Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.4 LAccepted-AOC 6 O YASHODA NAGAR KANPUR UP 208011 | KANPUR | KANPUR NAGAR | UTTAR PRADESH | 208011 | L1 | Accepted-AOC Accepted due to L1 | |
| 2 | L2₹9.3 L+₹1.8 L (23.5%)Rejected-Finance | L2 | Rejected-Finance Rejected due to L2 | |
| 3 | L3₹9.5 L+₹2.0 L (26.3%)Rejected-Finance | L3 | Rejected-Finance rejected due to L3 |
Tender Value
Refer Docs
EMD Value
₹20,000
Closing Date
10 Jun 2021, 6:00 pmClosed
GE
GE (I) (P) FY KANPUR
REPAIR/MAINTENANCE OF HARD STANDING , FENCING, SEWAGE LINE , SOAK PIT AT OFFICE COMPLEX, OFFICER MESS, DSC LINE,DSC QUATERS, SERVICE OFFICER MESS AND KPR OF SQAE (A) KANPUR UNDER GE (I) (P) (FY) KANPUR.
2021_MES_442602_1
8871/KAN/T-07/E8
Open Tender
Civil Works
Item Rate
180 days
GE (I) (P) FY KANPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE (I) (P) FY KANPUR
₹20,000
Yes
29 Jun 2021
13 May 2021
12 Jun 2021
13 May 2021
10 Jun 2021
27 May 2021
Amount
Thorough cleaning, flushing and activating sewage system and Material & Labour for cleaning manually (by rodding to and from with sewage steel cleaning rods) or mechanically and getting out of semi solid/ solids /sludge/sand/ silt/ foreign matters etc. deposited in under ground sewer lines any dia as well as from connection of manholes/gully traps of any section/shape/depth and removing the same to a distance exc 250 M and not exc 500 M including pumping out the sludge from blocked manholes where required after forcefully flushing the entire sewer lines/ manholes with water through water jet of hose pipe all as directed at site. (The length of sewer line shall be measured including manholes).
Material & Labour for de-silting/ desludging of septic tank by removing all sludge (in semi liquid or semi solid state) both organic and inorganic in nature by vacuum process closed tankers tractor driven and disposal of the same outside the defence land all as directed at site to the entire satisfaction of Engineer-in-Charge.
Material & Labour for complete dewatering of septic tanks, soakage well by vacuum process closed tankers tractor driven and including disposing off sewage water outside the defence land all as directed at site to the entire satisfaction of Engineer-in- Charge.
Attending day to day complaints for cleaning of localised blockage from floor/ Nahani trap, soil waste pipe, WC, chocked rain water pipe etc upto and including Ist manhole and removing sludge water/ waste upto 50m distance and burring the same in pit complete all as specified and directed.
Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar internal dia of pipe 150mm.
Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar internal dia of pipe 100mm.
Excavation in trenches n.exc 1.5 m deep & 1.5 m width and getting out in soft/loose soil.
All as per item No 7 above but exc 1.50m & n.exc 3 mtr.
All as per item No 7 above but n.exc 4.5 mtr.
Material & Labour for concrete bed for drain pipes in PCC (1:4:8) Type D-2 including packing under and haunching against the sides of pipes after they are laid & tested for 150mm bore of pipe.
All as per items No 10 but for drain pipe of 100 mm dia
M&L for 150mm bore Reinforced concrete pipes class NP2 laid in jointed complete with collars laid in trenches & jointed complete all as specified.
All as per item No 12 above but RCC pipe of 100mm dia
Dimolition of brick work built in CM, including quoins, arches etc .as directed.
M&L for brick wk with subclass B bricks straight curved om plan exc 6m mean radious bult CM (1:4) etc as directed
Material & Labour for 15 mm thick plaster in CM (1:4) finished even and smooth with out using extra cement using WPC (WPC shall be as per manufacture with measured and paid separately).
Material & Labour for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation.
Material & Labour for PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregates as in benching,coopings etc finished even and smooth using extra cement.
Material &Labour for precast RCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slab of man holes etc.
Supply & Fixing MS TMT deformed or twisted bars 6mm to 8mm dia cut to length, bent to shape required including cranking bending and binding with mild steel wire (annealed) dia not less than 0.9 mm etc complete all as specified and directed.
Supply & Fixing MS TMT deformed or twisted bars 10 mm dia & over round bars cut to length, bent to shape required including cranking bending and binding with mild steel wire (annealed) dia not less than 0.9 mm for Man hole cover handle etc complete all as specified and directed.
Cutting into existing man holes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ Section) in cement concrete 1:2:4 type B-I smooth finished and reforming benching as required internal dia of pipe 150mm.
Returning filling in including spreading leveling watering and well ramming in layers not exe 25 cm in soft/loose soil etc complete all as specified and directed.
Removing excavated materials n.exc 50 mtr and depositing where directed at a level not exc 1.5m above the starting point.
Supply only water proofing compound.
Demolition of cement concrete as in ground floors and pavings not exceeding 15 cm thick below or above ground level (unreinforced).
M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
M & L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade with pigment in floor set and jointed in neat cement surrey and point in white cement to match colored tile over40mm thick sand filling complete all as specified and directed.
M&L for 75mm thick in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protections/ path and sub base etc including necessary form work complete all as specified.
M&L for 100mm thick PCC 1 : 2 : 4 Type B-2 ( 40 mm graded stone aggregate) as in PCC Path finished with rolling and spiked rolled to surfaces making impression of expanded metal all as directed.
Dismantling fencing wire mesh ,any type complete all as specified and directed
Dismantling expanded metal ,any thickness or mesh weight n exc 4 Kg/per Sqm ,any type complete all as specified and directed
Dismantling posts or struts (wood, steel or RCC) any section ,including taking out any type embeded portion and making good disturbed ground complete all as specified and directed.
Excavating in post holes (or siimilar holes) each n exc 0.50 cum , getting out, returning filling in and ramming earth or broken ruble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50 m and making good surfaces in soft / loose soils complete all as specified and directed.
Fixing only Chain link fencing including line wires any mesh size and type to any type of standards rails, straining bolts etc including provision of binding wire complete all as specified and directed.
Supply only chain link MS galvanised fencing of any size and any type weight exc 4 Kg/sqm complete all as specified and directed.
S&F M S work in posts and struts in fencing incl cutting tops to shape as directed incl all drilling,bolting or riveting, welding etc and similar work conforming to Fe- 290 Gde E-165 complete all as specified and directed
S & F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
M&L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described over applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified and directed.
Applying two coats of cement base paint, white or tinted on newly plaster surfaces over a coat of primer including preparation of surface.
M& L for 25mm thick PCC 1:2:4 type B-1 (Using 20mm gradede crushed stone aggregate ) as in floor finishes all as specified and directed.
M&L for 15mm thick screed bed or a layer of bedding for laying of floor finishes. in cement mortar 1:6 all as specified.
M & L for coloured chequered cement concrete tiles with grey cement and pigments 250 mm x 250mm x 25mm thick , set with neat grey cement slurry ,jointed and pointed in cement slurry and pigments in floor/ paths , complete all as spd & directed .
S.D.TRADERS
M/s raj constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .