UPGRADATION OF TOILETS NEAR BLDG NO P-217, RENOVATION OF EXISTING DD HALL NEAR BLDG NO 58, PROVN OF TILING, UPVC DOORS AND WINDOWS IN TRG AREA UNDER A DIV OF COLLEGE AREA, MISC B/R WORKS AT SARDAR PATEL BLDG AND IMPROVEMENT AT DSSC WELLINGTON

Amount

B/R PORTION Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises all as specified and as directed.

M & L for digital non skid coloured ceramic tiles 7 to 8mm thick (square /rectangular ) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for digital glazed ceramic coloured tiles of size 600mm x 300mm x 7 mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including rendering layer/ backing coat of 10mm thick in CM (1:4) complete all as specified and as directed.

M & L for providing 25mm thick cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in sub base complete all as specified and as directed.

M & L for vitrified ceramic joints less tiles 8 to 10 mm thick light shade (square /rectangular) area of each tile exc 0.36 Sqm but n.exc 0.42 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

Description all as per item No 5 above but on vertical surfaces, laid over and including 10 mm thick rendering / backing coat in CM (1 :4) complete all as specified and directed.

S & F in repairs Vitreous China coloured WHB of Make : Jaquar, Cat No : CNS-WHT-705 or equivalent in Prayag/ Parryware/ Hindware/ Cera, oval shaped counter top of min size 595 x 420 x 200 mm including waste coupling, PVC waste pipe etc., complete all as specified and as directed.

M & L for Granite stone slab flooring 16-18 mm thick any colour/shade machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, rounding edges as required , laid over and including 15mm thick rendering in CM (1 :4) to be fixed on wash hand basin top etc, flooring and door/window cladding/openings complete all as specified and as directed.

M & L for RCC (1:2:4) (nominal mix) type B-1 (using 20mm graded stone aggregate) as in slab supported in walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc., complete all as specified and as directed.

M & L for use and waste of timber as in flat form work to sides and soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work; not exceeding 200mm thick (Horizontal or Sloping) complete all as specified and as directed.

M & L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

S & F in repairs Vitreous China wash down water closet of Make : Parryware (Cascade Classic), Cat No: C0217 (Coupled Closet) & C0711 (Cistern) or equivalent in Jaquar/ Prayag/ Hindware/ Cera, colour white, closed pattern with flat bottom and soft close seat cover and mild steel chromium plated or aluminised hinging device and P/S trap including connections to drain (or outgoing pipe) complete all as specified and as directed.

S & F in repairs urinal half stall type including spreader and ceramic partition plate complete all as specified and as directed. Make: Parryware, Cat No: C0575 (Magnum) for Half Stall Urinal , Cat No : E8095 - Spreader for New Magnum Urinal, Cat No : C0571- Urinal Partition Plate or equivalent in Prayag/ Jaquar/ Cera/ Hindware

S & F toilet paper holder of stainless steel fixed to wall with chromium plated (CP) brass screws complete all as specified and as directed. Make : Jaquar, Cat No : ACN-1151N or equivalent in Prayag/ Parryware/ Hindware/ Cera

S & F hand drier automatic type all as specified and directed. Make : ABS Hand drier, Model : KH07 or Kallerians or equivalent makes

S & F in repairs 15 mm dia angle cock fancy type chromium plated with long shank and cup complete all as specified and as directed. Make : Jaquar, Cat No : ORP - 10053PM or equivalent in Prayag/ Parryware/ Hindware/ Cera

S & F in repairs CP Health faucet with flexible tube 1 Mtr long complete all as specified and as directed. Make : Jaquar, Cat No : ALD 579 or equivalent in Prayag/ Parryware/ Hindware/ Cera

S & F CP two way bib taps 15 mm bore complete all as specified and as directed. Make : Jaquar, Cat No : ORP 10041PM or equivalent in Prayag/ Parryware/ Hindware/ Cera

S & F two piece type stainless steel gratings square or round 100 mm size complete all as specified and directed.

S & F for 32mm bore brass chromium plated bottle trap for wash hand basin with inlet and outlet, screwed for pipe or connections and with one cleaning cap and fixed complete all as specified directed.

M & L for 100 mm dia PVC floor trap with CP grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and as directed.

S & F Corner glass shelf complete all as specified and as directed. Make : Jaquar, Cat No : ACN-1173 or equivalent in Prayag/ Parryware/ Hindware/ Cera

S & F Soap dispensor complete all as specified and as directed. Make : Jaquar, Cat No : AKB-35735 or equivalent in Prayag/ Parryware/ Hindware/ Cera

S & F in repairs Towel ring complete all as specified and as directed. Make : Jaquar, Cat No : AKB-35721 or equivalent in Prayag/ Parryware/ Hindware/ Cera

S & F stainless steel toilet paper holder complete all as specified and as directed. Make : Jaquar, Cat No : AKB-35753 or equivalent in Prayag/ Parryware/ Hindware/ Cera

S & F PVC connection 15 mm size with PTMT Nuts, 450 mm long complete all as specified and as directed.

S & F in repairs CP bib taps 15 mm bore complete all as specified and as directed. Make : Jaquar, Cat No : ORP - 10037PM or or equivalent in Prayag/ Parryware/ Hindware/ Cera

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.

S & F 15 mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes etc., complete to walls and ceilings or laid in floors all as specified and as directed.

Fixing only 15 mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes etc., complete to walls and ceilings or laid in floors all as specified and as directed. Note : Tubes as obtained from item No 28 shall be incorporated in this item. New fittings as required at site is included in the quoted rate.

S & F 20 mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes etc., complete to walls and ceilings or laid in floors all as specified and as directed.

Fixing only 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., complete to walls and ceilings or laid in floors all as specified and as directed. Note : Tubes as obtained from item No 29 shall be incorporated in this item. New fittings as required at site is included in the quoted rate.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M & L for precast cement concrete solid building block or slab 10cm thick (1:3:6) type C-1 (with plain or interlocking joints as directed) setting in mortar, complete, in walls in CM (1:6) complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc., and removing unserviceable debris off the premises all as specified and as directed.

M & L for rendering 15 mm thick in CM (1:6) on fair faces of brick work / stone work, finished even and smooth without using extra cement complete all as specified and as directed.

Taking door chowkhats or frames with shutter (without taking off shutters from the frames) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and as directed.

M & L for UPVC door white colour all as per manufacturer's direction and as per following specifications all as directed :- (i) The construction profile for UPVC door shall be overall frame sectional size 60 x 58 mm with wall thickness 2.70 +/- 0.2 mm extruded sections. The corners shall be plastic welded. (ii) The hinge side vertical outer frame shall be reinforced with galvanised steel profile of wall thickness 1.2 mm +/- 0.2 mm. The door shall be fixed to walls using 8 mm dia 80 mm long MS screws minimum 3 Nos on each side. (iii) The glazing shall be fixed to door frame with UPVC standard beadings of sectional size 24.05 x 16 mm & 2 mm thick. (iv) The bottom portion of door shutter shall be provided with UPVC board 5 mm thick & 1 mtr in height and the balance shall be glazed excluding the shutter frame area. (v) The shutter shall be fixed to frame using 3 Nos of 3D hinges. The Door shutter shall be provided with 5mm thick sheet glass & 5 mm thick UPVC board with EPDM rubber gasket, one motice lock with powder coated handles and two numbers powder coated MS tower bolts complete all as specified & as directed. Make : Madhu indrusties/AMD overseas Ltd/Gadli industries.

M & L for UPVC fixed ventilators with glazing all as per manufacturer's direction and following specifications :- (i) UPVC ventilator frame shall be made of PVC material confirming to IS 10151. The Ventilator frame shall be made of extruded UPVC section having overall dimension of 60 x 60 mm having wall thickness 2.5 mm ± 0.2 mm . (ii) Corners of wall frame shall be shall be joined by MS galvanized brackets.joints mitred and plastic welded . (iii) The hinge side of vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provide at the bottom of the frame. (iv) Glazing shall be provided with 6mm thick toughened glass fixed with appropriate size beading as per manufacturer's specifications. Make : Madhu indrusties/AMD overseas Ltd/Gadli industries.

Taking down PVC rain water pipes or drain pipes (any size or pattern), including all fittings (measured overall as fixed along the centre line overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S & F for 75mm dia PVC (SWR) pipes, type 'B', single socketted, in any length with rubber ring joints, fixed to walls with suitable MS clamps complete all as specified and as directed.

S & F PVC (SWR) bends 75mm dia all as specified and as directed.

Dismantling Stone slab and tiles laid bedded and pointed in any mortar of any description or thickness in floor, aprons etc., complete all as specified and as directed.

Taking door frame with shutter (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and as directed.

M & L for second class hard wood timber scantling clean sawn framed and fixed complete all as specified and as directed.

S & F for second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

M & L for plain fillets second class hardwwod, sectional area exc 13 sqcm but n.exc 25 Sqcm., square, rectangular or triangular in section, clean sawn, secured with nails plugging to wall complete all as specified and as directed.

M & L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creosote all as specified and directed.

M & L for 12mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces, fixed with screws to timber frame work complete all as specified and as directed.

Extra over rates of block board or vennered plywood of thickness 12mm for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.

M & L for first class hardwood for beading /nosing /moulding as in cornices columns corners etc of cross sectional area n.exc 25 Sqcm complete all as specified and as directed.

S & F for 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty / Aluminium rubber beading in squares exc 0.5 Sqm in each pane complete all as specified and as directed.

S & F for 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S & F for 40mm thick second class hardwood semi-glazed skeleton shutters, open rebated prepared to receive toughned glass at top and 25mm thick wooden timber at bottom portion, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a), supplied and fitted to chowkhat complete all as specified and as directed. Note : Toughned glass shall be measured and paid separately.

S & F for second class hardwood 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauze , etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as in windows and ventilators as specified as in SSR part-I, Section 8, clause 8.24(b), suplied and fitted to chowkats complete all as specified and as directed.

S & F for 6mm thick toughned glass to be fixed in doors and windows frame with beadings and fittings complete all as specified and directed.

S & F for 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S & F 150mm brass tower bolt with cast or sheet barrel and rolled or cast bolts and fixed complete all as specifed and directed.

S & F 300mm brass, sliding bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S & F 150mm brass handles, cast type polished bright complete all as specified and directed.

S & F 125mm brass handles, cast type polished bright complete all as specified and directed.

S & F floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and as directed.

S & F for Toughned glass door 12 mm thick fixed in position with suitable SS fittings; locking arrangements, 600mm size length stainless steel handles etc complete all as specified and as directed.

S & F 12mm thick Toughned glass to be fixed in position with suitable SS fittings etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing unserviceable debris off the premises all as specified and directed.

M & L for providing 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in subbase complete all as specified and as directed.

S & F factory made machine pressed chequered cement concrete coloured tiles of size 300 x 300 x 22mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, laid over and including 20mm thick screed bed in CM (1 :4) complete all as specified and as directed.

Taking down Aluminium door and windows with frame exc 1.5 Sqm and n.exc 4 Sqm (without taking of the shutters from the frame) complete all as specified and as directed.

Forming jambs, etc., to openings (to foregoing item) in cement mortar (1:4) including cutting toothing and properly bonding into old work also facing, jointing and pointing to match existing work complete all as specified and as directed.

S & F for 40mm thick second class hardwood plain framed panelled shutters (any numbers of panels) panels will be curved /desinged timber as approved by GE on both sides (feather edges), and fitted to chowkhats complete all as specified and directed.

S & F 10mm thick one way toughned glass to be fixed in wooden and aluminium frames with suitable SS fittings or rubber beadings etc all as specified and as directed.

M & L for preparation of new or previously untreated wooden surfaces, sizing, filler coat with wood filler liquid transparent and staining with spirit and applying one coat (under coating) varnishing and further finishing coat synthetic varnish complete all as specified and directed.

M & L for 12mm thick granite tiles of approved colour of size 450 x 300mm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M & L for complete removal of existing treatment from old ceiling surfaces and applying two coats of oil bound distemper over and including one coat of primer complete all as specified and directed.

Dismantling plain or corrugated galvalume sheeting any gauge, thickness, in roof covering, ridges, eaves board, etc., complete all as specified and as directed.

Dismantling unframed wooden scantling 40 Sqcm and over in section fixed in roof with or without nails, brads, spikes, etc., and removed from site complete all as specified and as directed.

S & F for rolled mild steel as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc (cut to ordinary length i.e. within 20mm of the length indicated) conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S & F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F Powder coated aluminium (minium thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with for doors, windows, ventilators and partitions (fixed partitions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber /neoprene gasket etc, Aluminium sections shall be smooth, rust free, straight, mitred and joined mechanically wherever required including cleat angle, Aluminium snap neading for glazing/ paneling, C.P brass/stainless steel screws, all complete as per architectural drawings and as directed.

S & F Powder coated aluminium (minium thickness of powder coating 50 micron) for shutters of doors, windows, ventilators including providing and fixing hinges /pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber /neoprene gasket required fittings (fittings shall be paid for seperately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conformingto IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including cleat angle, Aluminium snap beading for glazing/ paneling, C.P brass/ stainless steel screws all complete as per architectural drawings and as directed.

M & L for prelaminated Particle board 12mm thick exterior grade prelaminated both side with decorative choice laminations fixed with screws to timber frame work or to aluminium frames as in doors and partitions complete all as specified and as directed.

M & L for modular false ceiling systems in ArmGym-FB for Vinyl face, Washable metallized polyester foil backing vinyl covered edges of 09mm thickness of size 595mm x 595mm GRG ceiling tiles shall have weight 7 Kg /Sqm and fixed with bottom face powder coated suspension system (Grid). The size of the same is 24mm x 32mm. The galvanized iron sheet of thick 0.30 mm used in the manufacturing of grid is zinc coated for preventing corrosion. The main runners are hung from the soffit with help of GI wire hanger complete with installation all as manufacturers instruction and as directed. Make: Armstrong/ Diamond/ Saint Gobain.

M & L for UPVC windows sliding type including fixed ventilator complete all as per manufacturer's direction and following specifications :- (i) UPVC Window frame shall be made of material confirming to IS 10151 the window frame shall be made of extruded UPVC section having over all dimension of 65 x 55 having wall thickness 2mm +/- 0.2mm. (ii) Corners of frame shall be jointed by MS galvanized brackets mitred and plastic welded. (iii) The profiles should be three chamber system which shall provide high insulation properties (iv) Glazing shall be 4mm thick plain glass fixed in frames with appropriate beading as per manufacturer's specification. (v) Suitable locking arrangement shall be provided with each window shutter. Make : Madhu Industries / AMD Overseas Ltd/ Gadli Industries

S & F in repairs rotational moulded polythene water storage tanks, 1000 Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polyethene float and fly nut complete, screwed for iron pipe all as specified and as directed.

S & F in repairs 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

E/M PORTION Taking down carefully old existing unserviceable Aluminium /Copper batten /surface conduit /concealed conduit point wiring (light/exhaust fan/socket/call bell/ Power point) complete including (fittings and fixtures such as switches, ceiling roses, shades, brackets, sockets, holders, light fittings, call bells, Fluorescent tube light fitting) removing the Un-Serviceable/chargeable etc. retrieved materials from site of work & making good the disturbed surfaces of walls/floors/ ceilings etc. complete all as specified and as directed. Note : Old existing 2' x 2' light fittings & PVC Exhaust fans of any size /type taken down /dismantled to be deposited to MES E/M Storeyard & cost of transportation of the same from site of work to MES E/M Storeyard is deemed to be included in the unit quoted rates.

Disconnecting /dismantling of old existing un serviceable DB's any way 240 /415 Volts with their old/unserviceable burnt MCBs complete all as specified and directed.

M & L for point wiring with 1.5 Sq mm, PVC insulated, FRLS, single core, copper conductor cable, 1100 Volt grade, multi stranded drawn through and including medium grade Rigid non metalic PVC conduit conealed in wall /ceiling /roof etc with all necessary accessories for One light/exhaust fan/call bell/5A Independent point controlled by one switch with and including continuous 1.5 Sqmm PVC insulated single core copper conductor cable earth continuity conductor connected to common earth and earth dolly complete all as specified and directed. Make of cable : Havells/Polycab/Finolex.

Note: (i) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth. (ii) The cost of cutting chases (if any) and making good the disturbed surfaces is deemed to be included in the unit quoted rates.(iii) Modular flush boxes will be measured & paid seperately. (iv) Contr/Firm is required to visit the site of work for any doubts/clarifications w.r.t. specifications/qty/location etc. before quoting of the Tender. Any query/clarifications etc. after conclusion of the Contract shall NOT be entertained & decision of the AO shall be final & binding.

Description all as per Item No 89 above but with PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor for 16A switch socket complete all as specified and as directed.

M & L for sub-main wiring alongwith earth wire of size (4 x 6.0) sq. mm + (2 x 6.0) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVCrigid conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Note: (i) 04 runs of PVC wire, 02 runs of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.

M & L for sub-main wiring alongwith earth wire of size (2 x 6.0) sq. mm + (1 x 6.0) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVCrigid conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Note : (i) 02 runs of PVC wire, 01 run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.

Description all as per Item No 92 above but of size (2 x 4.0) sq. mm + (1 x 4.0) sq. mm complete all as specified and as directed.

Description all as per Item No 92 above but of size (2 x 2.5) sq. mm + (1 x 2.5) sq. mm complete all as specified and as directed.

S & F Modular switch, one way, 10 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVSXXW061, or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVSXXW161 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACVKSWW063 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVKCWW163 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

Note for Item Nos 95 to 98 : Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned.

S & F and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX01/02 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACTXMIIX03 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F and concealing modular metal flush box suitable for fixing switches/sockets of 4 modules all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACTXMIIX04 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F and concealing modular metal flush box suitable for fixing switches/sockets of 6 modules all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACTXMIIX06 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F modular cover plate suitable for fixing switches/sockets of 1/2 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV01/02 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F modular cover plate suitable for fixing switches/sockets of 3 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV03 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F modular cover plate suitable for fixing switches/sockets of 4 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV04 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F modular cover plate suitable for fixing switches/sockets of 6 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV06 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab Note for Item Nos 99 to 106 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.

S & F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/Legrand/Anchor

S & F wall / surface mounted LED light fitting 10 W or next higher rating (2 FT), CRI > 80, CT=3000 K (Warm White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size incl flexible hose complete all as specified and as directed. Make : Luker, Cat No : LT510 or techno-commercially equivalent in Philips /Jaquar/Havells.

S & F wall / surface mounted LED light fitting 20 W or next higher rating (4 FT), CRI > 80, CT=3000 K (Warm White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size incl flexible hose complete all as specified and as directed. Make : Luker, Cat No : LT520 or techno-commercially equivalent in Philips /Jaquar /Havells.

S & F recess panel LED DOWNLIGHT fitting 9 W or next higher rating, CRI > 80, CT=3000 K (Warm White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Luker, Cat No : LNPR09 or techno-commercially equivalent in Philips /Jaquar/Havells.

S & F ceiling/wall/panel mounted LED TRACKLIGHT (WHITE COLOUR) 12 W or next higher rating suitable for Track Channel 1/2 Mtrs span, CRI > 80, CT=3000 K (Warm White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Luker, Cat No : LSPT12 or techno commercially equivalent in Philips/Jaguar/Havells. Note : Track Channel 1/2 Mtrs span shall be measured & paid separately under relevant items.

S & F ceiling/wall/panel mounted LED TRACK CHANNEL (WHITE COLOUR) 2 Mtrs length suitable for mounting of 03 Nos Tracklights 12 W, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Luker, Cat No : LTM2 or techno-commercially equivalent in Philips /Jaquar /Havells. Note: Track Lights 12 W shall be measured & paid separately under relevant items.

S & F ceiling/wall/panel mounted LED TRACK CHANNEL (WHITE COLOUR) 1 Mtrs length suitable for mounting of 03 Nos Tracklights 12 W, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Luker, Cat No : LTM1 or techno-commercially equivalent in Philips/Jaquar /Havells. Note : Track Lights 12 W shall be measured & paid separately under relevant items.

S & F wall/panel mounted LED PICTURE LIGHT (BRONZE/GOLDEN COLOUR) 12 W or next higher rating suitable for picture/image/portrait lighting, adjustable/movable type, CRI > 80, CT=3000 K (Warm White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Philips, Cat No : 919216000000 or techno-commercially equivalent in Havells/ Luker/ Jaquar.

S & F ceiling/wall/panel/false ceiling mounted LED STRIP LIGHT, 6 W, 12 V or next higher rating, CRI > 80, CT=3000 K (Warm White), integrated type with all accessories internally prewired and including connecting up with and including with suitable LED Striplight drivers with twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Luker, Cat No : LS2835 or techno-commercially equivalent in Philips /Jaquar/Havells. Note : LED Strip Light Drivers shall be measured & paid separately under relevant items.

S & F ceiling/wall/panel/false ceiling mounted LED STRIP LIGHT DRIVER, 12.5 A suitable for Strip Lights 6 W, 12 V or next higher rating, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Luker, Cat No : LSD12 or techno-commercially equivalent in Philips /Jaquar /Havells. Note : LED Strip Lights shall be measured & paid separately under relevant items.

Supply, install, testing & commissioning of Exhaust fan, PVC body with automatic back shutter louvers 250 mm sweep, 1280 RPM or more, Air Delivery not less than 860 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified and as directed. Make : Havells, Cat No: Ventil Air - DX White or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates.

S & F MCB, DB, TPN, 4 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBTPN004DD or techno-commercially equivalent in SIEMENS/LEGRAND.

S & F MCB, TPN, 10KA, 415V, "C" curve, 40 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : BB40400C or techno-commercially equivalent in SIEMENS/LEGRAND.

S & F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make : L & T, Cat No : BB10320C or techno-commercially equivalent in Legrand /SIEMENS.

Note for Item Nos 108 to 120 : (i) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned. (ii) Makes of MCCB/MCB DB Enclosures & MCCBs/MCBs/Change-over switch etc. shall be the same.

M&L for 25mm (external dia) rigid non-metallic medium grade PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, cable ties etc. for laying/passing of cable etc. complete all as specified and as directed.

M & L for 40mm (external dia) rigid non-metallic medium grade PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, cable ties etc. for laying/passing of cable etc. complete all as specified and as directed.

AM BUILDERS

P K ENTERPRISES

M/S.RANGA AND CO