GE/ALP (8162B) KOLKATA OF 2022-23

Amount

Taking down ceiling fan of any type, any make and any sweep for repairing,opening the body and blade, checking for repalcement of unserviceable spares,cleaning, overhauling, greasing, replacement of unserviceable spare by new one, re-assembling of all components in original position, testing and hanging up the same as directed Note : New spare parts required for replacement shall be measured and paid seperately as 'Supply only" under relevant items.

Rewinding of ceiling fan, 1400 mm sweep with synthetic enamel copper wire including insulation of starter with polyster paper/manllex paper with cotton binding, heat varnished and including flexbile cable for electric connection all as directed.

Supply only ball bearing of size 6201/6202/6203

Supply only metal bush bearing suitble for ceiling fan 1200/1400 mm sweep of any type and size complete all as specefied and directed.

Supply only capacitor for ceiling fan 2.50 MFD complete all as specified and directed.

Supply only capacitor for ceiling fan 2 MFD complete all as specified and directed.

Supply only fan blade (3 Nos blade is one set) 1200 mm sweep suitable for (USHA/Havells/Bajaj make) fan and all as specified and directed.

Supply and fixing of modular stepped type electronic fan regulator 230 volt complete all as specified and as directed. (Make : Legrand or equivalent as approved by the GE)

Supply and fix as in repair of MS clamps made out of 50 x 6mm flat iron suitable for hanging of ceiling fan on pipe including necessary cutting, threading, drilling, fixing arrangement split pin, nuts, bolts washer etc as directed.

M&L in replacement of fan hooks, hold fasts for suitable for hanging of ceiling fan complete make good and all as per directed.

M&L in replacement of GI tubing 15 mm 'light grad',galvanised, with all fitting; suitable for hanging of ceiling fan as required all as per directed.

Material and labour for painting of ceiling fan complete, in situ of size 1200/1400mm sweep with with two coats of synthetic enamel white paint including preparation of old painted surfaces including writing of MES No with letters n exc 15mm height as directed by Engineer-in-Charge

Taking down exhaust fan/wall mounted of any type, any make, by opening of body carefully checking for repalcement of unserviceable spares, including replacement of spares by new one, re-assembling of all components in original position, cleaning, oiling greasing, testing and fixed in original position Note : New spare parts required for replacement shall be measured and paid seperately as 'Supply only"

S&F in repair louvers, suitable for upto 450mm mm sweep exhaust fan made of GI complete all as specified and directed.

Rewinding of exhaust fan,upto 450 mm sweep with super enamelled copper wire and insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished and all as directed.

All as per item No 15 here-in-before but for wall mounting fan 400mm sweep complete all as specified and directed by the Engr-in-Charge.

Supply only capacitor for exhaust fan 4.00 MFD complete all as specified and directed.

Material and labour for preparation of exhaust fan/wall mounting fan and applying one coat of grey synthetic enamel paint by spraying using spray gun with filling cavities including writing of MES No, taking down and refixing complete all as specified and as directed.

Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittings etc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from the site and making good all disturbed surfaces of walls, floors etc. to match to the existing surfaces.

Material and labour for point wiring for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn caping casing with all accessories suitable for modular fittings including taking down of old existing point wiring including fitting and making good the distrubed surfaces as per the existing complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No.40 here-in-before but for 3 pin 6 Amps socket outlet on the same board with 1.5 sqmm cable complete as specified and directed.

All as per item No.40 here-in-before but for 3 pin 16 Amps switch socket combination on the independent board with 1.5 sqmm cable complete as specified and directed.

All as per item No.40here-in-before but for switch socket combination 2 in 1,3 pin 5/15 Amp on independent board with 2.5 Sqmm PVC unsheathed copper cable and 1.5 sqmm copper conductor cable as earth continuity conductor complete as directed.

S & F 2 Modular socket outlet 2 in 1, 5 pin 5 Amp,230 Volts . (Make:Legrand/ Havells /C&S /PHILLIPS)

M & L for Modular switch socket combination 2 in 1, 3 pin 5 Amps, 240 V , all as specified. Make:Legrand /Havells/ C&S /PHILLIPS)

M & L in repair for Modular switch socket combination 2 in 1, 5 pin 5 Amps, 240 V, all as specified. (Make - Legrand/Havells/ C&S/ PHILLIPS)

Supply and fix Modular switch socket combination 2 in 1,15 Amps, 230 Volts, complete all as specified and as directed by the Engr-in-Charge. (Make:Legrand/Havells/ C&S/ PHILLIPS)

S&F of modular white cover plate with frame 3 Module complete all as specified and as directed. (Make legrand or equivalent as approved by the GE)

S&F in repair modular metal flush box 3 Module complete all as specified and as directed. Make:Legrand/Havells/ C&S/ PHILLIPS)

Supply and fix in repair Modular switch socket combination 2 in 1,15 Amps, 230 Volts, complete all as specified and as directed by the Engr-in-Charge. (Make : Legrand/Havells/ C&S /PHILLIPS)

S&F of modular white cover plate with frame 4 Module complete all as specified and as directed. (Make:Legrand/ Havells /C&S /PHILLIPS)

S&F of modular metal flush box 4 Module complete all as specified and as directed. (Make: Legrand/Havells/ C&S /PHILLIPS)

Supply and fixing in repair of Modular switch single pole, one way, 6 Amp, 1 module, complete all as specified and directed.

Supply & fixing as in repair of sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with one 20 Amps SP MCB 240 Volt complete all as specified and as directed.

Supply and fixing in repair of ceiling rose surface bakelite three terminal 65 x 50mm, PVC/Polycarbonate,isolated body complete all as specified and as directed by the Engr-in-Charge. (Make : Anchor Cat No 39040/3290 or equivalent as approved by the GE)

S&F as in repair bell Buzzer/Ding Dong AC. 230 volts,single pole complete all as per directed. (Make : Anchor or equivalent as approved by the GE)

S&F as in repair bell push, flush type, 5 Amp AC. 230 voltssingle pole complete all as per directed. (Make : Anchor or equivalent as approved by the GE)

Supply and fixing in repair MCB, single pole, 240 Volts, of capacity (6-32 Amps) 'C' series as ordered breaking capacity 10 KA. (Make- leagrand or equivalent as approved by the GE)

Supply and fixing in repair MCB SPN, 40 to 63 Amps, 240 Volts ,'C' series of breaking capacity 10KA complete all as directed. (Make-ABB or equivalent as approved by the GE)

Supply and fixing in repair MCB TPN, 40 to 63 Amps, 415 Volts ,'C' series of'C' series breaking capacity 10KA complete all as directed. (Make- leagrand or equivalent as approved by the GE)

M&L for taking out unserviceable DBs of any type / capacity incl MCBs for fixing of new or old all as directed

Supply and fixing as in repair MCB DB SPN (double door) 12 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed by the Engr-in-Charge.Make-ABB or equivalent grading ISI marked.Make-ABB or equivalent grading ISI marked.

Supply and fixing as in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed by the Engr-in-Charge.Make-ABB or equivalent grading ISI marked. (Make-ABB or equivalent as approved by the GE)

Supply and fixing as in repair MCB DB SPN (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed by the Engr-in-Charge. (Make-ABB or equivalent as approved by the GE)

Supply and fixing as in repair MCB DB SPN (double door) 2 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed by the Engr-in-Charge. (Make- ABB or equivalent as approved by the GE)

Supply and fixing as in repair vertical TPN MCB DB (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed suitable for MCB TPNas incomer and MCB as outgoing with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed by the Engr-in-Charge. (Make-ABB or equivalent as approved by the GE)

Supply and fixing in repair MCCB FP 160-200 Amps, 415 volts, , breaking capacity 25KA complete all as directed. (Make-L&T/Havells)

Supply & fixing in repairs main stream battens fitting LED 20 watt tube 4 feet long fixing on PVC/wooden round block complete with all accessories, prewired and flexible wire twin core from ceiling rose to terminal block all as directed. (Make:Crompton Cat Np.LCTLN-20-CDLor equivalent in other Make CG/Havells/Bajaj etc)

Supply & fixing in repair of LED 10W 3000K integrated square recessed mounted complete fitting complete with all accessories (Make:Philips Cat No.DN097B LED6S-6500 PSU WH or equivalent in other Make CG/Havells/Bajaj)

Supply & fixing in repair of LED 10W 4000K integrated square recessed mounted complete fitting complete with all accessories (Make:Philips Cat No.DN097B LED10S-6500 PSR WH WHor equivalent in other Make CG/Havells/Bajaj)

Supply & fixing in repair of LED 10W integrated circular recessed mounted complete fitting complete with all accessories (Make:Philips Cat No.DN092BLED10S-6500PSU WH or equivalent in other Make CG/Havells/Bajaj)

S &F in repair of LED high quality driver constant current ,Realiability quality& amp ,suitable for 8-15W LED existing fittings.complete with all accessories all as specified and directed by Engineer-in-charge (Make Philips/Bajaj/Havells)

S & F in repair of 18W , 2/4 pin PLS suitable for existing fitting complete with all accessories all as specified and directed by Engineer-in-charge (Make Philips/Bajaj/Havells)

S& F in repair of 2/4 pin holder suitable for existing fitting complete with all accessories all as specified and directed by Engineer-in-charge (Make Philips/Bajaj/Havells)

S&F in repair of blast suitable for 18W ,2/4 pin lamp fitting complete with all accessories all as specified and directed by Engineer-in-charge (Make Philips/Bajaj/Havells)

S&F in repair of LED 24 W,6500K, square fitting ultra slim decorative aluminiumcasted,recessed mounted square fixture in white finish with opal diffuser with all necessary connecting accessories all as specified and directed by Engineer-in-charge (Make Havells Cat No.LHEBHEP7IZ1W024 or equivalent of other make.)

S&F in repair of LED18 W,6500K, square fitting ultra slim decorative aluminiumcasted,recessed mounted square fixture in white finish with opal diffuser with all necessary connecting accessories all as specified and directed by Engineer-in-charge (Make Havells Cat No.LHEBHEP6IZ1W018 or equivalentas approved by the GE)

S &F in repair of LED with reflector for OT light of suitable wattage and colour in existing Shadowless OT light dome as specofied and directed by Engineer-in-Charge (Make :-Meditecindia/MDI)

S& F in maint of digital controller suitable for existing shadowless OT light all as specified and directed by engineer -in-Charge (Make :- Meditechindia/MDI)

S& F of SMPS suitable for existing OT Light all as specified and directed by engineer -in-Charge (Make :-Meditechindia/MDI)

S & F in repair of lid cover of suitable power for existing OT light all as specified and directed by engineer -in-Charge (Make :- Meditechindia/MDI)

S& F in repair of power cable of suitable size for vexisting OT lights all as specified and directed by engineer -in-Charge (Make :-Meditechindia/MDI)

S&F in repair of PCB in OT light all as specified and directed by engineer -in-Charge (Make :-Meditechindia/MDI)

S&F in repair of sterilizable Handle in OT light all as specified and directed by engineer -in-Charge Make :-Meditechindia/MDI. or equivalent of other make.

S&F in repair of Battery for 20 KVA UPS EP42-12 for OT light all as specified and directed by engineer -in-Charge Make :-Exide, AmronI. or equivalent of other make.

M&L for Servicing of 20 KVA UPS EP42-12 for OT light and ICU including all components which reqired for smooth fuctioning for backup power supply all as specified and directed by engineer -in-Charge

S&F In repair modular metal flush box 1 Module complete all as specified and as directed. (Make legrand or equivalent as approved by the GE)

S&F In repair modular metal flush box 2 Module complete all as specified and as directed. (Make legrand or equivalent as approved by the GE)

S&F In repair modular metal flush box 3 Module complete all as specified and as directed. (Make legrand or equivalent as approved by the GE)

S&F In repair modular metal flush box 4 Module complete all as specified and as directed. (Make legrand or equivalent as approved by the GE)

S&F In repair modular metal flush box 6 Module complete all as specified and as directed. (Make legrand or equivalent as approved by the GE)

S&F In repair modular white cover plate with frame 1 Module complete all as specified and as directed. (Make legrand or equivalent as approved by the GE)

S&F In repair modular white cover plate with frame 2 Module complete all as specified and as directed. (Make legrand or equivalent as approved by the GE)

S&F In repair modular white cover plate with frame 3 Module complete all as specified and as directed. (Make legrand or equivalent as approved by the GE)

S&F In repair modular white cover plate with frame 4 Module complete all as specified and as directed. (Make legrand or equivalent as approved by the GE)

S&F In repair modular white cover plate with frame 6 Module complete all as specified and as directed. (Make legrand or equivalent as approved by the GE)

S&F in repair of Modular fan regulator 120 W -2 Module complete all as specified and as directed. (Make legrand or equivalent as approved by the GE)

Supply and fixing in repair of sub-main wiring (surface type) for main with PVC (FR-LSH) insulated & unsheathed two runs of 4 sq mm single core multi stranded copper conductor cable, 1100 Volt grade alongwith one run of 2.5 sq mm PVC (FRLS) insulated & unsheathed copper conductor cable, 1100 Volt grade, with PVC casing & capping/conduit connected to common earth dolly as earth continuity conductor, drawn through PVC casing & capping carefully and taken down old existing aluminium sub main wiring with accessories complete all as directed by the Engr-in-Charge. Note : Two runs of 4 sqmm and one run of 2.5 sqmm cable shall constitute one unit.

Supply and fixing in repair of sub-main wiring (surface type) for main with PVC (FRLS) insulated & unsheathed two runs of 2.5 sq mm single core multi stranded copper conductor cable, 1100 Volt grade alongwith one run of 1.5 sq mm PVC (FRLS) insulated & unsheathed copper conductor cable, 1100 Volt grade, with PVC casing & capping/conduit connected to common earth dolly as earth continuity conductor, drawn through PVC casing & capping carefully and taken down old existing aluminium sub main wiring complete all as directed by the Engr-in-Charge. Note : Two runs of 2.5 sqmm and one run of 1.5 sqmm cable shall constitute one unit.

Materials and labour for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 25 x 4mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed by the Engr-in-Charge.

Taking down Existing unsv Bed Head Panel with all accessories

Supply , fixing & testing of Horizontal hospital Bed Head Panel not less than size of 1220MM X 300MM X 125MM length dual rail side extrusion, thikness 4.5 mm, Middle plate 5mm side cover 2mm, Epoxy powder coated Gas outlet BS/PB type out let, TECHNOMED type of probe DOUBLE LOCKING probe / adapter - ELECTYRO PLATED BRASS MATERIAL . IV POLE -SS GRADE 304 Dimantion -350x8 mm utility basket -SS as per HTM 2022 standard it should have provision of following items including all connections and testing after installation all as per specified and directed. MAKE : TECHNOMED Oxygen Outlets - 02 Nos. Vaccume outlets - 01 No. 05/15 multisockets modular type with switch - 05 Nos. IV stand - 01 No.

NUPUR CONSTRUCTION

SEN ELECTRIC WORKS

Globe Electricals

DK Contractor

JOY TRADING CORPORATION

TOTCO

RADHA ENTERPRISE

GOODWILL AND CO.