Loading
Loading…
Loading…
Tender Value
₹5.8 Cr
EMD Value
₹4.4 L
Closing Date
16 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SRDSTEC
13 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' which ever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years,ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange,incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
23 conditions · 13 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Covering letter duly filled by the tenderer to be submitted on their letter head as per Section 4.2 Part-I of STD-2022
A copy of Authorization/Power of Attorney issued by the sole proprietor/partnership firm/LLP/ Society/JV/Company in favour of the individual to sign the tender on behalf of the sole proprietor/partnership firm/LLP/ Society/JV/company as per Annexure Section 4.4 of STD-2022 Part-I. In case of company power of attorney must be backed by the resolution of Board of Directors and create liability against the company.
Details of Plant and Machinery already available with the firm must be uploaded as per Annexure-IX of STD-2022
List of engineers/personnel already available/ proposed to be employed for deployment on this work must be uploaded as per Annexure-X of STD-2022
Details of Beneficiary for Electronic Transfer of Funds must be uploaded as per Annexure-XII of STD-2022
An undertaking by sole proprietor firm/all partners of the partnership firm/Power of attorney holder if company (as per Annexure-B/C uploaded with STD-2022)or LLP or Society/JV that he/they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 (Part-II) of the General Conditions of Contract (as per Annexure- B/C uploaded with STD-2022). (Detail instructions/condition may be seen on Tender Document)
Please submit the copy of the registration certificate of firm, PAN, GSTIN (if applicable)etc.
Tenderes are compulsorily required to upload undertaking (attached as Annexure-A uploaded with STD-2022) regarding Employment /Partnership of Retired Railway Employees attached as Annexure'A'. Otherwise the tenderer will give full information as to the date of retirement of such Engineer or gazetted officer from the said service and as to whether permission for taking such contract, or if the Contractor be a partnership firm or an incorporated company, to become a partner or director as the case may be, has been obtained by the tenderer or the Engineer or officer, as the case may be from the President of India or any officer, duly authorized by him in this behalf, shall be clearly stated in writing at the time of submitting the tender. Note:- Tenders without undertaking or required information shall be summarily REJECTED.
The tenderer shall clearly specify whether the tender is submitted on his own or on behalf of a partnership firm/Company/Joint Venture (JV) /Registered Society/ Registered Trust/HUF etc. The Tenderer (s) who is/ are constituents of firm, company, Association or Society shall enclose self-attested copies of the constitution of their concern, Partnership Deed, copy of PAN Card and Power of Attorney along with their tender. Tender Documents in such cases shall to be signed by such persons as may be legally competent to sign them on behalf of the firm, Company, Association, Trust or Society, as the case may be. Following documents shall be submitted by the tenderer: (a)Sole proprietor Firm: (i) Affidavit of sole proprietorship firm. (ii) All documents in terms of explanatory notes in clause 3.5 PART-I of STD-2022 (b) HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of explanatory notes in clause 3.5 PART-I of STD-2022. (c) Partnership firm, as per Tender Form-2 (Annexure-I) Para 18.10 PART-I of STD-2022: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) All other documents in terms of TENDER FORM -2 of STD-2022 (d) Company registered under Companies Act 2013: (i) The copies of MOA (Memorandum of Association)/AOA (Articles of Association) of the company. (ii) A copy of Certificate of Incorporation. (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms of explanatory notes in clause 3.5 PART-I of STD2022 (e) Limited Liability Society: (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation of LLP. (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender/MoU/JV on behalf of the LLP and create liability against the LLP. (iv) All other documents in terms of explanatory notes in clause 3.5 PART-I of STD2022 (f) Registered Society & Registered Trust: (i) A copy of the Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society. (v) All other documents in terms of explanatory notes in clause 3.5 PART-I of STD-2022 (g) Joint Venture: All documents as specified under Para 3.7.7 PART-I of STD-2022
No post tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suomoto post tender letters of the tenders shall be treated as NULL & Void as per Para 4.6 of STD- 2022
This tender will govern under "Indian Railway Standard General Condition of contract - 2022 or latest. Tenderers are requested to read GCC and tender document very carefully before submitting their Bid.
Performance Guarantee- The successful bidder shall submit PG as per procedure Mentioned in clause 5.1A of Northern Railway standard Tender Document 2022, The successful bidder shall submit the performance Guarantee(PG) amounting to 5% of the contract value for all the tenders issued
The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self-attested/digitally signed by the tenderer or authorized representative of the tendering firm. Self attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "documents supporting the claim of qualifying the laid down eligibility criteria", will be considered for evaluating his/their tender
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway there under.
Undertakings by Partnership Firm- In case the Letter of Acceptance (LOA) is issued to a partnership firm, the undertakings as per clause 18.10 of Annexure -VIII of Northern Railway Standard Tender Document 2022 shall be furnished by all the partners through a notarized affidavit, before signing of contract agreement.
As per Railway board letter No. 2018/CE-1/CT/4 dt. 17.10.2018 contractor shall mandatorily update the labour data on Railway Sharmik kalyan portal on monthly basis. The detailed guidelines are given in Clause 5.4 of PART-I of Standard Tender Document- 2022.
S&T work i.c.w Improvement of earthing arrangements over MB division .
SNT-Earthing-Improvement
SNT-Earthing-Improvement
Open
Works - General
12 Months
Moradabad, Uttar Pradesh
₹0
₹4.4 L
16 Mar 2026
20 Feb 2026
2 Mar 2026
73 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 5,79,83,080.3 | ||
| — | 250.00 | — | — | ||
| Supply of basic material to construct Maintenance Free Earth for Ring Earth consisting as per Specification No. RDSO/SPN/197/2016 Ver 1.0 or latest, bonding connections drawing no. SDO/RDSO/E&B/002. (a) Copper bonded steel electrodes of 3.0 m long, 17.0mm dia. minimum with copper bonding thickness of min 250micron and UL listed and marked-1 No. (b) Earth Enhancement compound of RDSO approved brand supplied in sealed bags of min 30-35 Kg- 1 Nos. (c ) Copper Strip of 200mm x 25mm x 6mm to exothermically welded to Earth electrode- 1no.(d) Copper Strip of300mm x 25mm x 6mm (MEEB) -1no.(e) Copper Strip of 150mm x25mm x 6mm (SEEB)- 1no. Inspection by RDSO | — | — | — | 31,57,515 | |
| — | 250.00 | — | — | ||
| Installation of Single Maintenance Free Earth pit as per RDSO Drawing No. SDO/RDSO/E&B/001 annexure-ll of RDSO STS/E/TAN/3006 Ver 3.1 dated 25.06.2025 or latest which includes the following:-a)Digging/Auguring/Boring of single earth pit of 100mm to 125mm dia. to the depth of approx.3 meter. b) Insertion of 3.0 meter electrode and penetrating it minimum 150 mm by pushing gently with sledge hammer where the natural soil is assumed. (c) Filling of earth pit with Earth Enhancement Compound (EEC) in slurry form and backfilling. (d) Carrying out exothermic weld connection on single earth electrode to a copper tape of 200 x 25 x 6 mm.(e) Carrying out exothermic weld connection on the copper tape of 200 x 25 x 6 mm on Earth Electrode for connecting four 35 Sq. mm cables for redundancy. (f) Installation includes exothermic welding for bonding the earth system as per STS/E/TAN/3006 (g) Installation also includes supply of the earth pit chamber of dimension300 x 300 x 300 mm of RCC with 50mm thick and fine finish, Inspection chamber should be as per IEC62561-5 or latest. The top RCC cover size shall be 400mmX400mmX50mm. The date of testing and earth resistance value shall be written on the cover with black base with yellow paint. Installation to be done as per STS/E/TAN/3006 Ver 3.1; Dated: 25.06.2025 or latest by OEM only. OEM certificate & warranty certificate (for 60 months from date of commissioning) shall be submit after the installation of earthing & bonding system. Inspection by site engineer. | — | — | — | 15,00,910 | |
| — | 4500.00 | — | — | ||
| Supply of 35 Sq. mm PVC insulated Single core Multi strands copper conductor (Red/Black/Green) as perIS:694/2010 or latest, as per Specification No. IRS:S-76/89 or latest. Colour of the wire which is required will be specified by the Engineer in-charge. Inspection by RDSO. | — | — | — | 12,05,910 | |
| — | 1125.00 | — | — | ||
| : Digging a trench to a depth of at least 0.5 meter and run the four 35 sq. mm earth conductor (procured against supply item) from Earth pit to MEEB. Routing and exothermic termination of four 35 sq. mm earth conductors in trench from earth pit to 300 x25 x 6mm MEEB, which is to be fixed inside the equipment room with two 60mm insulation studs. Inspection by Site engineer | — | — | — | 1,03,207.5 | |
| — | 6000.00 | — | — | ||
| : Supply of 10 Sq. mm PVC insulated Single core Multi strands copper conductor (Red/Black/Green) as per IS:694/2010 or latest, as per Specification No. IRS:S-76/89or latest. Colour of the wire which is required will be specified by the Engineer in-charge. Inspection by RDSO. | — | — | — | 6,85,800 | |
| — | 6000.00 | — | — | ||
| : Routing and connecting all the equipment in the equipment/relay room to SEEB with 10 sq. mm copper cable using copper lugs with stainless steel nut and bolts and fixtures. The work includes laying and routing the copper cable in PVC / conduits and fixing them on wall. Inspection by Site engineer. | — | — | — | 3,52,260 | |
| — | 2000.00 | — | — | ||
| Supply of 16 Sq. mm PVC insulated Single core Multi strands copper conductor (Red/Black/Green) as perIS:694/2010 or latest, as per Specification No. IRS:S-76/89 or latest. Colour of the wire which is required will be specified by the Engineer in-charge. Inspection by RDSO. | — | — | — | 3,14,960 | |
| — | 200.00 | — | — | ||
| Supply of Main Equipotential earth bus bar (MEEB) Copper of size-300x25x6 mm Inspection byRDSO. | — | — | — | 1,51,396 | |
| — | 6000.00 | — | — | ||
| Supply of 50 mm x 6 mm (GI Strip) Galvanised steel tape for inter connecting the earth pits. Inspection by RDSO. | — | — | — | 33,49,680 | |
| — | 6000.00 | — | — | ||
| Digging a trench to a minimum depth of 0.5 meter and laying50x6 mm bare Galvanized steel tape (Interconnecting tape) connecting all the earth pits. Routing and laying 50x6 mm Galvanized steel tape connecting all the earth pits. Carrying out exothermic weld connections on all the earth electrodes to Galvanized steel tape of size 50x6mm for interconnecting the earth pits. It shall be ensured that the distance between any two earth electrodes shall be minimum 3 meter (length of the earth electrode) and max up to 6 meter(twice the length of the earth electrode) to avoid mutual resistance effects. This interconnecting tape shall also be covered with approximately 30 Kg of earth enhancing compound for each 3 meters length. Earth enhancement compound 10Kg along each meter also to be spreaded along the Galvanized steel tape. Inspection by Site engineer | — | — | — | 5,50,440 | |
| — | 3500.00 | — | — | ||
| : Supply of Exothermic welding materials (Cad weld or similar). Inspection by RDSO. | — | — | — | 56,00,000 | |
| — | 3500.00 | — | — | ||
| Carrying out exothermic welding for various conductors as per requirement. Inspection by Site engineer. | — | — | — | 12,25,000 | |
| — | 8000.00 | — | — | ||
| Supply of 25mm x 2 mm bare copper strips in the equipment room. Inspection by RDSO. | — | — | — | 1,00,78,000 | |
| — | 8000.00 | — | — | ||
| Routing and termination of 25x2mm Copper tape/8 mm solid copper round conductor which is to be fixed inside the equipment room with 60mm, 6KVA insulation studs including supply of insulation studs. The separation of the two successive insulation stud should be 600mm apart. Inspection by Site engineer | — | — | — | 7,33,920 | |
| — | 18000.00 | — | — | ||
| Supply of earth enhancement material for treatment of earth pits as per Specification No. RDSO/SPN/197/2016 Ver 1.0 or latest. Inspection by RDSO | — | — | — | 25,15,320 | |
| — | 5000.00 | — | — | ||
| Earth work for excavation and refilling around location boxes and signals etc. where necessary including 50M lead and 1.5M lift. The lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. The earth work should be well rammed including breaking of clods, levelling and dressing etc. as per instruction of Engr. at site. Inspection by Site engineer. | — | — | — | 8,18,100 | |
| — | 1000.00 | — | — | ||
| : Engaging mechanical excavators like JCB or other machineries for regarding and levelling the formation, Dismantling any infringing structures, clearing and removing debris etc., with all lead and lifts etc., complete and as per the instruction of railway representative at site. Inspection by Site engineer. | — | — | — | 10,66,790 | |
| — | 1200.00 | — | — | ||
| Brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. All material is to be supplied by the contractor. Inspection by Site engineer. | — | — | — | 31,73,328 | |
| — | 1000.00 | — | — | ||
| Cement Concrete of proportion 1:3:6 (Cement: Sand: Stone chips of 25mm nominal size) for miscellaneous items. It includes excavation, ramming of CC by using vibrator, curing and plastering with cement and sand mixture (aggregate will not exceed beyond 3.8 cm). Note: All materials required for foundation are to be supplied by the contractor. Inspection by Site engineer. | — | — | — | 35,66,480 | |
| — | 600.00 | — | — | ||
| Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/10 sqm) (Painting & writing work). Inspection by Site engineer. | — | — | — | 92,532 | |
| — | 9000.00 | — | — | ||
| : Supply of PVC conduit pipe rigid plain ended conduit size 1 inch(25 mm) IS:9537(part-3) and 9537 (Part-1) 1980 with latest amendment ISI marked with minimum 1.2 mm wall thickness &one socket at every 3 meter pipe. Inspection by Consignee. | — | — | — | 2,21,760 | |
| — | 300.00 | — | — | ||
| : Conventional earth:- Supply and installation of earth electrodes as per std. practice. The item includes digging of pit in earth, 3 Mtrs. deep and fixing earth electrode pipe. Casting of cement concrete enclosures as per drg. No. (NR/S&T/CON/6.4/97). The soil treatment shall be done as per std. practice. The item includes provn. of mild steel flat of size 35mm x 6mm (as per IRSEM) and nut bolted connection of MS flat with earth electrode. The other end of mild steel flat to be connected to block instrument, cable sheath of power equipment, signal base, apparatus case, CT rack / relay racks, other equipments as per the instruction of Engr. at site & IRSEM. Earthing connection location to location shall be done through cable which shall be provided by Railway. Complete materials such as earth electrodes as per drg. No. (NR/S&T/CON/6. 3/97), cement, wiring material, nut bolt for connection & mild steel flat of size 35mm x 6mm or 210 sqm as per SEM etc. to be supplied by the contractor. Inspection by RITES. | — | — | — | 9,05,088 | |
| — | 125.00 | — | — | ||
| Supply of single spike air terminals of 17.2 mm dia. & 2000 mm length as required and as per site conditions. The air terminal shall be manufactured with Copper Bonded Steel & shall be as per IEC 62561-2. The air terminal shall be fixed with concrete base arrangement." Inspection by RDSO. | — | — | — | 6,25,000 | |
| — | 3000.00 | — | — | ||
| Down Conductor. (i)Supply of 8 mm dia Copper Bonded Steel round conductor (250Micron) for Down conductors to be installed on vertical wall, facade of Masonary / glass /metallic work. It shall meet the requirements of IEC 62561-2. Inspection by RDSO. | — | — | — | 12,62,520 | |
| — | 2500.00 | — | — | ||
| Supply of Down Conductor holder for holding of 8 mm dia. round conductor (for RCC wall). The conductor holder shall be of Stainless steel which is mounted on plastic base support and shall meet the requirements of IEC 62561-4.It should be installed at every 1 mtr. " Inspection by RDSO. | — | — | — | 8,54,175 | |
| — | 250.00 | — | — | ||
| : Down Conductor. (iii)Supply of Test Clamp to disconnect the down conductor from the earth termination network for regular checks of the earth termination resistance value which shall be of Stainless steel and suitable for connecting 8 mm aluminium round conductor to 25x2mm Copper conductor (with enclosure). It shall meet the requirements of IEC 62561-2. Inspection by RDSO. | — | — | — | 3,28,125 | |
| — | 125.00 | — | — | ||
| Supply of Digital Lightning Strike counter Model: JMV/DLSC-3D or better for counting the number of lightning strikes and has a 3 Digit display facility and also records date and time. The Counter should be mounted on the Down Conductor. The Lightning Counter should be IP 67 rated enclosure suitable for external application. It shall meet the requirements of IEC 62561-6. Inspection by RDSO. | — | — | — | 28,12,500 | |
| — | 500.00 | — | — | ||
| Supply installation of 2DT Exothermic joint Between 25 x 2mm Horizontally laid Copper Strip to 25 x 2mm Horizontally laid Copper Strip with UL Tested. Inspection by RDSO. | — | — | — | 8,96,670 | |
| — | 125.00 | — | — | ||
| "Supply & Installation of Isolating spark Gap for lightning equipotential bonding of different earth grids according to IEC 62561 part-3 at 100kA impulse current, IP 68, fire retardant enclosure." Inspection by RDSO. | — | — | — | 3,50,000 | |
| — | 1300.00 | — | — | ||
| Supply & spreading of Ballast/Gravel Inspection by Consignee. | — | — | — | 23,34,306 | |
| — | 2000.00 | — | — | ||
| Routing and connecting of all the SPDs in the equipment room/SEEB to MEEB with 16 sq.mm copper cable using copper lugs with stainless steel nut and bolts. Inspection by Site engineer | — | — | — | 99,520 | |
| — | 20.00 | — | — | ||
| EMI/ Earthing arrangements to achieve earth value less than 1 Ohm (minimum 8 maintenance free earth) for EI at central location or end Goomties for object controllers as per RDSO specification as required for the EI system as per Rly. Br.letter No.2010/Sig/SGF/EI dated 22.06.2011 or latest shall be followed. All materials shall be supplied by the contractor including Maintenance free Earthing. Inspection by RDSO. | — | — | — | 50,16,228.8 | |
| — | 400.00 | — | — | ||
| Improvement of earth resistance values to the existing conventional Earths by adding chemicals with alternate layers of 10kgs-charcoal and 10kgs-common salt as per instructions of Engineer in-charge. All men and materials shall be arranged by the contractor" Inspection by Site engineer | — | — | — | 3,17,504 | |
| — | 500.00 | — | — | ||
| : Provision of RCC earth pit hollow box of size 300 mm x 300 mm x 300mm with 50 mm wall thickness as per Drg. no. SDO/RDSO/E&B/001 by using M20 Grade precast RCC. It includes fixing of earth pits at various locations (All the required men, material and transportation are to be arranged by contractor) Inspection by Consignee | — | — | — | 3,23,840 | |
| — | 500.00 | — | — | ||
| Supply and Erection of RCC precast slabs with hook to cover Earth pits of dimensions as as per Drg. no. SDO/RDSO/E&B/001 by using M20 Grade precast RCC. All the required materials for this work i.e. stones, cement, iron and sand etc. are to be supplied by contractor.) Inspection by consignee | — | — | — | 68,640 | |
| — | 125.00 | — | — | ||
| Installation of Class A device on the top of the building. The device shall be installed at a height of about 3 mtrs. From the roof of the building using a GI mast. The device shall be connected to the Earth pit using the down conductor or similar. This down conductor shall be run firmly along the side of the mast with the help of the spacers. It shall also be ensured that this down conductor shall not touch the building throughout. The down conductor shall be connected to the earth Electrode using Exothermic Welding. A counter shall be installed at an appropriate place to count the number of occurrences. All the accessories like spacers, welding materials etc. required for the installation shall be arranged by the contractor only Inspection by Site engineer | — | — | — | 13,25,655 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
earthingTD_merged1_compressed1.pdf earthind td
ATTACHMENT
AnnexureA.pdf
ATTACHMENT
GCCwithcorrection.pdf
ATTACHMENT
STD-2022withAmndt.pdf
ATTACHMENT
Annexure-B.pdf
ATTACHMENT
Annexure-C.pdf
ATTACHMENT
earthingTD_merged1_compressed1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .