Construction of 01 no E type Quarter at PHC (N) Kundheigola of Reamal Block in the district of Deogarh for the year 2025-26

Earth work in excavation of foundation in hard soil or gravelly soil including dressing and leveling the bed. initial leads and lifts as per direction of E.I.C.

Supplying & filling foundation and plinth with sand well watered and rammed including cost, cost of all labour, carriage, royalty, taxes, T&P etc complete.

Cement Concrete (1:3:6)using 40mm size hard granite C.B. metal approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C.

Fly Ash brick masonry in cement mortar (1:6) in foundation and plinth using Flyash bricks of 25x12x8 cm size having a crushing strength of not less than 50 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Cement concrete of proportion (1:2:4) using 12mm size hard granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete and compacting in layers not exceeding 15cm thick with proper packing and ramming each layer of concrete by means of vibrator including watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Reinforced cement concrete M25 with clean hard crusher broken granite chips of 20mm and down graded size of approved quality from approved quarry including hoisting, lowering and laying concrete with necessary slope and smoothness to receive tar felting or terracing, watering and curing for four weeks, centring, shuttering and finishing the exposed surface and ceiling smooth to receive white washing or painting providing grooves or beads and fan hooks as per requirement in ceiling where necessary, cost of water, including cost, conveyance, royalty taxes of all the materials and labour, T&P and cess etc. complete in all respect but excluding cost of M.S rods or Tor steel and binding wire 18 to 20 gauge and labour charges for straightening, cutting, bending and binding and tying the grills and placing in proper position as per specification and direction of the Engineer-in-charge.

Column base and footing,

Column in Superstrecture, Beam

Plinth beams

Lintels

Chajja

Roof Slab

Lofts/shelves

Stair case

Cutting, bending, binding and tying the grills and placing in proper position as per drawing and design including cost, conveyance and taxes of M.S rods and binding wire with all labour T&P and cess required for the work etc. complete in all respect in all floors(weight of binding wires will not be considered as measurement of M.S rods) as per specification and direction of the Engineer-in-charge.

Fly Ash brick masonry in cement mortar (1:6) in Superstructure using Flyash bricks of 25x12x8 cm size having a crushing strength of not less than 50 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

16mm th Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

12mm th Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Finishing surface of walls with cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials taxes, labour T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Wall priming one coat with approved primer with brush to wall surface after cleaning the surface including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Distempering two coats to inside walls etc complete of approved shade on new work to give an even shade including cost of paint etc complete.

Weather coat paint of 2coats to outside wall with any approved shade including Priming one coat with any approved (water bound) primer,cost of weather coat,labour charges,cost of materials& cost conveyance etc. Complete

Supplying and fitting-fixing of Un-plasticised poly vinyl chloride (UPVC). Casement Door - 60- Series duly manufactured using UPVC reinforced profiles of 60mmx55mmx2.5mm for outer frames, 102mmx60mmx2.25mm for casement door sash profile and 74mmx60mmx2.5mm mulion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated and welded through fushion welding the door sash shall be fitted with 12mm thick WPC board of green play make duly fixed with EPDM wheathering seal resistance accessories like clipping locking system made of aluminium 1 No per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc, including cost and conveyance of all materials, accessories , labour charges, materials and product confirming to ASTM D 638 -14, EN-477-95 and other applicable codes and standards.

Supplying fitting and fixing of two track UPVC sliding window of approved make with 6 mm thick glass of approved quality complete with frame shurrers and all fitting and fixtures.(SOR 2022 Item-12 P-235).

Supplying, fitting and fixing of M.S doors and windows shutters of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes of all materials required for the work, labour and T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Painting two coats over a coat of primer with any approved paint with brush to wood/iron work including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Providing and fixing Vitrified tiles in floors, treads of steps and landing on 20mm th bed of cement mortar (1:4) (1 cement:4 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge

Fixing of Ceramic tiles in dado skirting & risers of steps on 12 mm thick cement mortar (1:3) jonted with neat cement slury mixed with pigment to match the shade of the tiles including cost of tiles etc.complete.

Supplying fitting and fixing of Stain less steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr c/c and stain less square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge

Please Enable Macros to View BoQ information