REPAIR TO BOUNDARY WALL FENCING RCC JALI AND OTHER BR NATURE WORKS UNDER AGE BR I OF GE (W) AGRA

Amount

Dismantling of RCC posts or struts of any section , including taking out embedded in concrete portion and making good of post hole to fixing of new posts complete all as specified and directed.

All as per item no. 1 above but embedded in natural ground complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete including removing debris outside MD land all as specified and directed.

Dismantling chain link fencing wire, any type any position and any situation complete all as specified and directed.

S&F mild steel angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc, and similar works conforming to Fe-410-0 or Fe-310-0. complete all as specified and directed.

M&L PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

S & F chain link MS Galvanised fencing , made out of 3.15mm dia wire and 100mm mesh size straining and fixed with bolts, nuts and washers including binding wire complete all as specified and directed. Note: Nut and bolts and washer and MS flat line bars/flats bars shall be measured and paid separetly as supplied only all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete including removing debris outside MD land all as specified and directed.

S&F in repair galvanized, 2 strand, steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanized MS wire staples or steel pins etc as specified. (each line wire to be measured) complete all as specified and directed

S&F mild steel screw bolts (machine made) with hexagonal or square head and one end screwed or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut, exc. 5 cm long & diameter of neck 5 to 10mm complete all as specified and directed .

Supply only mild steel in flat, round or square bars confirming to Fe 290 Gde E-165 as line rows for securing chain link fencing complete all as specified and directed Note: Cost of cutting to length, bent to shape required & binding/fixing with MS wire is included in the above rate complete all as specified and directed.

M&L preparation of new steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete including removing debris outside MD land all as specified and directed

Taking down cement plaster of any description on brick, concrete, ceiling surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete including removing debris outside MD land all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, old size straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work except bricks (using old bricks ontained from demolition old size) straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with finished even & smooth complete all as specified and directed.

M&L Providing, cement concrete in roof kerbs of mud stops, rounded or chamfered on edges in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating incl necessary form work if required complete all as specified and directed.

Taking down one way Trellis work (jafri), including taking as under of battens of trellis (posts and rails measured separately) complete all as specified and directed.

M&L providing precast cement concrete 1:2:4 type B0 (using 12.5mm stone aggregate) louvres and jallies, 25mm thick (measured solid) set in cement mortar 1:4 including all mouldings but excluding frame complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wind ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and directed.

M&L RCC (nominal mix) 1:11/2:3, type A-1 (using 20mm graded stone aggregate) as in foundation including rafts, footings, foundationbeams, plinth beams bases for columns etc basement slabs under reamed piles and mass concrete complete all as specified and directed.

M&L RCC (nominal mix) 1:11/2:3, type A-0 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintes over 1.5m span, columns complete all as specified and directed.

M&L RCC (nominal mix) 1:11/2:3, type A-0 (using 20mm graded stone aggregate) as in columns complete all as specified and directed.

Use & waste of formwork to sides of concrete foundation, footings bases of columns, rafts and raft beams side and soffits (if any) of foundation and plinth beams and similar work vertical or to batter, flat, rough finished surface complete all as specified and directed.

Use & waste of formwork to sides and soffits of floor or roof beams, beams beam haunching, girders, bressummers, lintels, cantilevers, shelves includiing supports, overhanges, etc also splaus between floors and beams etc fair finished surfaces complete all as specified and directed.

Use & waste of formworks to sides of pillars, posts struts, piers, columns and stanchions etc fair finsihed surfaces complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 30 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5 m in depth for foundation etc and getting out in soft /loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm with excavated soil complete all as specified and directed.

Removing excavated soil not exc 50m depositing where directed at a level not exc. 1.5 m complete all as specified and directed.

M&L washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 furrowing the under layer with scracthing tool, applying cement slurry on the under layer @3kg of cement per sqm, top layer 15mm cement plaster 1:1/2:2 (1 cement :1/2 course sand :2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified

Cleaning of old grit plaster with Acid and other material as per manufacture instruction complete all as specified and directed.

M&L Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm and not exceeding 0.5 sqm area fixed with and including one number SS clamps (grade-202) of flat 30mmxx 2mm, 150 mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

PD GUPTA AND COMPANY

deva engineers

M/s Shrangi Rishi Construction

MNR ASSOCIATES

SAROJ CONSTRUCTIONS

M/s M S Sharma and Co.

SHRI RADHAYSHYAM JHA