To Be Opened

Works

Civil Works

Providing and Fixing Interlocking Tiles (Including Const. of Drain) in Village- Anwarghar, YEA. WC-06

Yamuna Expressway Industrial Development Authority

YAMUNA EXPRESSWAY INDUSTRIAL DEVELOPMENT AUTHORITY | Gautam Buddha Nagar, Uttar Pradesh

Amount: ₹1.3 CrCloses: 18 Jun 2026Closed

Timeline

Published9 Jun 2026
Closed18 Jun 2026
Bid Opening19 Jun 2026

Tender Value

₹1.3 Cr

EMD Value

₹2.6 L

Closing Date

18 Jun 2026, 5:00 pmClosed

Tender Inviting Organisation

Name

GM(P)

Address

YAMUNA EXPRESSWAY INDUSTRIAL DEVELOPMENT AUTHORITY

Work Description

Providing and Fixing Interlocking Tiles (Including Const. of Drain) in Village- Anwarghar, YEA. WC-06

Tender Information

Tender ID

2026_YEIDA_1157329_41

Reference Number

YEA/GM(PROJECT)/2026/517 DT-04/06/2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Fixed-rate

Period of Work

120 days

Location

YAMUNA EXPRESSWAY INDUSTRIAL DEVELOPMENT AUTHORITY

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

5 documents required · 5 mandatory

Fee/PreQual/Technical

RequiredFINANCIAL STATEMENT,TURNOVER,GST,PAN,AADHAR,PROP./PRTN./LTD.CO.CERTIFICATE,AUTHORITY LETTER,ETC (.pdf)

RequiredTENDER FEE,EMD, Rs.100/- NON JUDICIAL STAMP PAPER ALONGWITH Re.1/- REVENUE STAMP (.pdf)

RequiredAPPENDIX A TO E (.pdf)

RequiredOTHER REQUISITES AS PER TENDER DOCUMENTS (.pdf)

Finance

RequiredFINANCIALBID (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,465

EMD Fee Amount

₹2.6 L

Important Dates

Last Activity

9 Jun 2026

Published

9 Jun 2026

Bid Opening

19 Jun 2026

Download Starts

9 Jun 2026

Download Ends

18 Jun 2026

Submission Starts

9 Jun 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (12 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (Based on SOR UP PWD 2020)
2	Providing and laving 60 mm thick factory made cement concrete Interlocking paver block(ISI Marked) made by block making machine with strong vibratory compaction of approved size design, shape, laid in required color and pattern over and including average 50 mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per direction of Engineer -in - charge with conforming (UP PWD SOR 2020) (New SOR Based DAR 16.68)	-	Sqm	1	-
3	Providing & Laying in position machine batched and machine mixed design mix M-25 gradement concrete for reinforced cement concrete work using cement content as per approved design mix including pumping of concrete to site od laying but excluding the cost of centering shuttering, finishing and reinforcement, including admixtures in recommended proportions as per I:S 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge (Note:- Cement content considered in this item is @ 330 kg/cum, Excess/less cement used as oer design mix is payable/recoverable seperately). All works upto plinth DAR-18/5.33.1	-	Cum	1	-
4	Providing and laying in position cement concrete with 4 cm gauge approved stone ballast corse sand and cement in pro of 8:4:1 including supply of all material labour tools and plants etc req for proper comp of work	1	Cum	-	-
5	M-150 brick work in 1:4 cement & Course sand 150 mortar in foundation and plinth including supply of all materials labour complection of the work compiation of work 1:4	1	Cum	-	-
6	12mm Cement Plaster of mix 1:6 (1 cement : 6 coarse sand)	1	Sqm	-	-
7Cement Concrete with 4cm gauge approved stone ballast corse sand and cement in the propertion of 4:2:1 including supply of all material labour tools and plants etc required for proper completion of the work. Same as above item no.279 but with 2cm gauge stone grit in stend of 4cm gauge stone lallast. UP PWD SOR-2020/DAR-18/279a
8	Supply of good earth work banking excavated earth in layers not exceeding 20 cm in depth breaking clods watering rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonne and dressing up in embankments for roads flood banks marginal banks and guide banks or filling up ground depressions all lead as per (a.r.) for all kind of soils	1	Cum	-	-
9.01	centering & shuterring including strutting propping etc & removal of form for: Foundation , footing bases of colums etc for mass concrete	-	Sqm	-	-
9.02	centering & shuterring including strutting propping etc & removal of form for: Wall (any thickness) including attached pilasters, Butteresses, plinth and string couses etc	-	Sqm	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 3.09 MB

Work Item Documents

BOQ_2171213.xls

BOQ • 0.26 MB

41.pdf

Tender Documents • 1.23 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (Based on SOR UP PWD 2020)
2	Providing and laving 60 mm thick factory made cement concrete Interlocking paver block(ISI Marked) made by block making machine with strong vibratory compaction of approved size design, shape, laid in required color and pattern over and including average 50 mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per direction of Engineer -in - charge with conforming (UP PWD SOR 2020) (New SOR Based DAR 16.68)	-	Sqm	1	-
3	Providing & Laying in position machine batched and machine mixed design mix M-25 gradement concrete for reinforced cement concrete work using cement content as per approved design mix including pumping of concrete to site od laying but excluding the cost of centering shuttering, finishing and reinforcement, including admixtures in recommended proportions as per I:S 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge (Note:- Cement content considered in this item is @ 330 kg/cum, Excess/less cement used as oer design mix is payable/recoverable seperately). All works upto plinth DAR-18/5.33.1	-	Cum	1	-
4	Providing and laying in position cement concrete with 4 cm gauge approved stone ballast corse sand and cement in pro of 8:4:1 including supply of all material labour tools and plants etc req for proper comp of work	1	Cum	-	-
5	M-150 brick work in 1:4 cement & Course sand 150 mortar in foundation and plinth including supply of all materials labour complection of the work compiation of work 1:4	1	Cum	-	-
6	12mm Cement Plaster of mix 1:6 (1 cement : 6 coarse sand)	1	Sqm	-	-
7Cement Concrete with 4cm gauge approved stone ballast corse sand and cement in the propertion of 4:2:1 including supply of all material labour tools and plants etc required for proper completion of the work. Same as above item no.279 but with 2cm gauge stone grit in stend of 4cm gauge stone lallast. UP PWD SOR-2020/DAR-18/279a
8	Supply of good earth work banking excavated earth in layers not exceeding 20 cm in depth breaking clods watering rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonne and dressing up in embankments for roads flood banks marginal banks and guide banks or filling up ground depressions all lead as per (a.r.) for all kind of soils	1	Cum	-	-
9.01	centering & shuterring including strutting propping etc & removal of form for: Foundation , footing bases of colums etc for mass concrete	-	Sqm	-	-
9.02	centering & shuterring including strutting propping etc & removal of form for: Wall (any thickness) including attached pilasters, Butteresses, plinth and string couses etc	-	Sqm	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (Based on SOR UP PWD 2020)

Providing and laving 60 mm thick factory made cement concrete Interlocking paver block(ISI Marked) made by block making machine with strong vibratory compaction of approved size design, shape, laid in required color and pattern over and including average 50 mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per direction of Engineer -in - charge with conforming (UP PWD SOR 2020) (New SOR Based DAR 16.68)

Sqm

Providing & Laying in position machine batched and machine mixed design mix M-25 gradement concrete for reinforced cement concrete work using cement content as per approved design mix including pumping of concrete to site od laying but excluding the cost of centering shuttering, finishing and reinforcement, including admixtures in recommended proportions as per I:S 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge (Note:- Cement content considered in this item is @ 330 kg/cum, Excess/less cement used as oer design mix is payable/recoverable seperately). All works upto plinth DAR-18/5.33.1

Cum

Providing and laying in position cement concrete with 4 cm gauge approved stone ballast corse sand and cement in pro of 8:4:1 including supply of all material labour tools and plants etc req for proper comp of work

Cum

M-150 brick work in 1:4 cement & Course sand 150 mortar in foundation and plinth including supply of all materials labour complection of the work compiation of work 1:4

Cum

12mm Cement Plaster of mix 1:6 (1 cement : 6 coarse sand)

Sqm

7Cement Concrete with 4cm gauge approved stone ballast corse sand and cement in the propertion of 4:2:1 including supply of all material labour tools and plants etc required for proper completion of the work. Same as above item no.279 but with 2cm gauge stone grit in stend of 4cm gauge stone lallast. UP PWD SOR-2020/DAR-18/279a

Supply of good earth work banking excavated earth in layers not exceeding 20 cm in depth breaking clods watering rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonne and dressing up in embankments for roads flood banks marginal banks and guide banks or filling up ground depressions all lead as per (a.r.) for all kind of soils

Cum

9.01

centering & shuterring including strutting propping etc & removal of form for: Foundation , footing bases of colums etc for mass concrete

Sqm

9.02

centering & shuterring including strutting propping etc & removal of form for: Wall (any thickness) including attached pilasters, Butteresses, plinth and string couses etc

Sqm