Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.2 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹22.9 L+₹2.1 L (9.98%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹33.1 L+₹12.3 L (59.2%)Rejected-Finance RZ 55 1ST FLOOR MOHAN NAGAR PANKHA ROAD NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L3 | Rejected-Finance Rejected |
Tender Value
₹41.9 L
EMD Value
₹84,000
Closing Date
30 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Subroto Park
GE AF Subroto Park c o 56 APO
WELCOME MAINT FOR OFFICERS MARRIED ACCOMMODATION AND OMQ SPE AREA OF CAMERO COMPLEX AT SUBROTO PARK
2022_MES_543380_1
GE/SP/ TOKEN-57/2021-22
Open Tender
Civil Works
Item Rate
180 days
Subroto Park Delhi Cantt
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE AF Subroto Park
₹84,000
Yes
16 Sept 2022
4 Aug 2022
6 Sept 2022
4 Aug 2022
30 Aug 2022
18 Aug 2022
Amount
Taking down steel tubing or removing from site of 15mm bore pipe all as specified and directed by Engineer-in-charge.
All as item No 1 above but 20mm bore.
Dismantling existing tanks capacity exc. 250 ltr but n.exc 500 ltr,and removing.
Dismantling existing tanks capacity exc. 500 ltr but n.exc 1000 ltr,and removing.
Demolition of brick work built in CM incl all quoins, pillars etc but excl ashlar facings, dressed stone work and precast concrete complete all as specified and directed by Engr-in-charge.
Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. raking out joints ,hacking for key and scrubbing down with water upto 4 storeys building complete all as specified.
Taking down frame or Chowkhats with shutters (without taking off shutters from the frames) of any description not exc. 1.50 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and as directed by Engineer-in-Charge.
Taking down Door shutter of any description exc. 1.0 Sqm but n exc 2.0 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and directed.
Taking down of old /unserviceable kitchen cabinet / Cupboard incl all fixture and fittings. Note :- For measurement superficial area in elevation will be measured only.
M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement upto 4 storeys building with water proofing compound complete all as directed and specified.
M&L for 15 mm thick cement plaster in cement mortar 1:6 on Bk surfaces on fair face of brick work and finished even and smooth w/o using extra cement complete all as specified and directed by Engr-in-charge.
M&L for 10 mm thick cement plaster in cement mortar 1:3 on concrete or brick surface and finished even and smooth w/o using extra cement as in ceiling complete all as specified and directed
M&L for preparing surfaces of new plaster on walls and applying two coats of cement base paint Over a coat of alkali resitant primer complete all as specified .
M&L for preparation of new surface and applying two coat of white wash on ceiling all as specified and directed.
M&L for preparation of new surface and applying two coats of distemper on wall complete all as specified and directed.
M&L for brick work with subclass B bricks, straight or curved on plan to any radius built in CM 1:6 all as specified
S&F tripple layers rotational moulded vertical water storage tanks with closed tops ( cylinderical ) fixhoisted and in position 500 ltr capacity incl disconnecting and refixing the existing GI fitting and pipe complete
S&F triple layers 1000 ltr rotational moulded polythene water storage tank (cylinderical vertical with closed top) white in colour hoisted and fixed in position all as specified in SSR Part-I
S&F in repairs of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified.
S&F 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.
All as per item No 20 above but 20mm bore
S&F in repairs long body bib taps, cast copper alloy, fancy type with crutchor butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15mm bore.
S&F in repairs angle valve ,stop valve, cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type) with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore.
S & F in repairs fancy type 15mm dia Brass CP wall mixer/basin hole mixer/sink mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed
M&L for Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floors/wall etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over 15 mm thick screed bead in CM 1:4, including dismantling of tiles complete all as specified and directed by Engr-in-Charge.
M&L for vitrified coloured ceramic tiles, 10mm thick (Square/rectangular) area of each tile n.exceeding 0.36 sqm in floors/wall etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over 15 mm thick screed bead in CM 1:4, and including dismantling of tiles complete all as specified and directed by Engr-in-Charge.
M & L for Glazed ceramic coloured tiles of size 350x 250x 7mm/ 450X 350X 7 thick on vertical surface such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles and including 10 mm thick backing coat in CM (1:4) including dismantling of tiles complete all as specified and directed by Engr-in-Charge.
M&L for 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of stone slab complete all as specified and directed by Engr-in-charge.
S&F in repairs vitreous china wash hand basin of size 550mm x 400mm white, flat back including angle iron brackets with two coats of synthetic enamel paints including PVC waste pipe of 32mm dia of suitable length, PVC connection of 15mm dia & 450mm long with PTMT nuts, and 32mm dia brass waste fitting complete all as specified.
S&F in repair vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, ‘P’ trap 110mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge.
S&F in repairs viterious china wash down water closet pan (Pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe)incl P or S trap etc all as specified.
S&F in repair PVC flushing cistern of 10 ltr capacity valveless, symphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including flush pipe of 32mm bore PVC and connection to pipes etc and taking down existing flushing cistern complete all as specified and as directed by Engineer-in-Charge.
S&F of plastic water closet seat, white, closed pattern with flat bottom and seat cover and mild steel chromium plated or aluminised hinging device
S&F in repairs PVC cabinet mirror of size 470 mm x 570 mm x 120mm complete all specified and directed by Engr-in-Charge.
S & F in repair hand shower( health faucet ) with 1.0 m long tube and hook of Make-BEA-40S of Prayag or GEM/Jaquar complete all as specified and directed.
S&F in repair chromium plated shower rose 125mm size with or without swivel joint and fixed for 15mm bore pipe.
S&F in repair 40mm bore PTMT sink waste coupling fixed to waste pipe and wash hand basin complete all as specified and as directed by Engineer-in-Charge.
M&L for complete removal of existing treatment by scrapping down completely on brick wall/concrete surafces thoroughly.
M&L for providing and applying wall care putty of 1mm thickness over plastered surface/concrete surface to prepare the surface even and smooth complete all as specified and directed by Engr-in-Charge
M&L for prepration of old plastered or unplastered surfaces of walls and applying one coat of approved shade of oil emulsion distemper, including repairing of pot holes and cracks with putty,complete all as specified and directed by Engr-in-Charge.
M&L for prepration of old plastered or unplastered surfaces of walls and applying two coats of approved shade of oil emulsion distemper, complete all as specified and directed by Engr-in-Charge.
M&L for prepration of old plastered or unplastered surfaces of ceiling and applying one coat of approved shade of oil emulsion distemper, complete all as specified and directed by Engr-in-Charge.
M&L for providing and applying 5 mm thick on average POP (plaster of paris) punning on walls/ceiling over plastered surface/concrete surface to prepare the surface even and smooth, complete all as specified and directed by Engr-in-Charge
M&L for prepration of old plastered or unplastered surfaces of walls and applying two coat of approved shade of plastic emulsion paint over a coat of primers, complete all as specified and directed by Engr-in-Charge.
M&L for prepation of old painted wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel Paint, complete all as specified and directed by Engr-in-Charge.
S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides, including preparaion of surface and applying two coats of synthetic enamel paint over one coat of pink primer complete as specified and as directed.
S&F Ist class soft glazed and skeleton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/ wire cloth incl galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture .18mm and including applying two coats of synthetic enamel paint over one coat of pink primer complete as specified and as directed.
M&L for prepation of new wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel Paint, complete all as specified and directed by Engr-in-Charge.
Material & Labour for prepration of old plastered or unplastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, complete all as specified.
S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, complete all as specified and directed by Engr -in-Charge
S&F windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed shutter with 4.0mm thick glass, mesh shutter with 32 gauge stainless steel mesh, 6mmx12mm flat iron with 10mm square bar M.S. grill and all fitting, fixtures accessories complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(4000 series), complete all as specified and direted by Engr-in-Charge. Note : (i) Glazed shutter with 4.00mm thick glass, Mesh shutter with 32 gauge stainless mesh and M.S. grill as per Note above mentioned drawing deemed to be inclusive in the rate quoted for unit. (ii) Glass, stainless steel mesh will be fixed to window by authorised rep of manufacture of window only. (iii) Including 2 coats of synthetic enamel paint over a coat of red oxide complete.
S&F in repairs factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.One side prelam and other side plain 18mm thick Celuka PVC ply for kitchen cabinet and cupboards shutter and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.
S&F in repairs factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.
S&F in repairs factory made 5mm thik PVC sheet of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 5mm thick PVC sheet paneling for back side(wall side) and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.
S&F 100mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed
S&F 150mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed
S&F 250mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed
S&F 100mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11
S&F 100mm long Brass handles, cast type, polished bright
S&F 150mm long Brass handles, cast type, polished bright
Hacking out old broken glass (any thickness size,quility or description all as specified.
S&F 4mm thick Figured glass, pinhead type with oil putty in squares n exc 0.5 sq. m each pan complete all as specified and directed by Engr-in-charge.
S&F continous piano hinges, mild steel, bright finish or electrogalvanised of width of flap 30mm
M &L for 125 mm magnetic catches with brass body and striking plate including letting in and fixed.
S&F of 125 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws
S&F in repair 25mm dia Harrison rails, Anodised Almn alloy, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed at site
S & F in repair corner glass shelf with bracket of Make-BEA-46 of Prayag /GEM/Marc complete all as specified and directed.
S & F in repair front glass shelf with bracket of Make-BEA-46 of Prayag/ GEM/Marc complete all as specified and directed.
Dismantling to brick tiles or terracing tiles single layers laid on roof including removing the mudfaska or any type o treatment including demolished materials removed from out side defence land complete all as specified and directed by Engineer-in-charge
M&L for Cement Concrete 1:2:4 Type B-0 (using 12.5 mm graded stone aggregate) as in roof kerb or mud stops rounded of chamfered on edge complete all as specified and directed by Engineer-in-Charge.
M&L for 55mm thick PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregate laid as in padding complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface. (b) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm. (c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame. (e) including 20mm thick screed bed Note:- This treatement shall be done by the approved authorized applicators and guarantee of treatement shall be for 10 years.
JAIPAL and BROS
Ashish Sehgal and Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .