SITC of Portable Fire Extinguishers Water Mist Cum CASF SCBA Set and other accessories for Modernization of Firefighting System of National Science Centre Delhi

Providing, testing (including on site testing as per IS code) and installation of portable fire extinguishers confirming to IS specification formulated by Bureau of Indian Standards, CE and PESCO (PETROLEUM AND EXPLOSIVES SAFETY ORGANISATION) and/ or any other statuary body as per the guidelines issued by the Govt. of India:

Portable fire extinguishers 4.5 kg capacity CO2 Type High Pressure Portable Fire Extinguisher, filled with Co2 Gas as per IS 15222, having Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2. Discharge Time 12 Sec and Average Discharge- 95%. Applicable on Class B, C and electrically started Fire. Fire Rating - 21B, External coating of enamel spray painting and Powder Coated Handle. Valve shall be Confirming to IS 3224, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and should be PESO (Chief Controller of Explosive) APPROVED. Extinguishers confirmed to IS 15683:2006 and ISI marked

Dry Chemical Powder type trolley mounted Fire Extinguisher Cap. 25 kg. filled with Sodium Bi carbonate based (SBC) powder confirms to IS 4308 Applicable fire classes B&C, Gross Weight 64 Kg, empty Weight 39 Kg, Can Height 980mm, Diameter 300 ± 10mm, External CO2 gas Cylinder of 1 kg (PESO Approved), Discharge mechanism of EPDM Hose with SS spring of 300mm to avoid kink (3 meter long) & shut off nozzle, Discharge Time 25-30 Sec, Jet Range 6 Meters, Average Discharge is 85%, Body Construction by MIG Welding technology, Brass forged cap with Auto safety release mechanism at 20-21 kg/cm2, Internal Coating - Epoxy Powder coating, External Coating - Pure Polyester Powder coating (UV Resistant). Sheet metal thickness: 3.15 mm. The dome end of body to be dished outwards. The discharge is to be from Wheel type Valve made of forged Brass as per IS 3224:2002 having valve inlet and outlet to meet the cylinder neck threads. The extinguisher is to be fitted with the safety valve inbuilt with the cap as per requirement of IS 10658. The valve to be set to release pressure of 20-21 Kg/cm2. The body, Cap and discharge connections are to be hydraulically tested taking into account the working applications of the same. A Dial type Pressure gauge is to be attached to the top dish of the body for inspecting the inbuilt pressure during the inspection. The discharge connection is to be lever controlled for obtaining the satisfactory performance and suitability. With Discharge Nozzle, Discharge Hose Pipe (length 3meter for 25 Kg) Confirms to IS 10658:1999, ISI & CE MARKED.

6 kg Clean Agent Fire Extinguisher filled with UL listed & FM Approved FE-36(HFC-236 fa)/ HCFC 123 gas. Electrically nonconductive non corrosive, colorless and non-residual gas, Applicable for Classes A, B, C, and electrical fires, Discharge Time 22 Sec, Controllable discharge mechanism, Jet Range 2 to 4 Meters, Average Discharge is 95%, Deep Drawn with MIG Welding technology, EPDM Rubber Hose with Special Aluminum Discharge Nozzle, External Coting Pure Polyester Powder (UV resistant), Internal Coating Epoxy Polyester Powder, CE Mark Valve with Safety Release Provision & Safety pin is of SS material, Helium Leak Detection Tested, Fire rating 1A : 21B (Factory tested as per UL rating of 2A: 10B:C), FE-36 having zero ozone depletion potential, and Welding Procedure approved by TPI with 6 G certification. Confirms to IS 15683, ISI & CE marked.

Water Type (Gas Cartridge) Portable Fire Extinguisher(9 Litre capacity) Having water as Media of extinguishing, Capacity- 9.0 ± 0.5 litre, Shape of the body- Cylindrical, Outside diameter 175± 5 mm, Syphon tube and strainer- Syphon tube with strainer shall be fitted at free end inside the body, Material of construction of body- Mild steel with minimum grade D of IS 513, Material of construction of Syphon tube- Stainless steel tube (as per IS 6913), Material of construction of Cartridge holder, knob, discharge fitting , piercer & plunger- Stainless steel as per IS 6528, Material of spring- Spring steel wire (Grade 1 as per IS 4455(part 1), Hose dimension- Shall be of not less than 8 mm bore and length not less than 600mm, Hose quality- Braided rubber with minmum bursting pressure of 40 Kgf/cm2, Size of Gas cartridge- 60 gm as per IS 4947, Carbon di-oxide Shall be moisture free and 99% pure and shall conform to the requirement of IS 15222, Performance requirement of gas- cartridge Shall be subjected to internal pressure of 250 Kgf/cm2 for minimum period of 1 minut, Throw Distance - Not less than 6 Meter for minimum period of 60 seconds provided that at least 95% of water is discharged within maximum 120 seconds, Body Colour- Fire Red or Post Office Red, conforming to Shades No. 536 or 538 of IS 5. The extinguishers shall be tested at Hydraulic test pressure of 3.0MN/cm2 (30kgf/cm2 ) for a period of 2 minutes. All confirming ti IS:940 (latest amendment).

9 ltr. Mechanical foam cartridges operated (60 gm as per IS 4947 ISI mark) filled with AFFFF foam solution 6 % (as per IS 4989 ISI mark) controllable discharge mechanism applicable on class a fire rating 3A & class B fire rating 21B. ISI mark complete with all accessories as per is:15683

Supply, installation, testing, commissioning and training of WATER MIST-CUM-CAFS (Compressed Air Foam System) PORTABLE FIRE FIGHTING SYSTEM OF 10 LITRES CAPACITY. All as per technical detailed specification given in Annexure-D

Supply, installation, testing , commissioning and training of Carbon Composite Self Contained Compressed Air Open Circuit Breathing Apparatus (SCBA Set). All as per technical detailed specification given in Annexure-D

Supply of following firefighting equipments:

Providing and fixing standard fire man's axeaxe with heavy duty insulated rubber handle. as per IS926:1985

Gloves (Heat Resistant) : High Heat Resistant Hand Gloves made from DuPont Kevlar for Palm and fingers and rest of Leather size 18”with inside woollen lining CE Marked / Certified to meet performance requirements of standard EN-659

Rope 14 mm dia x 30.5 mtr. Long polymide Anchorage Rope with one side loop and other side stop KN with sealed end. (Make: Karam)

Fire Man Helmet as per specification given in Annexure -4 as per IS : 2745 - 1983 (Reaffirmed 2010 )

Versatile Portable and Compact Rescue Stretcher: Portable and Compact Rescue Stretcher with heavy duty aluminium poles for easy handling and heavy duty, vinyl-coated nylon covers that resist stains, blood and body fluids. Non-slip handgrips help EMTs keep a firm grasp on the stretchers Features • Folds lengthwise and crosswise for compact storage. • Rugged spreader bars and legs that provide support and control. • Durable vinyl-coated nylon cover retains and absorbs body fluid. • Size : 205 x 53 x 13 cm (open) • Size : 102 x 17 x 8 cm (Folded) • Self weight: 4.8 kgs. • Gross weight: 5.5 kgs. • Load limit: 159 kgs

IMPORTANT NOTE: 1. LIST OF APPROVED MANUFACTURER: AS PER NIT. 2. SCOPE: SUPPLY, INSTALLATION, TESTING COMMISSIONING, TRAINING AND ONSITE WARRANTY. 3. WARRANTY: 2 YEARS FOR ALL EQUIPMENTS

fire Equi.02

fire Equi.03

fire Equi.04

fire Equi.05

fire Equi. 06

fire Equi.07

fire Equi.09

fire Equi.10

fire Equi. 11

fire Equi.12

fire Equi.13