed by the Engineer-in-Charge

Material and labour in replacement for old cloth and cushion for seat and back of chair by taking out seat and back, changing cloth of seat and back with leather / crape or matti of not less than Rs 200/- per meter including changing / replacement of foam cushion of seat and back with high density foam (as approved) of required existing thickness and size including all new hardware and accessories and refixing complete all as specified and shown in drawing and directed by the Engineer-in-Charge

Material and labour for polishing wooden arms of chair by scrubbing and applying melamine polish one or more coat to achive required finish complete all as specified and shown in drawing and directed by the Engineer-in-Charge

Material and labour for preparation of old / new painted steel surfaces (external and internal) in yard and painted the chair through powder coating including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge

Supply and fixing including preparation of various parts of bed hard , various type of table dining all other parts of various FD furniture articles in furniture yard as reqiured from Ist class teak wood (Shegun/ Assam teak) free from knots and well seasoned within permissible limit and as directed by Engr-In-Charge

Recanning of various types of chairs / stool with plastic cane half round 2mm wide 0.35 mm thick (4mm wide semi round for border) best quality as per Godrej pattern including removing of old cane complete all as specified and directed. Make of cane : Premier

Recanning of wooden Writing chair

Recanning of wooden Dining chair

Recanning of wooden Chair Easy

Material and labour for re-caning of chair verandah with plastic cane half round 4mm wide 0.4mm thick, best quality, as per Godrej pattern including removing of old cane complete all as specified and directed. Make of cane : Premier

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material

M/S Amar Enterprises

Mohit Enterprises

M S Enterprises

M/S SWASTIK BUILDERS

M/S vibhuti enterprises

UNIQUE FURNITURES SALES

gangotri enteriprises